Home > Xerox > All in One Printer > Xerox 8700x Manual

Xerox 8700x Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Xerox 8700x Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 228 Xerox manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Specifications 
      ColorQube 8700/8900 Color Multifunction Printer  231 
      User Guide 
     
    Clearance Requirements  
    Standard Configurations  
     
    Configuration with Finisher, 1800 -Sheet High-Capacity Feeder, and Two Optional 
    525-Sheet Feeders  
      
    						
    							Specifications 
    232  ColorQube 8700/8900  Color Multifunction Printer  
      User Guide  
     
    Environmental Specifications  
    Temperature 
    10–32°C (50–90°F)  
    Relative Humidity  
    Operating: 15% to 85% (non -condensing)  
    Elevation  
    For optimum performance, use the printer at elevations below 3200  m (10,500  ft.).   
    						
    							Specifications 
      ColorQube 8700/8900 Color Multifunction Printer  233 
      User Guide 
     
    Electrical Specifications  
    Power Supply Voltage Frequency  
    Current Required  
    90–140 VAC   47–63 Hz   12 A 
    180– 264 VAC   47–63 Hz   6 A  
    ENERGY STAR Qualified Product  
     
     
     
     
     
    The ColorQube 8700 Color Multifunction Printer and ColorQube 8900 Color 
    Multifunction Printer are ENERGY
     STAR® qualified under the ENERGY STAR  Program 
    Requirements for Imaging Equipment.  
    The  E
    NERGY STAR and  ENERGY STAR mark are registered United States trademarks.  
    The ENERGY STAR  Imaging Equipment Program is a team effort between United 
    States, European Union, and Japanese governments and the office equipment industry 
    to promote energy -efficient copiers, printers, fax, multifunct ion printers, personal 
    computers, and monitors. Reducing product energy consumption helps combat smog, 
    acid rain, and long -term changes to the climate by decreasing the emissions that result 
    from generating electricity.  
    Xerox® ENERGY STAR  equipment is preset at the factory to switch to Energy Saver Mode 1 after two 
    minutes, and to Energy Saver Mode 2 after thirty minutes from the last copy or print. For details, see 
    Setting Energy Saver Mode  on page  35.  
    						
    							Specifications  
    234  ColorQube 8700/8900  Color Multifunction Printer  
      User Guide  
     
    Performance Specifications  
    Printing Resolution 
    Maximum Resolution: 2400 FinePoint™  
    Print Speed 
     
    Print Mode  Print Speed in ppm (1 -sided / 2 -sided)  
    Fast Color   44/31 
    Standard  30/25 
    Enhanced  19/18 
    High Resolution/Photo  6/6 
    PCL 400 x 600 Mode   20/18 
    PCL 600 x 600 Mode  11/11  
      
    						
    							 
     ColorQube 8700/8900 Color Multifunction Printer  235 
      User Guide 
     
    Thi s appendix includes:  
    •   Basic Regulations  ................................ ........................................................................................................................... 2 36  
    •   Regulatory Information for 2.4 GHz Wireless Network Adapter .................................................................. 240  
    •   Copy Regulations  ................................ ........................................................................................................................... 241  
    •   Fax Regulations  ................................ .............................................................................................................................. 244  
    • Material Safety Data Sheets ................................ ..................................................................................................... 248  
     B Regulatory Information   
    						
    							Regulatory Information 
    236  ColorQube 8700/8900  Color Multifunction Printer  
      User Guide  
     
    Basic Regulations  
    Xerox has tested this printer to electromagnetic emission and immunity standards. These standards are 
    designed to mitigate interference caused or received by this printer in a typical office environment.  
    United States FCC Regulations 
    This equipment has been tested and found to comply with the limits for a Class A  digital device, 
    pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against 
    harmful interference when the equipment is operated in a commercial environment. This equipment 
    generates, uses, and can radiate radio  frequency energy. If it is not installed and used in accordance with 
    these instructions, it may cause harmful interference to radio communications. Operation of this 
    equipment in a residential area is likely to cause harmful interference in which case the  user will be 
    required to correct the interference at his/her own expense.  
    If this equipment does cause harmful interference to radio or television reception, which can be 
    determined by turning the equipment off and on, the user is encouraged to try to cor rect the 
    interference by one or more of the following measures:  
    •   Reorient or relocate the receiving antenna.  
    •   Increase the separation between the equipment and receiver.  
    •   Connect the equipment into an outlet on a circuit different from that to which the recei ver is 
    connected.  
    •   Consult the dealer or an experienced radio/TV technician for help.  
    Changes or modifications to this equipment not approved by Xerox can void the authority of the user to 
    operate this equipment.  
     
    Note: To ensure compliance with Part 15 of the FCC rules, use shielded interface cables.  
     
    Canada 
    This Class A digital apparatus complies with Canadian ICES -003.  
    Cet appareil numérique de la classe A est conforme à la norme NMB -003 du Canada.   
    						
    							Regulatory Information 
      ColorQube 8700/8900 Color Multifunction Printer  237 
      User Guide 
     
    European Union Radio Interference  
     
     CAUTION: 
    This is a Class A product. In a domestic environment, this product can cause radio 
    interference in which case the user could be required to take adequate measures.  
     
