GE Vivid 7 User Manual

							Peripherals
Vivid7/Vivid7 PRO Users Manual387
FC092326-03
7. Press SELECT.
The VCR spools the tape and stops at the given counter 
value.
Additional playback features
When playing back an examination, part of it can be stored on 
the computer’s memory as a cineloop. The cineloop enables 
the user to perform further operations on the stored section 
(see page 62 for further information on cineloop operation).
To store a recorded sequence as a cineloop
1. Press 
FREEZE while playing back a recorded session.
The last few seconds are stored as a cineloop.
Refer to ’Cineloop operation’ on page 62 for further details on 
working with cineloops. 
						

							Peripherals
388Vivid7/Vivid7 PRO Users Manual
FC092326-03
Printing
The Vivid 7/Vivid 7 PRO ultrasound unit can support a color 
and a black & white thermal video printer. The printer devices 
are controlled from the 
PRINT keys on the control panel (see 
Figure 11-5).
The 
PRINT keys can also be configured to perform alternative 
storage (i.e. storage to DICOM media or secondary capture). 
See page 432 for configuration of the 
PRINT keys.
 Figure 11-5: The printer The printer controls on the Control panel
To print an image
For details on the 
Thermal video 
printers operation, 
consult the manu-
facturer operator 
manual provided 
with the printer.1. Press PRINT or ALT. on the Control panel (see Figure 11-5).
The image displayed on the screen is printed on B&W or 
Color printer, depending on the key assignment 
configuration (see page 432).
1. Alt. Print
2. Print 
						

							Peripherals
Vivid7/Vivid7 PRO Users Manual389
FC092326-03
Specifications for peripherals
Please refer to the documentation accompanying the 
peripherals. 
						

							Peripherals
390Vivid7/Vivid7 PRO Users Manual
FC092326-03 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual391
FC092326-03
Chapter 12 
Presets and System setup
This chapter includes the following information:
• Introduction  ................................................................................... ..  392
• Starting the Configuration package  ............................................ ..  395
• To open the Configuration package  ......................................... 395
• Overview  ........................................................................................ ..  396
• Imaging  .......................................................................................... ..  397
• The Global setup sheet  ............................................................ 397
• Application ................................................................................ 400
• Application menu ...................................................................... 404
• Measure  ......................................................................................... ..  406
• Configuration of the Measurement menu  ................................. 409
• Report  ............................................................................................ ..  414
• The Report templates sheet  ..................................................... 415
• The diagnostic codes sheet  ..................................................... 418
• The Comment texts sheet  ........................................................ 420
• Connectivity  .................................................................................. ..  423
• Dataflow  ................................................................................... 424
• Additional outputs ..................................................................... 432
• Formats  .................................................................................... 437
• TCP/IP ...................................................................................... 442
• System  ........................................................................................... ..  443
• The system settings  ................................................................. 443
• About .............................................................................................. ..  447
• Administration ............................................................................... ..  448
• Users  ........................................................................................ 449
• Logon  ....................................................................................... 452 
						

							Presets and System setup
392Vivid7/Vivid7 PRO Users Manual
FC092326-03
Introduction
This chapter describes the configuration management package 
of the Vivid 7/Vivid 7 PRO ultrasound unit. The Vivid 7/
Vivid 7 PRO configuration package enables users to customize 
the global configuration for the unit and the application-specific 
settings.
In addition, users with administration rights have access to the 
local archive backup function, local archive restore function and 
creation of users.
The configuration management package consists of a Setup 
dialogue window divided in different setup categories with 
sublevels.
The table below summarizes the contents and access rights of 
the different categories and sublevels of the Vivid 7/
Vivid 7 PRO configuration package:
Category and sublevel Description access Refer to
Imagingpage 397
•  Global Sets the cineloop controls and 
display.
Sets the patient information 
display.
Sets the scan information 
displayed on the video record.All
•  Application Configures the probe and 
application specific settings. All
•  Application menu Configures the Application 
menu.All
MeasureConfigures the Measurement 
menu by selecting and defining 
the sequence of the 
measurements and calculation 
to perform. The selected 
measurements and calculation 
are displayed in the worksheet.All page 406
Reportpage 414 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual393
FC092326-03
• Templates • Configures the Report 
templates menu by selecting 
and ordering the templates to 
show in the menu.All
•  Diagnostic  codes Create or delete pre-defined text 
input for the referral reasons and 
diagnosis.All
•  Comment  texts Create or delete pre-defined text 
input for the comments.All
Connectivitypage 423
•  Dataflow Create new dataflows or 
configure existing dataflows.Admin
•  Additional outputs Configure the 
PRINT and ALT 
keys.Admin
•  Tools Formats and verifies removable 
media.All
• Formats Configures the Examination list 
window display and other 
options related to the patient 
management.All
•  TCPIP Sets the Transmission Protocol/
Internet Protocol.Admin
Systempage 443
•  Settings Sets the date and time format, 
language and units.Admin
•  Test Enables testing of the different 
parts of the unit.Admin
AboutDisplays information about the 
software, hardware and probes.All page 447
Administrationpage 448
•  Backup Local archive and system 
configuration backup.Admin Category and sublevel Description access Refer to 
						

							Presets and System setup
394Vivid7/Vivid7 PRO Users Manual
FC092326-03
•  Restore Restore local archive and 
system configuration from a 
backup.Admin
•  Users Operator and referring staff 
registration, operators rights 
settings.Admin
ServiceThis sheet is for service staff 
only. Deals with video selection, 
LCD light setting, printer 
definition and keyboard 
configuration.Admin Category and sublevel Description access Refer to 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual395
FC092326-03
Star ting the Configuration package
To access the Configuration package the user has to log on as 
a specific user (see page 449). This ensures user-specific and 
user-defined settings and presets to be used.
The access to the entire configuration package is user 
configuration dependent (see page 449).
To open the Configuration package
1. Press CONFIG on the alphanumeric keyboard.
The Log In window is displayed asking for operator ID and 
password (see Figure 12-1).
2. Select Log on when completed.
The Setup dialogue window is displayed (see Figure 12-2).
 Figure 12-1: The Operator login window
1. Select the operator
2. Type password 
						

							Presets and System setup
396Vivid7/Vivid7 PRO Users Manual
FC092326-03
Over view
The configuration management package consists of a Setup 
dialogue window divided in different setup categories with 
sublevels (sheets labelled with tab).
The functionality of each configuration category and associated 
sublevels are described on the following pages.
 Figure 12-2: The Setup dialogue window structure
1. Sublevel tabs for the 
selected Setup 
category.
2. Setup categories
3. Selected Setup 
category