Oce ColorWave 600 User Manual

							Remove a media roll
How to remove a media roll
Attention:
Do not open the media drawer during the print process.
Attention:
Do not open more than one media drawer at the same time to prevent overbalance of
the printer.
Caution:
Watch your fingers when you handle the media roll. #
Illustration
Action Open the media drawer that
contains 

the media roll that you
want to 
remove.
1 Roll back the media manually to
remove the media from the met-
al 
paper guide.
Then, 
use both hands (as indicat-
ed) to lift the roll holder with the
media roll. 2
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 291Remove a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Put the roll holder with the me-
dia roll on the roll loading sta-
tion.
3 Pull the handle of the roll holder
locking mechanism towards you.
4 Remove the roll holder from the
core of the media roll.
5
Remove 
the media roll from the
roll loading station. 6
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system292Remove a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Unpack the media roll
How to unpack a media rollAttention:
Handle the media roll with care. A dented media roll can damage the imaging devices.
Attention:
Please note down the media code (for example LFM090) indicated on the sticker on the
media box. You need this code to select 
the correct media type on the printer operator
panel.
Attention:
Always write the correct media name and media code inside the core, after you unpack
the
 media roll. In that case, 
if you replace a media roll before it is empty and you want
to
 
re-use it later, you will have the correct media information available. #
Illustration
Action Place 
the media box on a table
and open
 it. 1
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 293Unpack the media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Remove the plug from the media
roll.
2 Carefully remove the media roll
from the box.
3
Remove the other plug and
plastic

 around the media roll. 4
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system294Unpack the media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Load a media roll
How to load a media roll
Attention:
Do not use dented media rolls to prevent damage to the imaging devices.
Attention:
Do not open the media drawer during the print process. When the last print is delivered,
wait 
10 seconds before you open the media drawer.
Attention:
Do not open more than one media drawer at the same time to prevent overbalance of
the printer.
Attention:
It is very important to select the media type with the correct media code (for example
LFM090).
 
You can find the media code of the new media roll on the sticker on media
box. The
 media code represents a specific media profile that the Océ ColorWave 600
uses 

to optimize the printed output for the corresponding media type. If the correct media
code is not available on your printer operator panel, you must first make 
a new media
profile available
 on the printer operator panel. (see ‘Make a new media profile available
on the printer

 operator panel’  
on page 161)
Attention:
When you unpack a media roll, always write the correct media name and media code
inside 
the core. In that case, if you replace a media roll before it is empty and you want
to
 
re-use the media roll later, you will have the correct media information available.
Caution:
Watch your fingers when you handle the media roll. Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 295Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							#
Illustration
Action Open the correct media drawer
to load the new media roll.
1 Place 
the new media roll on the
roll loading
 station.
2 Pull the handle of the roll holder
locking mechanism towards you.3
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system296Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Slide the roll holder in the core
of the
 new media roll.
4 Align the roll with the correct
size 
indicator on the roll holder
(At 
the left and right hand side).
Release the handle of the locking
mechanism.
5 Remove the tapes from 
the new
media roll.
 Use both hands (as
indicated) 

to place the media roll
in 
the media drawer. 6
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 297Load a
 media roll
Downloaded From ManualsPrinter.com Manuals 
						

							Illustration
Action Keep the media tight on the roll
and in-line with the side edge.
7 Use both hands to turn the me-
dia 
roll backwards until the me-
dia flap has passed the metal pa-
per guide (1). 8
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system298Load a
 media roll
Downloaded From ManualsPrinter.com Manuals
1  
						

							Illustration
Action Use both hands to slide the me-
dia under the metal paper guide.
A "beep" confirms the correct
paper transport
 (2).
9 Close the media drawer.
Note:
Do not open the 'Media
drawer' during loading.10
Chapter 7
 - Manage media on the Océ ColorWave 600 printing system 299Load a
 media roll
Downloaded From ManualsPrinter.com Manuals
2  
						

							Illustration
Action The following screen appears on
the printer operator panel.Note:
When you load a media
roll the printer automat-
ically detects the roll
width. 
If the detected
roll width
 
is not a stan-
dard width,
 the printer
selects the

 next smaller
roll

 width that 
is sup-
ported by
 the printer. 11
 /
B Chapter 7
 - Manage media on the Océ ColorWave 600 printing system300Load a
 media roll
Downloaded From ManualsPrinter.com Manuals