Vodavi Infinite Dvx Iii Hybrid Key Telephone System Installation Manual

							INITIALIZE DATABASE PARAMETERSin.nite’“l DVK I’
DigitaI Key Telephone System
cl1
GHIcl4
PRScl
7ABC
cl
DEF2
cl3
JKLclMN05
cl
6OPER
cl
0Figure 770-2 
&Button Default Button Mapping
770-8
Issue 1, February 1994 
						

							infznitem DVX I’
Digital Key Telephone System
INITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
D.Initialize Station and CO Port
Parameters
Programming Steps
If Group Parameters need to be initialized:1. Press the Station/CO Port 
Parametersflexible button (Button 
#4). The following
message will be shown on the 
display
phone:Description
Station and CO Port parameters may be 
initial-
ized setting all stations and all CO Lines back
to their original, default values. The following
data fields are returned to their default values
upon initializing the CO/Station Port parame-
:;! ters*
2.To initialize the Station/CO Port parame-aters, press the HOLD button. Confirma-
tion tone will be heard.DEFAULT VALUE
8Card Slot #8 - Ports 85-96
Stations 184-195
Issue 1, February 1994
770-9 
						

							INITIALIZE DATABASE PARAMETERSinfinitem DVX I’Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
E. Initialize Exception Tables
Programming Steps
If Exception Tables need to be initialized:
1.Press the Exception Tables flexible button
(Button 
#5). The following message will beshown on the display phone:
2. To initialize the Exception Tables, press
the HOLD button. Confirmation tone will
be heard.Description
The Exception Table parameters including the
Allow/Deny Tables and the Special Tables may
be initialized setting all tables to their original,
default values. The following Tables are cleared
returning to their default value upon initializing
the Exception Tables parameters:IPROGRAM CODEFLEX
FEATUREDEFAULT VALUE
BUTTON(after initializing)FLASH 70
1Allow Table - ATable Cleared (no entries
2Deny Table 
- ATable Cleared (no entries)
Table Cleared(no entries 
						

							infhite” DVX I’Digital Key Telephone System
INITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
F.InitiaIize System Speed Numbers
Programming Steps
If System Speed bins need to be initialized:
1. Press the System Speed flexible button
(Button #6). The following message will beshown on the display phone:
DescriptionNumbers entered into the System Speed dial
Table may be initialized clearing all bins to theiroriginal, default value (empty). All bins 20
through 99 are cleared returning to their de-
fault value (empty) upon initializing the Speed
2.To initialize the System Speed bins, pressthe HOLD button. Confirmation tone will
be heard.Issue 1, February 1994
770-l 1 
						

							INITIALIZE DATABASE PARAMETERSinfinite’l” DVK I’Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
G. Initialize LCR Tables
Programming StepsDescription
If 
LCRTables need to be initialized:The LCR Tables may be initialized setting all
1.Press the LCR Tables flexible button (But-tables to their original, default values. The fol-ton 
#7). The following message will belowing tables will be reset to their original de-shown on the display phone:
fault value after initialization of the LCR tables:l 3-Digit Table
l 6-Digit Table
2. To initialize the LCR Tables, press the
HOLD button. Confirmation tone will be
heard.
l Insert/Delete Table
l Daily Start Time Table4l Weekly Schedule
l Toll Information Route
770- 12Issue 1, February 1994 
						

							infkitem DVX I’
Digital Key Telephone System
INITIALIZE DATABASE PARAMETERS
INIT. DATABASE PARAMETERS (Cont’d)
H.
InitiaIize System Database and Reset
(all parameters)
Programming Steps
Description
If System needs to be initialized:
1.Press the System and Reset flexible button
(Button 
#S) . The following message will beshown on the display phone:
2. To initialize the entire system database,
press the HOLD button. The system will
perform a hard reset.To completely initialize the database area in-
cluding all non-programmable parameters held
in Static RAM 
(SRAM) and reset the system alsoclearing any meantime errors that may exist
this command may be used. The system will
require reprogramming of any customer spe-
cific data after using this command. This pro-
vides an easy way to re-initialize the system andclearing any meantime errors that may have
accumulated inhibiting system operation or
performance..
Issue 1, February 1994
770-13 
						

