Ricoh B230 Service Manual

							 
SM 5-245 B230/B237 
Service 
Tables 
firmware update is done with the firmware files 
from the URL. 
086 Firmware Size Allows the service technician to confirm the size of 
the firmware data files during the firmware update 
execution. 
087  CERT: Macro Version Displays the macro version of the NRS 
certification. 
088  CERT: PAC Version  Displays the PAC version of the NRS certification. 
089  CERT: ID2 Code Displays ID2 for the NRS certification. Spaces are 
displayed as underscores (_). Asteriskes () 
indicate that no NRS certification exists. 
090 CERT: Subject Displays the common name of the NRS 
certification subject. CN = the following 17 bytes. 
Spaces are displayed as underscores (_). 
Asterisks () indicate that no DESS exists. 
091  CERT: Serial Number Displays serial number for the NRS certification. 
Asterisks () indicate that no DESS exists. 
092 CERT: Issuer Displays the common name of the issuer of the 
NRS certification. CN = the following 30 bytes. 
Asteriskes () indicate that no DESS exists. 
093 CERT: Valid Start Displays the start time of the period for which the 
current NRS certification is enabled. 
094 CERT: Valid End Displays the end time of the period for which the 
current NRS certification is enabled. 
Selection Country 
150 Select from the list the name of the country where Cumin-M is installed in the 
machine. After selecting the country, you must also set the following SP 
codes for Cumin-M: 
ƒ SP5816-153 
ƒ SP5816-154  
						

							 
B230/B237 5-246  SM 
ƒ SP5816-161 
0: Japan, 1: USA, 2: Canada, 3: UK, 4: Germany, 5: France, 6: Italy,   
7: Netherlands, 8: Belgium, 9: Luxembourg, 10: Spain 
Line Type Authentication Judgment 
151 Touch [Execute]. 
Setting this SP classifies the telephone line where Cumin-M is connected as 
either dial-up or push type, so Cumin-M can automatically distinguish the 
number that connects to the outside line. 
ƒ  The current progress, success, or failure of this execution can be 
displayed with SP5816-152. 
ƒ  If the execution succeeded, SP5816-153 will display the result for 
confirmation and SP5816-154 will display the telephone number for the 
connection to the outside line. 
Line Type Judgment Result 
152 Displays a number to show the result of the execution of SP5816 151. Here is 
a list of what the numbers mean. 
0: Success 
1: In progress (no result yet). Please wait. 
2: Line abnormal 
3: Cannot detect dial tone automatically 
4: Line is disconnected 
5: Insufficient electrical power supply 
6: Line classification not supported 
7: Error because fax transmission in progress – ioctl() occurred. 
8: Other error occurred 
9: Line classification still in progress. Please wait. 
Selection Dial/Push 
153 This SP displays the classification (tone or pulse) of the telephone line to the 
access point for Cumin-M. The numbered displayed (0 or 1) is the result of 
the execution of SP5816 151. However, this setting can also be changed 
manually. 
[0 to 1/ 0 / 1 /step]  
						

							 
SM 5-247 B230/B237 
Service 
Tables 
0: Tone Dialing Phone 
1: Pulse Dialing Phone 
Inside Japan 2 may also be displayed: 
0: Tone Dialing Phone 
1: Pulse Dialing Phone 10PPS 
2: Pulse Dialing Phone 20PPS 
Outside Line/Outgoing Number 
154 The SP sets the number that switches to PSTN for the outside connection for 
Cumin-M in a system that employs a PBX (internal line). 
ƒ  If the execution of SP5816 151 has succeeded and Cumin-M has 
connected to the external line, this SP display is completely blank. 
ƒ  If Cumin-M has connected to an internal line, then the number of the 
connection to the external line is displayed. 
ƒ  If Cumin-M has connected to an external line, a comma is displayed with 
the number. The comma is inserted for a 2 sec. pause. 
ƒ  The number setting for the external line can be entered manually 
(including commas). 
Dial Up User Name 
156 Use this SP to set a user name for access to remote dial up. Follow these 
rules when setting a user name: 
ƒ  Name length: Up to 32 characters 
ƒ  Spaces and # allowed but the entire entry must be enclosed by double 
quotation marks (). 
Dial Up Password   
157 Use this SP to set a password for access to remote dial up. Follow these 
rules when setting a user name: 
ƒ  Name length: Up to 32 characters 
ƒ  Spaces and # allowed but the entire entry must be enclosed by double 
quotation marks (). 
Local Phone Number 
161 
Use this SP to set the telephone number of the line where Cumin-M is  
						

