Panasonic Dmc G7 Owners Manual

							281
10. Playing Back and Editing Images
To allow easy posting to web pages, attachment to e-mail etc., picture size (number of 
pixels) is reduced.
1Select the menu.  (P63)
[Resize]
> [Playback]  > [Resize]  > [Single]/[Multi]
2Select the picture and size.
[Single] setting
1 Press  2/1  to select the picture, and then press 
[MENU/SET].
2 Press  3/4  to select the size, and then press 
[MENU/SET].
•
Confirmation screen is displayed. It is executed when 
[Yes] is selected.
Exit the menu after it is executed.
[Multi] setting
1 Press  3/4  to select the size, and then press 
[MENU/SET].
2 Press  3/4 /2/ 1 to select the picture, and then 
press [MENU/SET] to set (repeat).
•
The setting is canceled when [MENU/SET] is pressed 
again.
3 Press  2 to select [OK], and then press [MENU/SET] 
to execute.
•
Confirmation screen is displayed. It is executed when 
[Yes] is selected.
Exit the menu after it is executed.
MENU
161616
8844
L4:3
M4:3
S4:3
6HW
2. 
						

							10. Playing Back and Editing Images
282
•You can set up to 100 pictures at one time in [Multi].
•The picture quality of the resized picture will deteriorate.
Not available in these cases:
•
This function is not available in the following cases:–Motion pictures–4K burst files
–Pictures taken in Panorama Shot Mode–Group Pictures–Pictures stamped with [Text Stamp]
–Pictures taken with [ ] 
						

							283
10. Playing Back and Editing Images
You can enlarge and then clip the important part of the recorded picture.
1Select the menu. (P63)
2Press 2/1  to select the picture, and then press [MENU/SET].3Use the rear dial and press  3/4 /2/ 1 to select the parts to be cropped.
•
You can also touch [ ]/[ ] to enlarge/reduce.
•You can also move by dragging on the screen.
4Press [MENU/SET].
•Confirmation screen is displayed. It is executed when [Yes] is  selected.
Exit the menu after it is executed.
•The picture quality of the cropped picture will deteriorate.
•Crop one picture at a time when you want to crop the pictures in a picture group.
(You cannot edit all pictures in a group at once.)
•When you crop pictures in a group, the cropped ones are saved s eparately from the original 
ones in the group.
•Information regarding the Face Recognition in the original pict ure will not be copied to images 
having undergone [Cropping].
Not available in these cases:
•
This function is not available in the following cases:
–Motion pictures–4K burst files–Pictures taken in Panorama Shot Mode
–Pictures stamped with [Text Stamp]–Pictures taken with [ ]
[Cropping]
>  [Playback]  > [Cropping]
Rear dial (right): Enlargement
Rear dial (left): Reduction
3 /4 /2 /1 : MoveMENU 
						

							10. Playing Back and Editing Images
284
This mode allows you to automatically display pictures vertically if they were recorded 
holding the camera vertically or rotate pictures manually in 90 o steps.
•
The [Rotate] function is disabled when [Rotate Disp.] is set to  [OFF].
1Select the menu. (P63)
2Press 2/1  to select the picture and then press [MENU/SET].
•The [Rotate] function is disabled for Group Pictures.
3Select the rotation direction.
:
The picture rotates clockwise in steps of 90 o.
:
The picture rotates counter-clockwise in steps of 90o .
•
Exit the menu after it is set.
Select the menu.  (P63)
•
The pictures are displayed without being rotated when you selec t [OFF].
•Exit the menu after it is set.
Not available in these cases:
•
When you play back pictures on a PC, they cannot be displayed i n the rotated direction unless 
the OS or software is compatible with Exif.
Exif is a file format for still pictures which allows recording  information etc. to be added. It was 
established by “JEITA (Japan Electronics and Information Techno logy Industries Association)”.
•[Rotate Disp.] may not work on a screen that plays back multiple pictures, such as the one 
displayed after [Delete Multi] is selected.
[Rotate]/[Rotate Disp.]
[Rotate] (The picture is rotated manually)
> [Playback]  > [Rotate]
[Rotate Disp.] (The picture is automatically rotated and displa yed)
>  [Playback]  > [Rotate Disp.] >  [ON]
MENU
MENU 
						