							INITIALIZE DATABASE PARAMETERSinfiniteTM DVX I’Digital Key Telephone System
INIT. DATABASE PARAMETERS (Cont’d)
I.Initialize ICLID Parameters
Programming Steps
If the ICLID* Table(s) need to be initialized:Description
The ICLID Table parameters may be initialized1. Press the ICLID* TABLE flexible button
(Button #9). The following message will beshown on the display phone:setting all data fields to their original, defaultvalues.
2.To initialize the ICLID* Table(s), press theHOLD button. Confirmation tone will be
heard.4PROGRAM CODEFLEX
BUTI-ONFEATUREDEFAULT VALUE(after initializing)FLASH 43
FLASH 56
1ICLID* Ringing AssignmentsNo stations are assigned
1ICLID* Enable/DisableDisabled
2ICLID* Name EntryNumber is shown on LCD
3ICLID* Baud Rate Display2400 Baud
4ICLID* Port AssignmentPort #l
*Features available with optional software.
770-14Issue 1, February 1994 
						

							infznite” DVX I’Digital Key Telephone System
INIT. DATABASE PARAMET
ERS (Cont’d)INITIALIZE DATABASE PARAMETERS
J.Initialize Directory Dialing Table
Parameters
Programming Steps
If Directory Dialing Table Parameters need to be
initialized:
1.Press the Directory Dialing Table Parame-ters flexible button (Button 
# 10). The fol-
lowing message will be shown on the
display phone:
Descrintion
The Directory Dialing Table parameters may be
initialized setting all data fields to their original,
default values.2. To initialize the Directory Dialing Table
parameters, press the HOLD button. Con-
firmation tone will be heard.PROGRAM CODEFLEX
FEATUREDEFAULT VALUE
BUTTON
(after initializing)FLASH 23
Issue 1, February 1994 
						

							injinitem DVX I’
IlVfITIALIZE DATABASE PARAMETERS
IN-IT. DATABASE PARAMETERS (Cont’d)
K. Initialize Hunt Group Parameters
Programming Steps
If Group Parameters need to be initialized:
1.Press the Hunt Group Parameters flexiblebutton (Button 
#l 1). The following mes-
sage will be shown on the display phone:
Digital Key Telephone System
Description
Hunt Group parameters may be initialized 
set-ting all data fields to their original, default
values,2. To initialize the Hunt Group parameters,
press the HOLD button. Confirmation
tone will be heard.QPROGRAM CODEFLEX
FEATUREDEFAULT VALUE
BUTTON
(after initializing)FLASH 30l-8
Hunt Groups 450-457No Hunt Groups established
9Station or Pilot HuntingAll Hunt Groups default using
Pilot Hunting
770-16Issue 1, February 1994 
						

							infInite” DVX I’
Digital Key Telephone SystemINITIALIZE DATABASE PARAMETERS
INIT. DATABASE 
PARAMETERS (Cont’d)
L.Ix&.ialize ACD or UCD Group
Parameters
Programming StepsDescriptionIf ACD* or UCD Group Parameters need to be
initialized:
1.Press the ACD* or UCD Group Parameters
flexible button (Button 
# 12). The followingmessage will be shown on the display
phone:ACD* or UCD Group parameters may be initialized setting 
all data fields to their original,
default values.2. To initialize the ACD* or UCD Group pa-
rameters, press the HOLD button. Confir-
mation tone 
will be heard.PROGRAM CODEFLEX
FEATUREDEFAULT VALUE
BUTTON
(after initializing)FLASH 60A/ l-8ACD*/UCD Groups 550-557No Groups established
A/9Alternate ACD*/UCD GroupAssignmentsNo Alternates group
assignments is made
A/10ACD*/UCD Overflow
AssignmentNo Overflow assignment is madeACD*/UCD RAN
A/11Announcement TableNo RAN tables are specified
AssignmentsA/12
ACD* Supervisor ProgrammingNo Supervisor assignedFLASH 61B/1-8ACD*/UCD Station
AssigmnentsNo stations are assigned
1ACD*/UCD Ring Timer060 seconds
2ACD*/UCD Message Interval
Timer060 seconds
A/11ACD* RAN Announcement
Table AssignmentsNo RAN tables are specifiedA/12
ACD* Supervisor ProgrammingB/1-8
ACD* Station Assignments
*Features available with optional softwareNo Supervisor assigned
No stations are assignedIssue 1, February 1994
770-17