Canon printer PIXMA MG5720 User Manual

							Wireless LAN securityInactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXX (12 characters)IPv4 subnet maskXXX. XXX. XXX. XXX (12 characters)IPv4 default gatewayXXX. XXX. XXX. XXX (12 characters)IPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)IPv6 subnet prefix lengthXXX (up to 3 digits)IPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC addressXX:XX:XX:XX:XX:XX (12 characters)IPsec settingsEnable (ESP)/Enable (ESP & AH)/Enable (AH)/DisablePre-shared keyXXXXXXXXXXXXXXXX (16 characters)Printer nameXXXXXXXXXXXXXXX (up to 15 characters)Bonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)


						

							IPv6 subnet prefix lengthXXX (up to 3 digits)IPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC addressXX:XX:XX:XX:XX:XX (12 characters)IPsec settingsDisablePre-shared keyXXXXXXXXXXXXXXXX (16 characters)Printer nameXXXXXXXXXXXXXXX (up to 15 characters)Bonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)Direct connection device nameXXXXXX-XXXXXXseries
("XX" represents alphanumeric characters.)


						

							Note
						

							Using Machine with Direct Connection
254 
						

							Device user settings
						

							PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on PictBridge (Wireless LAN) Compliant Device
1.
Page size
Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper size to Default  on
the PictBridge (Wireless LAN) compliant device.
2.
Type  (Media type)
Select the media type when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper type to Default  on
the PictBridge (Wireless LAN) compliant device.
3.
Print qlty  (Print quality)
Select the print quality when printing directly from a PictBridge (Wireless LAN) compliant device.
4.
Border  (Bordered/Borderless print)
Select the bordered/borderless layout.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Layout to Default  on the
PictBridge (Wireless LAN) compliant device.
5.
Photo fix
When  Auto photo fix  is selected, the scene or person's face of a shot photo is recognized and the most
suitable correction for each photo is made automatically. It makes a darkened face by backlight brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects each scene
with the most suitable color, brightness, or contrasts automatically to print.
Note

						

							Language selectionChanges the language for messages and menus on the LCD.
258 
						

							Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note

						

							Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine frommisprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Settings