							285
10. Playing Back and Editing Images
You can do the following if a mark has been added to pictures and they have been set as 
favorites.
•
Play back the pictures set as favorites only as a slide show.•Play back only the pictures set as favorites. ([Favorite Play])
•Delete all the pictures not set as favorites. ([All Delete Except Favorite])
1Select the menu. (P63)
2Select the picture.  (P266)
•Exit the menu after it is set.
∫ Canceling all the [Favorite] settings
Select the menu.  (P63)
•
Confirmation screen is displayed . It is executed when [Yes] is selected.
Exit the menu after it is executed.
•In [Playback Mode], the [Cancel] is disabled.
•You can set up to 999 pictures as favorites.•When you set pictures in a group as [Favorite], the number of y our [Favorite] pictures is 
displayed on the [Favorite] icon of the group’s top picture.
Not available in these cases:
•
This function is not available in the following case:
–Pictures taken with [ ]
[Favorite]
>  [Playback]  > [Favorite]  > [Single]/[Multi]
>  [Playback]  > [Favorite]  > [Cancel]MENU
MENU 
						

							10. Playing Back and Editing Images
286
DPOF “Digital Print Order Format” is a system that allows the user to select which pictures 
to print, how many copies of each picture to print and whether  or not to print the recording 
date on the pictures when using a DPOF compatible photo printer  or photo printing store. 
For details, ask at your photo printing store.
When you set [Print Set] for a group pictures, the print settin g for the number of prints will 
be applied to every picture in the group.
For more information visit:
http://panasonic.jp/dc/dpof_110/white_e.htm
1Select the menu.  (P63)
2Select the picture.  (P266)3Press 3/4  to set the number of prints, and then press [MENU/SET] to set.
•When [Multi] has been selected–Repeat steps 2 and 3 for each picture.
(It is not possible to use the same setting for a multiple numb er of pictures.)
•[999+] is displayed on the screen, if the total number of prints you set for a group pictures 
is more than 1000 pictures.
•Exit the menu after it is set.
∫ Canceling all the [Print Set] settings
Select the menu.  (P63)
•
Confirmation screen is displayed . It is executed when [Yes] is selected.
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel printing with th e recording date by pressing 
1 .
•
Depending on the photo printing store or the printer, the date  may not be printed even if you set 
to print the date. For further information, ask at your photo p rinting store or refer to the 
operating instructions for the printer.
•The date print feature is disabled for pictures that are stamped with text.
[Print Set]
>  [Playback]  > [Print Set]  > [Single]/[Multi]
>  [Playback]  > [Print Set] >  [Cancel]MENU
MENU 
						

							287
10. Playing Back and Editing Images
•The number of prints can be set from 0 to 999.•Depending on the printer, the date print settings of the printer may take precedence so check if 
this is the case.
•It may not be possible to use the print settings with other equ ipment. In this case, cancel all the 
settings, and reset the settings.
•When you set pictures in a group to [Print Set], the number of  pictures added to [Print Set] and 
the total number of pictures to be printed are displayed on the  [Print Set] icon of the group’s top 
picture.
Not available in these cases:
•
This function is not available in the following cases:
–Motion pictures–4K burst files–Pictures taken with [ ]
–File that does not comply with the DCF standard
You can set protection for pictures you do not want to delete b y mistake.
1Select the menu. (P63)
2Select the picture.  (P266)
•Exit the menu after it is set.
∫ Canceling all the [Protect] settings
Select the menu.  (P63)
•
Confirmation screen is displayed . It is executed when [Yes] is selected.
Exit the menu after it is executed.
•The [Protect] feature is only designed to work with this camera .•Even if you protect pictures on a card, they will be deleted if the card is formatted.
•When you set pictures in a group to [Protect], the number of pi ctures with the [Protect] setting is 
displayed on the [Protect] icon of the group’s top picture.
[Protect]
>  [Playback]  > [Protect]  > [Single]/[Multi]
>  [Playback]  > [Protect]  > [Cancel]
Even if you do not protect pictures on a card, they cannot be d eleted when the 
card’s Write-Protect switch is set to [LOCK].MENU
MENU 
						

