Canon printer PIXMA MG5720 User Manual

							7.Make sure card slot is mounted.
When the card slot is mounted, the following icon appears on  Computer (or My Computer ).
Restrictions on Card Slot Use over Network

						

							When Printer Driver Is Not Associated with PortIf  No Driver  is displayed for the printer's name on the  Canon IJ Network Tool screen, the printer driver is
not associated with a created port.
To associate a port with a printer driver, follow the procedure below.1.
Start up IJ Network Tool.
2.
Select printer displayed as  No Driver on Name .
3.
Select  Associate Port...  on Settings  menu.
The  Associate Port  screen is displayed.
4.
Select printer to associate with port.
The list of the printers that the printer driver is installed is displayed at  Printer: on the Associate Port
screen. Select a printer to associate with a created port.
5.
Click  OK.
332 
						

							Technical TermsIn this section, technical terms used in the manual are explained.
A
B
C
D
F
I
K
L
M
O
P
R
S
T
U
W
A

						

							When using WEP as an encryption method, the authentication method is able to fix to Open System
or  Shared Key .
For WPA/WPA2, authentication method is PSK.

						

							F
						

							S
						

							PIN entry: a mandatory method of setup for all WPS certified devicesPush button configuration (PBC): an actual push button on the hardware or through a simulated push button in the software.
339 
						

							RestrictionsIf you use a printer over the wireless LAN, the printer may recognize nearby wireless systems, you should
set a network key (WEP or WPA/WPA2) to the wireless router to encrypt wireless transmission. Wireless
communication with a product that does not comply with the Wi-Fi standard cannot be guaranteed.
Connecting with too many computers may affect the printer performance, such as printing speed.
340