Canon printer PIXMA MG5720 User Manual

							Main Components
Front View
Rear View
Inside View
Operation Panel
221 
						

							Front View
(1) operation panelUse to change the settings of the machine or to operate it. Also, lift and open it to replace an ink tank, to
check the ink lamp, or to remove jammed paper inside the machine.
Operation Panel
(2) document cover Open to load an original on the platen glass.
(3) paper guides Align with both sides of the paper stack.
(4) cassette Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
Loading Envelopes
(5) front cover Open and pull out to load paper. Also, open when printing.
(6) paper support Extend to load paper in the cassette.
(7) output tray extension Open to support ejected paper.
(8) paper output support Extend to support ejected paper.
(9) paper output tray Printed paper is ejected. Open it before printing.
222 
						

							(10) platen glassLoad an original here.
223 
						

							Rear View
(1) transport unitOpen when removing jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) USB port Plug in the USB cable to connect the machine with a computer.
Important

						

							Inside View
(1) ink lampsLights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(2) print head holder The print head is pre-installed.
Note

						

							Operation Panel* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
(1) ON button/POWER lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on thepower, make sure that the document cover is closed.
Turning the Machine On and Off
(2) HOME button Used to display the HOME screen.
LCD and Operation Panel
(3) LCD (Liquid Crystal Display) Displays messages, menu items, and the operational status.
(4) Black button Starts black & white copying, scanning, etc.
(5) Color button Starts color copying, scanning, etc.
(6) Stop button Cancels operation when print, copy, or scan job is in progress.
(7) Alarm lamp Lights or flashes when an error occurs.
(8) 
, , , and  buttons
Used to select a menu or setting item.
LCD and Operation Panel
(9) OK button Finalizes the selection of a menu or setting item. This button is also used to resolve an error.
(10) Back button Returns the LCD to the previous screen.
(11) Function buttons Used to select menus on the HOME screen or select a function menu displayed at the bottom of the
LCD.
Using the Function Buttons
226 
						

							Power Supply
Confirming that the Power Is On
Turning the Machine On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
227 
						

							Confirming that the Power Is OnThe  POWER  lamp is lit when the machine is turned on.
Even if the LCD is off, if the  POWER lamp is lit, the machine is on.
Note

						

							Turning the Machine On and OffTurning on the machine1.
Press the  ON button to turn on the machine.
The  POWER  lamp flashes and then remains lit.
Confirming that the Power Is On
Note

						

							Important