							10. Playing Back and Editing Images
288
You can clear and replace all information relating to face recognition in selected images.
1Select the menu. (P63)
2Press 2/1  to select the picture and then press [MENU/SET].
3Press  2/1  to select the person and then press [MENU/SET].4(When [REPLACE] is selected)
Press  3/4 /2 /1  to select the person to replace and then press [MENU/SET].
•
Confirmation screen is displayed. It is executed when [Yes] is  selected.
Exit the menu after it is executed.
•Cleared information regarding the [Face Recog.] cannot be resto red.
•When all Face Recognition information in a picture has been can celed, the picture will not be 
categorized using Face Recognition in [Category Play].
•The Face Recognition information of pictures in a group has to be edited at once.
(You cannot edit one picture at a time.)
•Editing of group pictures can be performed only on the first picture of each set.
You can set the order in which the camera displays images during playback.1Select the menu.  (P63)
2Press 3/4  to select an item and then press [MENU/SET].
•
Exit the menu after it is set.
•When you insert another card, images may not be displayed by [D ATE/TIME] first. The images 
will be displayed by [DATE/TIME] if you wait for a while.
[Face Rec Edit]
>  [Playback]  > [Face Rec Edit]  > [REPLACE]/[DELETE]
[Picture Sort]
> [Playback]  > [Picture Sort]
[FILE NAME] Displays images by folder name/file name. This display format allows 
you to locate images in the card easily.
[DATE/TIME]Displays images by recording date. If the card contains picture
s taken 
with more than one camera, this display format is convenient fo r 
looking for images.
MENU
MENU 
						

							289
10. Playing Back and Editing Images
This sets which option, [Yes] or [No], will be highlighted first 
when the confirmation screen for deleting a picture is 
displayed.
It is set to [“No” first] at the time of purchase.
1Select the menu.  (P63)
2Press 3/4  to select an item and then press [MENU/SET].
•
Exit the menu after it is set.
[Delete Confirmation]
>  [Playback]  > [Delete Confirmation]
[“Yes” first] [Yes] is highlighted first, so deletion can be done quickly.
[“No” first][No] is highlighted first. Accidental deletion of pictures is a voided.
NoYe s
MENU 
						

							290
11.  Using the Wi-Fi function
What you can do with the Wi-Fi
R function
This owner’s manual refer to both smartphones and tablets as “s martphones” from this 
point on unless noted otherwise.
Controlling with a Smartphone/Tablet  (P294)
Recording with a smartphone  (P300)Playing back pictures in the camera  (P301)
Saving images stored in the camera  (P301)
Sending images to an SNS (P302)
Writing location information on images 
stored in the camera (P302)
Combining motion pictures recorded with Snap Movie according to  
your preference on a smartphone  (P304)
Easy connection
You can easily set up a direct connection to your 
smartphone without entering a password.
Displaying pictures on a TV  (P308)
Printing Wirelessly  (P309)
When sending images to AV device  (P310)
You can send pictures and motion pictures to AV devices in your  house 
(home AV devices).
When sending images to PC  (P312)
Using Web services  (P316)
You can send pictures and motion pictures to an SNS, etc. via “ LUMIX CLUB”.By using [Cloud Sync. Service], you can receive pictures and mo tion pictures 
on a PC or smartphone.