Canon Imageprograf Ipf815 User Guide

							If a message requests you to replace ink tanks, press the 
OK button.Do not remove an Ink Tank during initialization immediately after turning on the printer, or during printhead cleaning.
Note
• Ink Tank replacement is possible even when print jobs are being canceled or if paper is being advanced. Access the menu for Ink Tank replacement
Note
• This step is not necessary if a message requests you to replace ink tanks. Check the message on the Display
Screen and press the  OK button. Remove the Ink Tank at this point.
1. Press the Menu button to display  MAIN MENU.2.
Press ▲ or ▼  to select Rep. Ink Tank , and then press the ▶ button.
3. Press ▲ or ▼ to select  Yes, and then press the OK  button.
A message on the Display Screen requests you to open the Ink Tank Cover. Remove the Ink Tank at this point. Maintenance 
> Ink Tanks >
iPF815
Replacing Ink Tanks 11
805
 
						

							Remove the Ink Tank (330 ml)
1. Open the Ink Tank Cover of the tank for replacement and check the Ink Lamp.
The Ink Lamp flashes quickly if there is no ink left. 2.
Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops,
and then push it down to the front. Note
• Push the Ink Tank Lock Lever down until it locks.
• Make sure the Ink Tank Lock Lever does not return to the original position.
Maintenance 
> Ink Tanks >
Replacing Ink Tanks
iPF81511
806
 
						

							3.
Hold the Ink Tank by the grips (a) and remove it. Press the  OK button. Caution
• If there  is  still  ink  in  the  Ink  Tank  you  removed,  store  it  with  the  ink  holes  (a)  facing  up.  Otherwise,
ink may leak and cause stains. Put the Ink Tank in a plastic bag and seal it. Note
• Dispose of used ink tanks according to local regulations. Maintenance 
> Ink Tanks >
iPF815
Replacing Ink Tanks 11
807
 
						

							Remove the Ink Tank (700 ml)
1. Open the Ink Tank Cover of the tank for replacement and check the Ink Lamp.
The Ink Lamp flashes quickly if there is no ink left. 2.
Lift the stopper (a) of the Ink Tank Lock Lever for the color to replace. Lift the Ink Tank Lock Lever until it stops,
and then push it down to the front. Note
• Push the Ink Tank Lock Lever down until it locks.
• Make sure the Ink Tank Lock Lever does not return to the original position.
Maintenance 
> Ink Tanks >
Replacing Ink Tanks
iPF81511
808
 
						

							3.
Hold the Ink Tank by the handle (a) and remove it. Press the  OK button.Caution
• If there  is  still  ink  in  the  Ink  Tank  you  removed,  store  it  in  the  box  with  the  ink  holes  (a)  facing  up.
Otherwise, ink may leak and cause stains. Note
• Dispose of used ink tanks according to local regulations. Maintenance 
> Ink Tanks >
iPF815
Replacing Ink Tanks 11
809
 
						

							Load the ink tank (330 ml)
1. Before opening the pouch, tilt the Ink Tank to the left and right gently seven or eight times. Important
• If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality.
2. Open the pouch and remove the Ink Tank. Important
• Never touch  the  ink  holes  or  electrical  contacts.  This  may  cause  stains,  damage  the  Ink  Tank,  and
affect printing quality.
• Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
Maintenance 
> Ink Tanks >
Replacing Ink Tanks
iPF81511
810
 
						

							3.
Press the OK  button and insert the Ink Tank into the holder with the ink holes facing down, as shown. Note
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If  the  Ink  Tank  does  not  fit  in  the  holder,  do  not  force  it  into  the  holder.  Make  sure  the  color  of  the
Ink  Tank  Lock  Lever  matches  the  color  of  the  Ink  Tank,  and  check  the  orientation  of  the  Ink  Tank before reloading it.
4. Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place. 5.
Make sure the Ink Lamp is lit in red. Maintenance 
> Ink Tanks >
iPF815
Replacing Ink Tanks 11
811
 
						

							Note
• If the Ink Lamp is not lit in red, reload the tank.
6. Close the Ink Tank Cover. The printer will go online or offline.
Load the ink tank (700 ml)
1. Before 
opening the pouch, hold the new Ink Tank with both hands and tilt it to the left and right as shown, shaking
gently it seven or eight times. Important
• If you do not agitate the Ink Tank, the ink may sediment, which may affect printing quality.
Maintenance 
> Ink Tanks >
Replacing Ink Tanks
iPF81511
812
 
						

							2.
Open the pouch and remove the Ink Tank. Important
• Never touch  the  ink  holes  or  electrical  contacts.  This  may  cause  stains,  damage  the  Ink  Tank,  and
affect printing quality.
• Do not remove and agitate ink tanks that have already been installed in the printer. Ink may leak out.
3. Press the OK  button and insert the Ink Tank into the holder with the ink holes facing down, as shown. Note
• Ink tanks cannot be loaded in the holder if the color or orientation is incorrect.
If 
 the  Ink  Tank  does  not  fit  in  the  holder,  do  not  force  it  into  the  holder.  Make  sure  the  color  of  the
Ink  Tank  Lock  Lever  matches  the  color  of  the  Ink  Tank,  and  check  the  orientation  of  the  Ink  Tank before reloading it. Maintenance 
> Ink Tanks >
iPF815
Replacing Ink Tanks 11
813
 
						

							4.
Lift the Ink Tank Lock Lever until it stops, and then push it down until it clicks into place. 5.
Make sure the Ink Lamp is lit in red. Note
• If the Ink Lamp is not lit in red, reload the tank.
6. Close the Ink Tank Cover. The printer will go online or offline.
Maintenance > Ink Tanks >
Replacing Ink Tanks
iPF81511
814