Home > Nvidia > Computer Accessories > Nvidia 3d Vision 2 User Guide

Nvidia 3d Vision 2 User Guide

    Download as PDF Print this page Share this page

    Have a look at the manual Nvidia 3d Vision 2 User Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 9 Nvidia manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 639
    							6nV IDI a 3D V I sIon U seR GUID e
    Do not block this side of your glasses. It must be in-line-of-sight with the IR emitter
    ON button 
    Indicator Light: To check the batter y life, press the ON button.  If the indicator light is:  Green: Up to 60 hours of batter y life.  Red: flashing red indicates two hours or less batter y life 
    Amber LED: light flashes amber  when charging. s olid amber when  fully charged.
    Usb connection to charge glasses
     
     
    If you are charging the wireless glasses by connecting them to your 
    PC using a Usb cable, make sure your PC does not go into power 
    save mode. When your PC goes into power save mode, the wireless 
    glasses are no longer charging. To fix this, disable any power saving 
    options on your PC under the Windows Control Panel. a lternatively, 
    you can use a Usb wall charging device to charge the glasses directly 
    from your wall power outlet without connecting to the PC. You can 
    use your glasses while they are charging.
    Using the Glasses
    It is a good idea to keep the glasses in the protective pouch when you 
    are not using them. When wearing your glasses, you must be in-line-
    of-sight with the IR emitter. Press the ON button to turn the glasses 
    on. The glasses turn off automatically when there is no activity.
    Caution: The wireless glasses are not prescription eye wear, sunglasses, nor a protective goggle. Do not use the glasses for any general eye wear purposes (e.g., driving, reading, protection from sunlight or ultraviolet light, etc.) as such use 
    may result in injur y.
    02           
    						
    							UnPa CKIn G e qUIP men T7
    Changing the nose Piece
    Your wireless glasses come with three interchangeable nose pieces 
    to give you a comfor table fit. s imply pull out the current nose piece 
    and inser t the one that fits you best.
    Pull the nose piece out as shown and snap another nose piece in place
    USB IR Emitter  
    (included with the 3D Vision glasses kit)
    3D Vision products such as desktop monitors, projectors, and some 
    3D Vision notebooks use the U sb IR emitter to communicate to the 3D 
    Vision glasses.  Please view the diagrams below for information on 
    how to use your Usb IR emitter.
    Note: some 3D Vision n otebook have a built-in 3D Vision IR emitter. Please check with your notebook manufacturer to 
    determine if you need the U sb IR emitter.
    There is a thumbwheel on the back of the emitter that can be used to 
    increase/decrease depth in a game. 
     3D Vision on/off switch
     
    Thumbwheel to adjust stereoscopic depth in-game
    V esa stereo cable connection to display (f or use with D lP HDT V displays only.) 
    Power indicator light
    U sb  connection to your computer
    The effective range of the IR e mitter is 15 feet. 
    						
    							8nV IDI a 3D V I sIon U seR GUID e
    02
    WARNING: Infrared Device Safety  
    Cl a SS 1 l ED pRODUCT This product includes an Infrared light-emitting diodes for transmitting signals from the controller to the glasses. although this invisible beam is not considered harmful, and complies with EN60825-1 (IEC60825-1), we recommend the following precaution: when the Infrared device is transmitting:
     >Do not stare into the emitter
     >Do not view directly with optical instruments
    No par ts in the device may be ser viced by the user.
       
    						
    							InsTa ll a TIon a n D seT UP9
    R T
    Y
    H
    G
    F
    D
    C V
    X 7
    6
    5
    F6F5F4
    3D      (Triangle Down) Decrease stereoscopic 3D depth
    3D      (Power Button) 3D Vision on /off button
    3D      (Triangle Up) Increase stereoscopic 3D depth
    Built-in 3D Vision IR Emitter The minimum viewing distance  from the emitter is 9 inches (23 cm).  location of emitter may var y  depending on notebook.
    Built-in IR Emitters
    3D Vision products with b uilt-In IR emitters do not require the U sb 
    IR emitter and will communicate directly with the 3D Vision glasses.  
    Please view the diagrams below for now to use 3D Vision you’re your 
    product.
    3D Vision notebooks 
    most 3D Vision n otebooks will have special function hot keys on the 
    laptop for controlling 3D Vision, just like the hot keys for controlling 
    brightness or audio volume. These hot keys. Please check with 
    your manufacturer to ensure your laptop has the 3D Vision hot keys 
    pictured below.
    Note: The effective range of the notebook b uilt-in IR emitter  is 10 feet.
      
