GE Vivid 7 User Manual

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual397
FC092326-03
Imaging
• Global: enables the user to configure display-related 
settings.
• Application: enables configuration of the probe and 
application specific settings.
• Application menu: enables configuration of the 
Measurement menu.
The Global setup sheet
 Figure 12-3: The Global setup sheet 
						

							Presets and System setup
398Vivid7/Vivid7 PRO Users Manual
FC092326-03
Cineloop store
Crop images
Doppler
Parameter Description
Cineloop store:
• Time before/after heart cycle: sets the total 
storage time span of the cineloop in ECG 
mode.
• Time span (no ECG): sets the total storage 
time span of the cineloop with no ECG.
• Preview loop before store: when selected 
enable review of cineloops before storage.
Parameter Description
Crop images:
: In the Analysis screen, removes top and 
bottom of the image when more than two 
images have been selected.
Parameter Description
Doppler:
• Show KHz scale: when selected, displays 
the KHz scale on the left side of the Doppler 
spectrum (see page 112). 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual399
FC092326-03
Patient Info
Scan Info
Parameter Description
Patient Info:
• Title bar Line 1 & 2: selects from the 
pop-up menu the patient information 
to display on the scanning screens 
Title bar (see page 52).
• Anonymous patient: when checked, 
no patient information is displayed on 
the scanning screens Title bar.
Parameter Description
Scan Info:
•  : displays scan information on the 
video record. 
						

							Presets and System setup
400Vivid7/Vivid7 PRO Users Manual
FC092326-03
Application
The Application category enables the configuration of probe/
application specific settings (presets). The application-specific 
settings can be stored and used as default presets with this 
probe.
 Figure 12-4: The Application setup sheet (example) 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual401
FC092326-03
The Probe/application configuration parame-
ters
Parameter Description
Image Store settings:
•  Single frame (live store):
: Store cineloop.
: Store single frame image only.
•  Number of heart cycles:
Select the number of heart cycles to 
store (Single frame must be 
unchecked).
Auto freeze:
• Freeze 2D image in Doppler: the last 
2D or color flow image is displayed 
when entering in Doppler mode.
• Auto freeze after: sets the time after 
which the system enters in freeze when 
not in use.
Footswitch functionality:
Configures the footswitch pedal for the 
selected application.
Select the operation to perform for each 
pedal from the associated Pedal pop-up 
menu.
Templates and Packages:
Defines the default stress protocol 
associated to the application.
Select the default Protocol to be 
associated to the selected application 
from the pop-up menu.
Auto invert on steer:
In Color flow, the color bar is inverted 
when steering the color flow sector angle. 
						

							Presets and System setup
402Vivid7/Vivid7 PRO Users Manual
FC092326-03
Create a new Application
The application created is probe dependant. Select the desired 
probe before configuring a new application.
1. Press 
APPLICATION on the Control panel.
2. Trackball to Preset... in the Application pop-up menu.
The Application setup sheet (see Figure 12-4) is displayed.
3.Adjust the parameters as desired (see page 401).
4. Press New.
A Dialogue window is displayed.
5.Enter a name for the new application.
6. Press OK
To edit an application
1. Press APPLICATION and select the application to edit.
2. Press 
APPLICATION again.
3. Trackball to Preset... in the Application pop-up menu.
The Application setup sheet (see Figure 12-4) is displayed.
4. Change the parameters as desired (see page 401).
5. Press Save to store the changes.
Applicable only on user-defined applications.
Create new application:
Press New to create a new Application. A 
dialogue window is displayed where the 
operator is asked to give a name to the 
new application.
Remove current application:
Press Delete to remove the current 
application. Factory Application settings 
cannot be deleted.
Save image/appl. settings
Press Save to store the changes applied 
to the current setting. Not applicable on 
factory application settings. Parameter Description 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual403
FC092326-03
Deletion of an Application
1. Press APPLICATION and select the application to delete.
2. Press 
APPLICATION again.
3. Trackball to Preset... in the Application pop-up menu.
The Application setup sheet (see Figure 12-4) is displayed.
4. Press Delete to remove the selected application. 
						

							Presets and System setup
404Vivid7/Vivid7 PRO Users Manual
FC092326-03
Application menu
The Application menu category enables rearrangement of the 
the Application menu to best suit the users requirements.
The Application menu is a two-levels pop-up menu. The first 
level called Application, displays the most frequently used 
applications in any desired order. The second level called 
More... displays the less frequently used applications.
 Figure 12-5: The Application menu setup sheet (example)
1. First menu level
2. Second menu level3. Moving tools 
						

							Presets and System setup
Vivid7/Vivid7 PRO Users Manual405
FC092326-03
Configuration of the Application menu
The Application menu can be configured by moving the 
applications up and down inside the pop-up menu and from 
one level to the other.
To move an application inside one level
1. Trackball to the application to move.
2. Press 
SELECT.
3. Press .
The application is moved one step up.
Press Default to 
get factory setting.4. Press .
The application is moved one step down.
To move an application from one level to the other
1. Trackball to the application to move.
2. Press 
SELECT.
3. Press as many times as necessary:
•   if the application to move is in the More menu
•   if the application to move is in the Applications menu
till the application has moved to the other menu. 
						

							Presets and System setup
406Vivid7/Vivid7 PRO Users Manual
FC092326-03
Measure
The Measure setup category enables the organization of the 
Factory default Measurement menu or the creation of user-
defined Measurement menus to best suit the users 
requirements. 
 Figure 12-6: The Measurement menu setup sheet
1. Configuration window (see next pages for 
details)2. The measurement menu (displays updated 
configuration)