Nvidia 3d Vision 2 User Guide

							8nV IDI a 3D V I sIon U seR GUID e
02
WARNING: Infrared Device Safety  
Cl a SS 1 l ED pRODUCT This product includes an Infrared light-emitting diodes for transmitting signals from the controller to the glasses. although this invisible beam is not considered harmful, and complies with EN60825-1 (IEC60825-1), we recommend the following precaution: when the Infrared device is transmitting:
 >Do not stare into the emitter
 >Do not view directly with optical instruments
No par ts in the device may be ser viced by the user.
   
						

							InsTa ll a TIon a n D seT UP9
R T
Y
H
G
F
D
C V
X 7
6
5
F6F5F4
3D      (Triangle Down) Decrease stereoscopic 3D depth
3D      (Power Button) 3D Vision on /off button
3D      (Triangle Up) Increase stereoscopic 3D depth
Built-in 3D Vision IR Emitter The minimum viewing distance  from the emitter is 9 inches (23 cm).  location of emitter may var y  depending on notebook.
Built-in IR Emitters
3D Vision products with b uilt-In IR emitters do not require the U sb 
IR emitter and will communicate directly with the 3D Vision glasses.  
Please view the diagrams below for now to use 3D Vision you’re your 
product.
3D Vision notebooks 
most 3D Vision n otebooks will have special function hot keys on the 
laptop for controlling 3D Vision, just like the hot keys for controlling 
brightness or audio volume. These hot keys. Please check with 
your manufacturer to ensure your laptop has the 3D Vision hot keys 
pictured below.
Note: The effective range of the notebook b uilt-in IR emitter  is 10 feet.
  
						

							10nV IDI a 3D V I sIon U seR GUID e
02
3D Vision l CD monitors and a ll-In-one PCs 
m ost 3D Vision l CD monitors and a ll-in-one PCs will not have keys 
for controlling 3D Vision when playing 3D content.  You can control 3D 
using the following keyboard shor tcuts:
> 3D on /off – CTR l-T
> Increase stereoscopic 3D depth – CTR l-f 4
> Decrease stereoscopic 3D depth – CTR l-f 3
Note: The effective range of the Desktop l CD built-in IR e mitter is 15 feet.  The effective range of the a ll-In-one PC b uilt-in IR emitter is 10 feet.  
						

							InsTa ll a TIon a n D seT UP11
Wired Glasses 
3D Vision Wired Glasses are designed to work with 3D Vision-Ready 
displays. The Wired Glasses do not use the U sb IR emitter that 
comes with 3D Vision Wireless Glasses kits and 3D Vision n otebooks. 
USB Cable 
This cable is permanently attached to the Wired Glasses and is not a removable cable.  You can use Usb extender cables to increase the length of this cable.
USB Plug
ensure the 3D Vision Controller Driver is installed before plugging in the Wired Glasses.
Indicator Lights 
n o driver installed 
3D o ff; driver installed properly
3D on
Nose piece
Replace with one of three sizes for a comfortable fit.
Note: You can toggle 3D o n/off and adjust 3D Depth using 3D Vision’s keyboard shor tcuts.  Please consult the User 
Guide available online at w w w.nvidia.co.uk/Get3D for more information.            
						

							12nV IDI a 3D V I sIon U seR GUID e
02
Changing the nose Pieces 
Your wireless glasses come with three interchangeable nose pieces 
to give you a comfor table fit. s imply pull out the current nose piece 
and inser t the one that fits you best.
securing Wired Glasses
3D Vision Wired Glasses can also be secured to be a PC using the 
notch in the U sb plug and notebook security devices.   n VIDIa has 
tested Kensington notebook security devices to attach the glasses to 
a PC tower or table. 
Pull the nose piece out as shown and snap another nose piece in place.
USB
security device cut out location          
						

							 13
03
INSTalla TION a ND SETU p
Installing the hardware and software to your computer 
system is pretty straightfor ward. 
Note: before beginning the installation, make sure your  wireless glasses are fully charged. s ee Charging the Glasses on page 5. 
Download the Latest Software
Required action before You s tart the Installation 
 
If your notebook with built-in 3D Vision IR e mitter includes nVIDIa 3D 
Vision glasses, drivers are already installed on your notebook 120Hz. 
Please launch the " set up 3D Vision" shor tcut on your Windows 
desktop to set up 3D the first time.
120Hz
If your l CD monitor includes n VIDIa 3D Vision glasses in the box or 
you want to ensure you have the latest drivers for your l CD monitor, 
visit w w w.nvidia.co.uk/3DUpdate to download the latest drivers. 
If you purchase Wired Glasses kit, you must download the driver CD 
from w w w.nvidia.co.uk/3DUpdate.   
						

							14nV IDI a 3D V I sIon U seR GUID e
03
Installation
Connecting the Display  
(skip this step if you are using a 3D Vision notebook)
1. Connect your 3D Vision Ready display to your n VIDIa graphics 
card. The display you connect must be a 3D Vision Ready l CD or 
analogue CRT display. for lCDs use the dual-link DVI-to-DVI 
cable supplied with the display.
Note: Connect onl Y the display now. The driver and software must be installed prior to connecting the U sb IR emitter.
see the following pages for connection diagrams.  
						

							 15
Dlp HDTV Connection Diagram
Note: Check your D lP’s user manual to see if there is a specific HD mI por t used to connect a PC to your HDT V. In addition, change the input mode on the T V’s menu to be PC or Computer to ensure the T V can process the video signal correctly. 
Note: The DVI-to-HD mI Cable is not included with your 3D Vision kit. Please obtain one from a computer or electronics store.
IR EmitterPC
DLP
HDMI Port
VESA 3-pin  stereo cable 
3D Glasses  Emitter Port
DVI-to-HDMI Cable
DO NOT MAKE THIS CONNECTION UNTIL TOLD TO DO SO BY THE INSTALL WIZARD
USB Cable
USB   DVI                                             
						

							16nV IDI a 3D V I sIon U seR GUID e
03
120 Hz l CD Connection Diagram for US b IR Emitter
IR EmitterPC
LCD 
DVI
DO NOT MAKE THIS CONNECTION UNTIL TOLD TO DO SO BY THE INSTALL WIZARD
USB Cable
Dual Link DVI cable (supplied with the display)
USB    DVI                                                  
						

							 17
120 Hz lCD Connection Diagram for l CD monitors with b uilt in IR Emitters
Note: lCD m onitors with b uilt in IR emitters do not require additional U sb connectors from the PC to the monitor.
PC
LCD 
DVI
Dual Link DVI cable (supplied with the display)
    DVI