Oce ColorWave 600 User Manual

							#
Illustration
Action Open the correct media drawer
to load the new media roll.
1 Place 
the new media roll on the
roll loading
 station.
2 Pull the handle of the roll holder
locking mechanism towards you.3
Chapter 5
 - Use the printing system 151Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Slide the roll holder in the core
of the
 new media roll.
4 Align the roll with the correct
size 
indicator on the roll holder
(At 
the left and right hand side).
Release the handle of the locking
mechanism.
5 Remove the tapes from 
the new
media roll.
 Use both hands (as
indicated) 

to place the media roll
in 
the media drawer. 6
Chapter 5
 - Use the printing system152Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Keep the media tight on the roll
and in-line with the side edge.
7 Use both hands to turn the me-
dia 
roll backwards until the me-
dia flap has passed the metal pa-
per guide (1). 8
Chapter 5
 - Use the printing system 153Load a
 media roll
Downloaded From ManualsPrinter.com Manuals
1  
						

							Illustration
Action Use both hands to slide the me-
dia under the metal paper guide.
A "beep" confirms the correct
paper transport
 (2).
9 Close the media drawer.
Note:
Do not open the 'Media
drawer' during loading.10
Chapter 5
 - Use the printing system154Load a
 media roll
Downloaded From ManualsPrinter.com Manuals
2  
						

							Illustration
Action The following screen appears on
the printer operator panel.Note:
When you load a media
roll the printer automat-
ically detects the roll
width. 
If the detected
roll width
 
is not a stan-
dard width,
 the printer
selects the

 next smaller
roll

 width that 
is sup-
ported by
 the printer. 11
 /
B Chapter 5
 - Use the printing system 155Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Define the media type and the core size
How to define the media type and the core size
#
Illustration
Action If the displayed media type and core size is correct you
can press 'Next' and go to step 4.
Otherwise, 
press 'Other media' and continue with step
2.
1 Use 
the 'Scroll wheel' to select the correct media type
from 
the list and confirm your entry with the 'Confir-
mation 
key'.
Note:
If the correct media type is not available on
your 
printer operator panel, you must first
make 
a new media profile available on the
printer 
operator panel. (see  ‘Make a new media
profile available on the printer operator panel’
on page

 161) 2
Use the 'Scroll wheel' to select the correct core size for
your 
new media roll and confirm your entry with the
'Confirmation
 
key'.
Note:
The standard roll core size for the 'Océ Color-
Wave ®
 
600 Printer' is 3". 3
Chapter 5
 - Use the printing system156Define the media type and the core size
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Use the 'Scroll wheel' to select the clean-cut length for
your new media roll and confirm your entry with the
'Confirmation
 
key'
Note:
Select 'Long strip' for new media. 4
Press 'Finish' and return to the 'Home' screen.
Note:
When the strip is cut, the new media is ready
for use.5
Chapter 5
 - Use the printing system 157Define the media type and the core size
Downloaded From ManualsPrinter.com Manuals 
						

							The output delivery
Introduction
There are four factors that can influence the delivery destination of the printed output.
1. The 
media profile of the media you use.
Some media profiles require a specific output delivery. If the correct media profile is available
on 
your printer operator panel, the Océ ColorWave 600 automatically selects the correct
output 
delivery.
If 
the correct media is not available on your printer operator panel, you can download the
media 
profile from the Océ website (see ‘Download a media profile from the Océ web site’  on
page  286
) and upload the media profile to the 'Océ PowerM controller' / 'Océ PowerM Plus
controller 
' (see ‘Upload a media profile’  on page 287).
2. The 
media roll core size of the media you use.
3. The 
'Delivery destination' setting that you defined in the Océ Express WebTools.
To 
set the default 'Delivery destination' select the 'Preferences' - 'Print job defaults' tab.
4. When 
you define print job settings in the printer drivers or the job submission tools, these
values 
always overrule the default values defined in the Océ Express WebTools. Chapter 5
 - Use the printing system158The output delivery
Downloaded From ManualsPrinter.com Manuals 
						

							The output deliveryAttention:
The following table gives an overview of the common output delivery destination. If the
media profile of the media you use requires a specific output delivery, the common delivery
destination will be overruled.
Chapter 5
 - Use the printing system 159The output delivery
Downloaded From ManualsPrinter.com Manuals 
						

							#
Then the printed output
and the default
'Delivery destina-
tion' is
When the
media roll
you use
has a
is delivered at the 'Top Delivery Tray (TDT)''Top Delivery Tray
(TDT)'
3" roll
core
is 
lead through the slot below the 'Top back cover'
at 
the back of the printer. 'External output
(back)'
3" roll
core
Ignored 2" roll
core
Chapter 5
 - Use the printing system160The output delivery
Downloaded From ManualsPrinter.com Manuals