    						
    							10nV IDI a 3D V I sIon U seR GUID e
    02
    3D Vision l CD monitors and a ll-In-one PCs 
    m ost 3D Vision l CD monitors and a ll-in-one PCs will not have keys 
    for controlling 3D Vision when playing 3D content.  You can control 3D 
    using the following keyboard shor tcuts:
    > 3D on /off – CTR l-T
    > Increase stereoscopic 3D depth – CTR l-f 4
    > Decrease stereoscopic 3D depth – CTR l-f 3
    Note: The effective range of the Desktop l CD built-in IR e mitter is 15 feet.  The effective range of the a ll-In-one PC b uilt-in IR emitter is 10 feet.  
    						
    							InsTa ll a TIon a n D seT UP11
    Wired Glasses 
    3D Vision Wired Glasses are designed to work with 3D Vision-Ready 
    displays. The Wired Glasses do not use the U sb IR emitter that 
    comes with 3D Vision Wireless Glasses kits and 3D Vision n otebooks. 
    USB Cable 
    This cable is permanently attached to the Wired Glasses and is not a removable cable.  You can use Usb extender cables to increase the length of this cable.
    USB Plug
    ensure the 3D Vision Controller Driver is installed before plugging in the Wired Glasses.
    Indicator Lights 
    n o driver installed 
    3D o ff; driver installed properly
    3D on
    Nose piece
    Replace with one of three sizes for a comfortable fit.
    Note: You can toggle 3D o n/off and adjust 3D Depth using 3D Vision’s keyboard shor tcuts.  Please consult the User Guide 
    available online at w w w.nvidia.com/Get3D for more information.            
    						
    							12nV IDI a 3D V I sIon U seR GUID e
    02
    Changing the nose Pieces 
    Your wireless glasses come with three interchangeable nose pieces 
    to give you a comfor table fit. s imply pull out the current nose piece 
    and inser t the one that fits you best.
    securing Wired Glasses
    3D Vision Wired Glasses can also be secured to be a PC using the 
    notch in the U sb plug and notebook security devices.   n VIDIa has 
    tested Kensington notebook security devices to attach the glasses to 
    a PC tower or table. 
    Pull the nose piece out as shown and snap another nose piece in place.
    USB
    security device cut out location          
    						
    							 13
    03
    INSTalla TION a ND SETU p
    Installing the hardware and software to your computer 
    system is pretty straightfor ward. 
    Note: before beginning the installation, make sure your  wireless glasses are fully charged. s ee Charging the Glasses on page 6. 
    Download the Latest Software
    Required action before You s tart the Installation 
     
    If your notebook with built-in 3D Vision IR e mitter includes nVIDIa 3D 
    Vision glasses, drivers are already installed on your notebook 120Hz. 
    Please launch the " set up 3D Vision" shor tcut on your Windows 
    desktop to set up 3D the first time.
    120Hz
    If your l CD monitor includes n VIDIa 3D Vision glasses in the box or 
    you want to ensure you have the latest drivers for your l CD monitor, 
    visit w w w.nvidia.com/3DUpdate to download the latest drivers. 
    If you purchase Wired Glasses kit, you must download the driver CD 
    from w w w.nvidia.com/3DUpdate.   
    						
    							14nV IDI a 3D V I sIon U seR GUID e
    03
    Installation
    Connecting the Display  
    (skip this step if you are using a 3D Vision notebook)
    1. Connect your 3D Vision Ready display to your n VIDIa graphics 
    card. The display you connect must be a 3D Vision Ready l CD or 
    analogue CRT display. for lCDs use the dual-link DVI-to-DVI 
    cable supplied with the display.
    Note: Connect onl Y the display now. The driver and software must be installed prior to connecting the U sb IR emitter.
    see the following pages for connection diagrams.  
    						
    							 15
    Dlp HDTV Connection Diagram
    Note: Check your D lP’s user manual to see if there is a specific HD mI por t used to connect a PC to your HDT V. In addition, change the input mode on the T V’s menu to be PC or Computer to ensure the T V can process the video signal correctly. 
    Note: The DVI-to-HD mI Cable is not included with your 3D Vision kit. Please obtain one from a computer or electronics store.
    IR EmitterPC
    DLP
    HDMI Port
    VESA 3-pin  stereo cable 
    3D Glasses  Emitter Port
    DVI-to-HDMI Cable
    DO NOT MAKE THIS CONNECTION UNTIL TOLD TO DO SO BY THE INSTALL WIZARD
    USB Cable
    USB   DVI                                             
    						
    All Nvidia manuals Comments (0)