Canon printer PIXMA MG5720 User Manual

							Reset settingYou can set the settings back to the default.
						

							ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn on/off the
machine automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure machine is turned on.
2.
Select   ECO settings  on HOME screen.
LCD and Operation Panel
3.
Select  Two-sided printing setting  and press OK button.
4.
Use  button to change setting item, use  button to change setting, and then use
OK  button to confirm selection.
1.
Copy
Sets two-sided copying as a default.
2.
Template print
Sets two-sided printing of template forms on the machine as a default.
Note

						

							2.
Select  ECO settings  on HOME screen.
LCD and Operation Panel
3.
Select  Energy saving settings  and press OK button.
4.
Use  button to change setting item, use  button to change setting, and then use
OK  button to confirm selection.
1.
Auto power off
Specifies the length of time to turn the machine off automatically when no operation is made or no printing data is sent to the machine.
2.
Auto power on
Selecting  ON enables the machine to turn on automatically when a scanning command from a
computer or printing data is sent to the machine.
263 
						

							Quiet settingEnables this function on the machine if you want to reduce the operating noise, such as when printing at
night.
Follow the procedure below to perform setting.1.
Make sure machine is turned on.
2.
Select   Quiet setting  on HOME screen.
LCD and Operation Panel
3.
Use  button to select  Use quiet mode  and press OK button.
The confirmation screen is displayed and the 
 icon appears as the  Quiet setting menu icon.
Activate this setting to reduce the operating noise while printing is in progress.
Important

						

							Network Connection
Network Connection Tips
265 
						

							Network Connection Tips
Default Network Settings
Cannot Proceed beyond Printer Connection Screen/Connect Cable Screen
Another Printer Found with Same Name
Connecting to Another Computer via LAN/Changing from USB to LAN
Connection
Printing Network Settings
266 
						

							Default Network SettingsLAN Connection DefaultsItemDefaultChange LANDisable LANSSIDBJNPSETUPCommunication modeInfrastructureWireless LAN securityDisableIP address  (IPv4 )Auto setupIP address  (IPv6 )Auto setupSet printer name *XXXXXXXXXXXXEnable/disable IPv6EnableEnable/disable WSDEnableTimeout setting1 minuteEnable/disable BonjourEnableService nameCanon MG5700 seriesLPR protocol settingEnablePictBridge communicationEnable
("XX" represents alphanumeric characters.)
* Default value depends on machine. To check value, use operation panel.
LAN settings
Direct Connection Defaults
ItemDefaultSSID  (Identifier for direct connection)DIRECT-xxXX-MG5700series *1PasswordYYYYYYYYYY *2Wireless LAN securityWPA2-PSK (AES)Direct connection device nameZZZZZZ-MG5700series *3Connection request confirmationDisplayed
*1 "xx" represents alphanumeric characters. "XX" represents last two digits of machine's MAC address.
*2 The password is specified automatically.
*3 "ZZZZZZ" represents last six digits of machine's MAC address.
267 
						

							Another Printer Found with Same NameWhen the printer is found during setup, other printers with the same name may appear on the resultsscreen.
Select a printer with checking the printer settings against those on detection result screen.
						

							Connecting to Another Computer via LAN/Changing from USB toLAN Connection
For Windows:
For Mac OS:
For Windows:To add a computer to connect to the machine on a LAN or to change from USB to LAN connection,
perform setup using the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
To connect an additional computer to the machine via LAN, or to change from USB to LAN connection,
follow the instructions on the Canon website.
269 
						

							Printing Network SettingsUse the operation panel to print the machine's current network settings.
Important