Canon Imageprograf Ipf815 User Guide

							2.
Place the pointer inside the selection box of the object to show the crosshair handle, and drag it to move the object.
Alternatively, 
you can move the Object Position by changing the values in  Vertical Pos, Horizontal Pos  and Page
Pos in the  Format Dialog Box →P.265
. Rotating an Object
You can rotate the object.
1. Select an object.
2. Select  Rotate Left 90 Degrees  or Rotate Right 90 Degrees from the toolbar.
Alternatively, 

you may click on the Rotate check box in the  Format Dialog Box →P.265
 
then select  Rotate Right
or Rotate Left, and click the  OK button. Windows Software 
> Free Layout >
iPF815
Rotating an Object 4
275
 
						

							Laying out Objects Automatically
Click  Auto Arrange Object in the tool bar. This automatically lays out objects. Alternatively, you may select  Auto Ar-
range Object  from the Object  menu. Note
• The object  layout  order  varies  depending  on  the  Order  setting  in  the Page  Options  Dialog  Box →P.263
dialog box. Aligning Objects
You can align objects systematically.
1. Select multiple objects.
2. Click the align button from the toolbar.
Alternatively, you may select the align menu from the  Object menu.Align Top
Lays out the objects, justifying them to the top. Windows Software 
> Free Layout >
Laying out Objects Automatically
iPF8154
276
 
						

							Center Vertically
Lays out the objects, justifying them to the vertical center. Align Bottom
Lays out the objects, justifying them to the bottom. Align Left
Lays out the objects, justifying them to the left. Windows Software > Free Layout >
iPF815
Aligning Objects 4
277
 
						

							Center Horizontally
Lays out the objects, justifying them to the horizontal center. Align Right
Lays out the objects, justifying them to the right. Changing the Object Overlapping Order
You can change the object overlapping order.
1. Select an object.
2. Select the Overlapping Order menu from the  Object menu.Note
• The order of overlapping affects the order of objects automatically laid out.
• You can also select by clicking the right button of the mouse on an object.
Windows Software > Free Layout >
Changing the Object Overlapping Order
iPF8154
278
 
						

							Bring to Front
Moves the object to the frontmost position. Send to Back
Moves the object to the backmost position. Bring Forward
Moves the object one position to the front. Windows Software > Free Layout >
iPF815
Changing the Object Overlapping Order 4
279
 
						

							Send Backward
Moves the object one position to the back. Pasting a Copied or Cut Object
1. Click Copy or Cut  from the toolbar.
Alternatively, you may select  Copy or Cut from the Edit menu.
2. Click Paste from the toolbar.
Alternatively, you may select  Paste from the Edit menu.Note
• The copied or cut object is laid out at the end of the page.
• You can also select by clicking the right button of the mouse on an object.
• In 
order  to  paste  an  object  on  any  position  that  you  like,  you  can  paste  the  object  with  Pointed  Paste  by
clicking the right button of the mouse on any position that you want.
Windows Software 
> Free Layout >
Pasting a Copied or Cut Object
iPF8154
280
 
						

							Folded Duplex Window
This window is displayed if you select  Folded Duplex from the Edit menu after selecting an object. Using the  Folded Du-
plex function allows you to print with fold lines added.
The  Folded Duplex window consists of the menu and tool bars, layout area and status bar. Note
• The toolbar and status bar can be toggled between hidden and displayed from the  View menu.Menu Bar
This allows you to select menus required for operations. Tool Bar
This allows you to select tool buttons required for major operations. Windows Software > Free Layout >
iPF815
Folded Duplex Window 4
281
 
						

							Layout Area
This allows you to check the arrangement and orientation of objects. Status Bar
This shows the paper source, roll paper width, and output size. Finished Size Settings Dialog Box
This dialog box is displayed when you select  Finished Size Settings from the Edit menu. This allows you to configure
finished size settings. Finished Size
Selects the method for setting the finished size.
Windows Software > Free Layout >
Finished Size Settings Dialog Box
iPF8154
282
 
						

							The following settings are available for the finished size.
Setting
Details
Fit Roll Paper Width Prints by automatically enlarging or reducing the entire document so that the width
of the document matches the roll paper width.
Specify Folded Size Prints by automatically enlarging or reducing the entire document to match the size
of the paper. Select the actual size of the paper you want to print on in  Fit Paper
Size.
Rotate Page 90 degrees (Con-
serve Paper) Prints by rotating pages by 90 degrees. Pages are automatically rotated if they will
fit within the roll paper width when rotated, and are not rotated if they will not fit
within the roll paper width. Binding Settings Dialog Box
This is displayed when you select  Binding Settings from the Edit menu. This allows you to configure the binding edge
settings. Binding Edge
Configures the binding edge when folding paper.
The following settings are available for the binding edge. Setting
Details
Bottom Prints by placing the binding margin (gutter) at the bottom of the document.
Top Prints by placing the binding margin (gutter) at the top of the document.Binding
Configures the binding margin (gutter).
Prints by creating a binding margin (gutter) of the specified size. Enter the margin size as a number. Note
• The values that can be entered are 0 to 50 (mm). Windows Software > Free Layout >
iPF815
Binding Settings Dialog Box 4
283
 
						

							Print Fold Lines
Configures the color and type of fold lines. Note
• To not print fold lines, clear the  Print Fold Lines checkbox.Fold Line Color
You can select the fold lines. Fold Line Type
You can select the fold lines.
The following settings are available for the fold line type. Setting
Details
Solid Line You can print the solid line as the frame style.
Dotted Line You can print the dotted line as the frame style.
Dashed Line You can print the dashed line as the frame style.Only Print Center and Edges
To print fold lines at the center and both edges, select the  Only Print Center and Edges checkbox.Prints using Folded Duplex
Allows you to produce duplex printing by combining two pages and folding them.
1. Select two objects from the layout area of Free Layout.
2. Select  Folded Duplex from the Edit menu of Free Layout.
Open the Folded Duplex window and arrange the selected objects in the layout area.
3. Open the Finished Size Settings dialog box from the  Edit menu.
4. Select Fit Roll Paper Width  or Specify Folded Size in Finished Size. Note
• Rotate Page 90 degrees (Conserve Paper)  is also available when Specify Folded Size is selected.
5. Click  OK to save the settings.
6. Open the  Binding Settings  dialog box from the  Edit menu.
7. Select  Bottom or Top in Binding Edge.
8. Specify the  Binding width in Binding.
Windows Software > Free Layout >
Prints using Folded Duplex
iPF8154
284