Panasonic Projector PT-RZ475U User Manual

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 91
Setting the audio output during standby
1) Press as to select [AUDIO SETTING].
2)  
Press the  button.
 f The  [AUDIO SETTING]  screen is displayed.
3) Press as to select [IN STANDBY MODE].
4)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Turns off audio output during standby.
[ON] Turns on audio output during standby.
Note
 fWhen [STANDBY MODE] ( x   page   80) in the [PROJECTOR SETUP] menu → [ECO...

Chapter 4 Settings — [PROJECTOR SETUP] menu
92 - ENGLISH
[STATUS]
Display the status of the projector.
1) Press as to select [STATUS].
2)  
Press the  button.
 f The  [STATUS] screen is displayed.
3) Press  qw to switch the pages.
 fThe page will change each time you press the button.
[INPUT] Displays the input terminal currently selected.
[SIGNAL NAME] Displays the input signal name.
[SIGNAL FREQUENCY] Displays the frequency of the input signal.
[PROJECTOR RUNTIME] Displays the operation times of the...

Chapter 4 Settings — [PROJECTOR SETUP] menu
ENGLISH - 93
Setting the date and time automatically
1) Press as to select [DATE AND TIME].
2)  
Press the  button.
 f The  [DATE AND TIME] screen is displayed.
3) Press  as to select [ADJUST CLOCK].
4)  
Press the  button.
 f The  [ADJUST CLOCK] screen is displayed.
5) Press  as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
 fThe items will switch each time you press the button.
[OFF] Disables [NTP SYNCHRONIZATION].
[ON] Enables...

Chapter 4 Settings — [PROJECTOR SETUP] menu
94 - ENGLISH
[INITIALIZE]
Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE].
2)  
Press the  button.
 f The  [SECURITY PASSWORD] screen is displayed.
3) Enter a security password and press the  button.
 fThe  [INITIALIZE]  screen is displayed.
4) Press as to select an item to initialize.
[ALL USER DATA] Returns all setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and 
[USER LOGO] to...

Chapter 4 Settings — [TEST PATTERN] menu
ENGLISH - 95
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to “Navigating through the menu” (x
  page   46) for the operation of the menu screen.
 fPress 

qw to switch.
[TEST PATTERN]
Display the test pattern built-in to the projector.
Settings of position, size, and other factors will not be reflected in test patterns. Make sure to display the input signal before performing various 
adjustments.
1) Press  qw to switch...

Chapter 4 Settings — [SECURITY] menu
96 - ENGLISH
[SECURITY] menu
On the menu screen, select [SECURITY] from the main menu, and select an \
item from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   46) for the operation of the menu screen.
 fWhen the projector is used for the first time
Initial password: Press  awsqawsq in order

, and press the  button.
 fAfter selecting the item, press 

asqw to set.
Attention
 fWhen you select the [SECURITY] menu and press the  button, entering a...

Chapter 4 Settings — [SECURITY] menu
ENGLISH - 97
[TEXT DISPLAY]
Overlap the security message (text) over the projected image.
1) Press as to select [TEXT DISPLAY].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you press the button.
[OFF] Hides the security message.
[ON] Displays the security message.
Note
 fIf a closed caption signal of the selected mode is input, the security m\
essage is not displayed.
[TEXT CHANGE]
Change the text displayed when [TEXT DISPLAY] is set to [ON]....

Chapter 4 Settings — [SECURITY] menu
98 - ENGLISH
[CONTROL DEVICE SETUP]
Enable/disable the button operations on the control panel and the remote\
 control.
1) Press as to select [CONTROL DEVICE SETUP].
2)  
Press the  button.
 f The  [CONTROL DEVICE SETUP] screen is displayed.
3) Press  as to select [CONTROL PANEL] or [REMOTE CONTROL].
[CONTROL PANEL] Sets the limitation on the control from the control panel.
[REMOTE CONTROL] Sets the limitation on the control from the remote control.
4) Press the...

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 99
[NETWORK] menu
On the menu screen, select [NETWORK] from the main menu, and select an i\
tem from the sub-
menu.
Refer to “Navigating through the menu” (x
  page   46) for the operation of the menu screen.
 fAfter selecting the item, press 

asqw to set.
[DIGITAL LINK MODE]
Switch the communication method of the  terminal of the projector.
1) Press  as to select [DIGITAL LINK MODE].
2)  
Press 
 qw to switch the item.
 fThe items will switch each time you...

Chapter 4 Settings — [NETWORK] menu
100 - ENGLISH
Note
 fThe projector does not support 10BaseT  Full/Half.
When the projector is connected to a twisted-pair-cable transmitter
1) Press as to select [DIGITAL LINK SETUP].
2)  
Press the  button.
 f The  [DIGITAL LINK SETUP] screen is displayed.
3) Press  as to select [DUPLEX(DIGITAL LINK)].
4)  
Press 
 qw to switch the communication method.
 fThe items will switch each time you press the button.
[100BaseTX-Full] Full duplex communication method is set....