							 
B230/B237 5-248  SM 
connected. This number is transmitted to and used by the Call Center to 
return calls. 
Limit: 24 numbers (numbers only) 
Connection Timing Adjustment: Incoming 
162 When the Call Center calls out to a Cumin-M modem, it sends a repeating ID 
tone (*#1#). This SP sets the line remains open to send these ID tones after 
the number of the Cumin-M modem is dialed up and connected.   
[0 to 24 / 1 / 1 /step] 
The actual amount of time is this setting x 2 sec. For example, if you set 2 
the line will remain open for 4 sec. 
Access Point 
163 This is the number of the dial-up access point for Cumin-M. If no setting is 
done for this SP code, then a preset value (determined by the country 
selected) is used.   
Default: 0 
Allowed: Up to 16 alphanumeric characters 
164 Line Connecting 
 This SP sets the connection conditions for the customer. This setting 
dedicates the line to Cumin-M only, or sets the line for sharing between 
Cumin-M and a fax unit. 
[0 to 1 / 0 / 1 /step] 
0: Sharing Fax 
1: No Sharing Fax 
 
ƒ  If this setting is changed, the copier must be cycled off and on. 
ƒ  SP5816 187 determines whether the off-hook button can be used to 
interrupt a Cumin-M transmission in progress to open the line for fax 
transaction. 
173  Modem Serial Number This SP displays the serial number registered for 
the Cumin-M. 
174 Retransmission Limit  
						

							 
SM 5-249 B230/B237 
Service 
Tables 
Normally, it is best to allow unlimited time for certification and ID2 update 
requests, and for the notification that the certification has been completed. 
However, Cumin-M generates charges based on transmission time for the 
customer, so a limit is placed upon the time allowed for these transactions. 
If these transactions cannot be completed within the allowed time, do this SP 
to cancel the time restriction. 
175  Modem Modulation Mode Setting 
FAX TX Priority  - 
187 This SP determines whether pushing the off-hook button will interrupt a 
Cumin-M transmission in progress to open the line for fax transaction. This 
SP can be used only if SP5816 164 is set to 0. 
[0 or 1/ 0 / - ] 
0: Disable, 1: Enable 
200 Manual Polling  -  Executes the manual polling. 
Regist: Status 
201 Displays a number that indicates the status of the NRS service device. 
0: Neither the NRS device nor Cumin device are set. 
1: The Cumin device is being set. Only Box registration is completed. In this 
status the Basil unit cannot answer a polling request. 
2: The Cumin device is set. In this status the Basil unit cannot answer a 
polling request. 
3: The NRS device is being set. In this status the Cumin device cannot be set.
4: The NRS module has not started. 
202 Letter Number Allows entry of the number of the request needed 
for the Cumin device. 
203  Confirm Execute  Executes the inquiry request to the NRS GW URL.
204 Confirm Result 
 Displays a number that indicates the result of the inquiry executed with 
SP5816 203. 
0: Succeeded  
						

							 
B230/B237 5-250  SM 
1: Inquiry number error 
2: Registration in progress 
3: Proxy error (proxy enabled) 
4: Proxy error (proxy disabled) 
5: Proxy error (Illegal user name or password) 
6: Communication error 
7: Certification update error 
8: Other error 
9: Inquiry executing 
Confirm Place 
205 Displays the result of the notification sent to the device from the GW URL in 
answer to the inquiry request. Displayed only when the result is registered at 
the GW URL. 
206 Register Execute  Executes Cumin Registration. 
Register Result 
207 Displays a number that indicates the registration result. 
0: Succeeded 
2: Registration in progress 
3: Proxy error (proxy enabled) 
4: Proxy error (proxy disabled) 
5: Proxy error (Illegal user name or password) 
6: Communication error 
7: Certification update error 
8: Other error 
9: Registration executing 
Error Code 
Displays a number that describes the error code that was issued when either 
SP5816-204 or SP5816-207 was executed. 
Cause Code Meaning 
208 
Illegal Modem  -11001  Chat parameter error  
						

							 
SM 5-251 B230/B237 
Service 
Tables 
-11002  Chat execution error Parameter 
-11003 Unexpected error 
-12002 Inquiry, registration attempted without 
acquiring device status. 
-12003 Attempted registration without execution 
of an inquiry and no previous 
registration. 
Operation Error, 
Incorrect Setting 
-12004 Attempted setting with illegal entries for 
certification and ID2. 
-2385 Attempted dial up overseas without the 
correct international prefix for the 
telephone number. 
-2387  Not supported at the Service Center 
-2389  Database out of service 
-2390  Program out of service 
-2391  Two registrations for same device 
-2392 Parameter error 
-2393  Basil not managed 
-2394  Device not managed 
-2395  Box ID for Basil is illegal 
-2396  Device ID for Basil is illegal 
-2397  Incorrect ID2 format 
Error Caused by 
Response from GW 
URL 
-2398  Incorrect request number format 
209  @Remote Setting Clear  Releases the machine from its Cumin setup. 
250  CommLog Print  Prints the communication log. 
  
