Ricoh B230 Service Manual
Have a look at the manual Ricoh B230 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Installation Requirements SM 1-1 B230/B237 Installation 1. INSTALLATION 1.1 INSTALLATION REQUIREMENTS 1.1.1 ENVIRONMENT 1. Temperature Range: 10°C to 32°C (50°F to 89.6°F) 2. Humidity Range: 15% to 80% RH 3. Ambient Illumination: Less than 1500 lux (do not expose to direct sunlight) 4. Ventilation: 3 times/hr/person or more 5. Do not let the machine get exposed to the following: 1) Cool air from an air conditioner 2) Heat from a heater 6. Do not install the machine in areas that are exposed to corrosive gas. 7. Install the machine at locations lower than 2,500 m (8,200 ft.) above sea level. 8. Install the machine on a strong, level base. (Inclination on any side must be no more than 5 mm.) 9. Do not install the machine in areas that get strong vibrations. 1.1.2 MACHINE LEVEL Front to back: Within 5 mm (0.2) Right to left: Within 5 mm (0.2)
B230/B237 1-2 SM 1.1.3 MACHINE SPACE REQUIREMENTS ƒ This machine, which uses high voltage power sources, can generate ozone gas. High ozone density is harmful to human health. Therefore, the machine must be installed in a well-ventilated room. A: Over 100 mm (3.9) B: Over 100 mm (3.9) C: Over 100 mm (3.9) D: Over 100 mm (3.9) Put the machine near the power source with the clearance shown above. 1.1.4 POWER REQUIREMENTS ƒ Insert the plug firmly in the outlet. ƒ Do not use an outlet extension plug or cord. ƒ Ground the machine. 1. Input voltage level: 120 V, 60 Hz: More than 12 A 220 V to 240 V, 50 Hz/60 Hz: More than 8 A 2. Permissible voltage fluctuation: ±10 % 3. Do not put things on the power cord.
SM 1-3 B230/B237 Installation 1.2 OPTIONAL UNIT COMBINATIONS 1.2.1 MACHINE OPTIONS No. Options Remarks 1 2-tray paper feed unit 2 Large capacity tray One from No.1 or No.2 3 Platen cover 4 ARDF One from No.3 or No.4 5 1-bin tray unit - 6 Bridge unit 7 Shift tray One from No.6 or No.7 8 1000-sheet booklet finisher One from No.8, No.10 or No.11; Requires No.6 and one from No.1 and No.2. 9 *Punch kit (3 types) No. 8 required; One of the three types 10 1000-sheet finisher One from No.8, No.10 or No.11; Requires No.6 and one from No.1 and No.2. 11 500-sheet finisher One from No.8, No.10 or No.11; Requires No.6. *: Child options (Child options require a parent option.)
B230/B237 1-4 SM 1.2.2 CONTROLLER OPTIONS No. Options Remarks 1 IEEE 1394 2 USB Host Interface Unit One from the two (I/F Slot A) 3 IEEE 802.11b 4 IEEE 1284 5 Bluetooth One from the three (I/F Slot B) 6 File Format Converter I/F Slot C Requires fax unit option (B786) 7 PostScript 3 8 PictBridge Option 9 Data Overwrite Security Unit One from the three (SD card slot 2) 11 Browser Unit SD card slot 3 (during installation only) 12 Copy Data Security Unit -
SM 1-5 B230/B237 Installation 1.3 COPIER INSTALLATION ƒ Make sure that the image transfer belt is in its correct position before you move the machine. Otherwise, the image transfer belt and the black PCU can be damaged. 1.3.1 POWER SOCKETS FOR PERIPHERALS ƒ Rating voltage for peripherals. ƒ Make sure to plug the cables into the correct sockets.
B230/B237 1-6 SM 1.3.2 INSTALLATION FLOW CHART This flow chart shows the best procedure for installation. You need the optional paper tray unit or the LCT if you want to install the finisher (B408 or B793). The punch unit is for 1000-sheet booklet finisher (B793).
SM 1-7 B230/B237 Installation 1.3.3 ACCESSORY CHECK Check the quantity and condition of these accessories. Description Qty Destination 1. Operating Instruction - Troubleshooting 1 -57 -29 -58 -21 -19 2. Operating Instruction - About This Machine 1 -57 -29 -58 -21 -19 3. Operating Instruction - Security 1 -57 -29 -58 -21 -19 4. Operation Instruction - Quick Reference Guide 1 -29 -21 -19 5. Operation Instruction - Printer Quick Reference 1 -29 -21 -19 6. Operation Instruction - Scanner Quick Reference 1 -29 -21 -19 7. CD-ROM - Instruction 1 -29 8. CD-ROM - Printer Instruction - RIC 1 -67 -29 -26 9. CD-ROM - Printer Instruction - NRG 1 -67 10. CD-ROM - Printeer Instruction - LAN 1 -67 11. CD-ROM - Scanner Instruction - RIC 1 -67 -29 -26 12. CD-ROM - Scanner Instruction - NRG 1 -67 13. CD-ROM - Scanner Instruction - LAN 1 -67 14. Model Name Decal 1 -57 -67 -29 -58 15 Stamp 1 -57 -29 -28 -19 -58 16 Cloth Holder 1 -57 -67 -29 -28 -21 -19 -58 -26 17 Exposure Glass Cleaning Cloth 1 -57 -67 -29 -28 -21 -19 -58 -26 18 Rivet 2 -57 -67 -29 -28 -21 -19 -58 -26
B230/B237 1-8 SM Description Qty Destination 19 Operating Instructions Holder 1 -57 -67 -29 -28 -21 -19 -58 -26 20 Ferrite Core 1 -57 -67 -29 -28 -21 -19 -58 -26 21 Power Supply Cord 1 -57 -67 -29 -28 -21 -19 -58 22 Cover 1 -57 -67 -29 -28 -21 -19 -58 -26 23 Decal - Paper Size 1 -57 -67 -29 -28 -21 -19 -58 -26 24 Emblem Cover 1 -57 -67 -29 -58 25 Sheet - Eula: 16 Languages 1 -57 -67 -29 -26 -58 26 Sheet - Caution 16 Languages 1 -57 -67 -29 -26 -58 27 Decal - Safety Sheet 1 -67 -26 28 Decal - Caution - Original 1 -67 -29 -28 -26 -57 -58 29 Sheet Data 1 -67 -29 -28 -26 -21 30 Decal - Caution - Inkjet 1 -67 -26 (14 Lang.) 31 Sheet - Caution - Security Reference 1 -29 32 Warranty Sheet (Chinese) 1 -21 33 Sheet - Name - Tel 1 -21