     
     The CE mark applied to this product symbolizes a declaration of conformity by Xerox with 
    the following applicable Directives of the Eur
    opean Union as of the dates indicated: 
    •   December 12, 2006: Low Voltage Directive 2006/95/EC  
    •   December 15, 2004: Electromagnetic Compatibility Directive 2004/108/EC  
    • March 9, 1999: Radio Equipment & Telecommunications Terminal Equipment Directive 
    1999/5/EC  
    This printer, if used properly in accordance with the instructions, is not dangerous for the consumer or for 
    the environment.  
    To ensure compliance with European Union regulations, use shielded interface cables.  
    A signed copy of the Declaration of Conformity for this printer can be obtained from Xerox.  
    European Union Lot 4 Imaging Equipment Agreement Environmental 
    Information 
    Environmental Information Providing Environmental Solutions and Reducing Cost  
    Introduction 
    The following information has been developed to assist users and has been issued in relation to the 
    European Union (EU) Energy Related Products Directive, specifically the Lot 4 study on Imaging 
    Equipment. This requires manufacturers to improve environmental performance of in scope products 
    and supports the EU action plan on energy efficiency.  
    In scope products are Household and Office equipment that meet the following criteria.  
    •   Standard monochrome format products with a maximum speed less than 66 A4 images per minute  
    •   Standard color format products  with a maximum speed less than 51 A4 images per minute  
    Environmental Benefits of Duplex Printing 
    Most Xerox products have duplex printing, also known as 2 -sided printing, capability. This enables you to 
    print on both sides of the paper automatically, and therefore helps to reduce the use of valuable 
    resources by reducing your paper consumption. The Lot 4 Imaging Equipment agreement requires that 
    on models greater than or equal to 40 ppm color or greater than or equal to 45 ppm monochrome the 
    duplex function  has been auto enabled, during the setup and driver installation. Some Xerox models 
    below these speed bands may also be enabled with 2 -sided printing settings defaulted on at the time of 
    install. Continuing to use the duplex function will reduce the enviro nmental impact of your work. 
    However, should you require simplex/1 -sided printing, you may change the print settings in the print 
    driver.   
    						
    							Regulatory Information 
    238  ColorQube 8700/8900  Color Multifunction Printer  
      User Guide  
     
    Paper Types  
    This product can be used to print on both recycled and virgin paper, approved to an environmental 
    stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper 
    (60 g/m²), which contains less raw material and thus save resources per print, may be used in certain 
    applications. We encourage you to check if this is suitable fo r your printing needs. 
    ENERGY STAR 
    The ENERGY STAR  program is a voluntary scheme to promote the development and purchase of energy 
    efficient models, which help to reduce environmental impact. Details on the ENERGY
     STAR  program and 
    models qualified to ENERGY
     STAR  can be found at the following website: 
    www.energ ystar.gov/index.cfm?fuseaction=find_a_product.showProductGroup&pgw_code=IEQ  
    Power Consumption and Activation Time 
    The amount of electricity a product consumes depends on the way the device is used. This product is 
    designed and configured to enable you to reduce your electricity costs. After the last print it switches to 
    Ready Mode. In this mode it can print again immediately if required. If the product is not used for a 
    period of time, the device switches to a Power Saver Mode. In these modes, only essentia l functions 
    remain active in order to enable reduced product power consumption.  
    Upon exiting from Power Saver Mode, the first print will take slightly longer than in Ready Mode. This 
    delay is the result of the system "waking up" from Power Saver mode and i s typical of most imaging 
    products on the market.  
    If you wish to set a longer Activation Time or would like to completely deactivate the Power Save Mode, 
    please consider that this device may then only switch to a lower energy level after a longer period of  
    time or not at all.  
    To learn more about Xerox participation in sustainability initiatives, please visit our website at: 
    www.xerox.com /about-xerox/environment/enus.html  
    Germany 
    Blendschutz  
    Das Gerät ist nicht für die Benutzung im unmittelbaren Gesichtsfeld am Bildschirmarbeitsplatz 
    vorgesehen. Um störende Reflexionen am Bildschirmarbeitsplatz zu vermeiden, darf dieses Produkt nicht 
    im unmittelbaren Gesichtsfeld platziert werden.  
    Lärmemission 
    Maschinenlärminformations -Verordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB(A) oder 
    weniger gemäß EN ISO 7779.  
    Importeur 
    Xerox GmbH  
    Hellersbergstraße 2 -4  
    41460 Neuss  
    Deutschland   
    						
    							Regulatory Information 
      ColorQube 8700/8900 Color Multifunction Printer  239 
      User Guide 
     
    Turkey RoHS Regulation 
    In compliance with Article 7 (d), we hereby certify “it is in compliance with the EEE  regulation.”  
    “EEE yönetmeliğine uygundur.”   
    						
    							Regulatory Information 
    240  ColorQube 8700/8900  Color Multifunction Printer  
      User Guide  
     
    Regulatory Information for 2.4 GHz Wireless 
    Network Adapter  
    This product contains a 2.4 GHz Wireless LAN radio transmitter module which complies with the 
    requirements specified in FCC Part 15, Industry Canada RSS -210 and European Council Directive 
    99/5/EC.  
    Operation of this device is subject to the following two conditions: (1) this device may not cause harmful 
    int erference, and (2) this device must accept any interference received, including interference that may 
    cause undesired operation. 
    Changes or modifications to this device not specifically approved by the Xerox Corporation may void the 
    user's authority to ope rate this equipment.  
    						
    All Xerox manuals Comments (0)

    Related Manuals for Xerox 8700x Manual