						

							 
B230/B237 5-252  SM 
5821 [Remote Service Address]  
001  CSS-PI Device Code Sets the PI device code. After you change 
this setting, you must turn the machine off 
and on.   
[0 to 4 / 0 / 1 /step] 
002 RCG IP Address *CTL
Sets the IP address of the RCG (Remote 
Communication Gate) destination for call 
processing at the remote service center. 
 
[NV-RAM Data Upload] 
5824 Uploads the UP and SP mode data (except for counters and the serial 
number) from the NVRAM to an SD card. For details, see the  NVRAM Data 
Upload/Download in this section. 
5824 1  NV-RAM Data Upload  #  - 
 
[NV-RAM Data Download] 
5825 
Downloads the UP and SP mode data from an SD card to the NVRAM. For 
details, see the  NVRAM Data Upload/Download in this section. 
5825 1  NV-RAM Download  #  - 
 
5828 [Network Setting] *CTL
- 
050 1284 Compatibility 
(Centro) Enables or disables 1284 Compatibility. 
[0 or 1 / 1 / 1 / step] 
0: Disabled, 1: Enabled 
052 ECP (Centro) Enables or disables ECP Compatibility. 
[0 or 1 / 1 / 1 / step] 
0: Disabled, 1: Enabled 
 
ƒ  This SP is activated only when  
						

							 
SM 5-253 B230/B237 
Service 
Tables 
SP5-828-50 is set to 1. 
065 Job Spooling Enables/disables Job Spooling. 
[0 or 1 / 0 / 1 / step] 
0: Disabled, 1: Enabled 
066 Job Spooling Clear: 
Start  Ti m e Treatment of the job when a spooled job exists at 
power on. 
0: ON (Data is cleared) 
1: OFF (Automatically printed) 
069  Job Spooling (Protocol) Validates or invalidates the job spooling function 
for each protocol. 
0: Validates 
1: Invalidates 
bit0: LPR 
bit1: FTP 
bit2: IPP 
bit3: SMB 
bit4: BMLinkS 
bit5: DIPRINT 
bit6: sftp 
bit7: (Reserved) 
090  TELNET (0: OFF 1: ON)Enables or disables the Telnet protocol. 
[0 or 1 / 1 / – ] 
0: Disable, 1: Enable 
091  Web (0: OFF 1: ON) Enables or disables the Web operation. 
[0 or 1 / 1 / – ] 
0: Disable, 1: Enable 
145 Active IPv6 Link Local 
Address This is the IPv6 local address link referenced on 
the Ethernet or wireless LAN (802.11b) in the 
format:  
Link Local Address + Prefix Length 
The IPv6 address consists of a total 128 bits 
configured in 8 blocks of 16 bits each.  
						

							 
B230/B237 5-254  SM 
147 Active IPv6 Stateless 
Address 1 
149 Active IPv6 Stateless 
Address 2 
151 Active IPv6 Stateless 
Address 3 
153 Active IPv6 Stateless 
Address 4 
155 Active IPv6 Stateless 
Address 5 These SPs are the IPv6 status addresses (1 to 5) 
referenced on the Ethernet or wireless LAN 
(802.11b) in the format:   
Status Address + Prefix Length 
The IPv6 address consists of a total 128 bits 
configured in 8 blocks of 16 bits each. 
156 IPv6 Manual Address This SP is the IPv6 manually set address 
referenced on the Ethernet or wireless LAN 
(802.11b) in the format:   
Manual Set Address + Prefix Length 
The IPv6 address consists of a total 128 bits 
configured in 8 blocks of 16 bits each. 
158 IPv6 Gateway Address This SP is the IPv6 gateway address referenced 
on the Ethernet or wireless LAN (802.11b). The 
IPv6 address consists of a total 128 bits configured 
in 8 blocks of 16 bits each. 
 
5832 [HDD] HDD Initialization *CTL
- 
001  HDD Formatting (ALL)     
002  HDD Formatting (IMH) 
003 HDD Formatting 
(Thumbnail) 
004 HDD Formatting (Job 
Log) 
005  HDD Formatting (Printer Initializes the hard disk. Use this SP mode only if 
there is a hard disk error.