Canon Imageprograf Ipf815 User Guide

							•
Display of printer-related information
Job Mgmt Menu •Job management menu operations
For a description of specific items available in the main menu during printing,  see "Main Menu Settings (During Print-
ing)." →P.734
For instructions on selecting and setting main menu items during printing,  see "Main Menu Operations." →P.705
Submenu operations
Access submenus by pressing the Information button on the Control Panel. You can check the following information in
submenus.
•Remaining Maintenance Cartridge capacity
• Ink levels
• Information on the loaded paper
• Printer information
• HP-GL/2 setting information
For a description of specific items displayed in submenus,  see "Submenu Display." →P.735
Main Menu Operations
Press the Menu button to display the main menu. For details,  see "Main Menu Settings." →P.722
• Main menu (displayed if you press the  Menu button when printing is not in progress)•
Menu selection (if you press the  Menu button when printing is in progress)Note
• The main menu will not be displayed in the following case even if you press the  Menu button.
• When an error message is displayed
You can switch to Menu mode after the problem is solved. Printer Parts > Control Panel >
iPF815
Main Menu Operations 9
705
 
						

							Simply press buttons on the Control Panel to access various function menus from the main menu and set or execute menu
items.
The following section describes menu operations and how they are presented in this 
User Manual.
• Accessing menus →P.706
• Specifying menu items →P.707
• Specifying numerical values →P.707
• Executing menu commands →P.708
Accessing menus
Printer menus are grouped by function.
Menus are displayed with the upper line selected. Use the buttons on the Control Panel to access each menu. •
Press  ▲ to  access a higher level menu on the same screen, and press  ▼ to access a lower one. If not all menus can be
displayed on the screen at once, press  ▲ and ▼ to scroll the menu. Items you select are highlighted. The scroll bar at right indicates the current position in the overall menu.
• Lower 

level menus are available if  ▶ is displayed at right. To access these lower level menus, select a menu and press
▶.
Printer Parts 
> Control Panel >
Main Menu Operations
iPF8159
706
 
						

							•
Upper level menus are available if  ◀ is displayed at left in the top line. To access these upper level menus, press  ◀.Specifying menu items
Follow these steps to specify menu items.
1. Press  ▲ or ▼ to select a menu, and then press the  ▶ button.
Repeat these steps until the desired menu options are displayed.
2. Press ▲ or ▼ to select a setting item to complete, and then press the  OK button.
The check box at left is selected, and the setting is confirmed. After two seconds, the display reverts to the upper level menu.
3. Press the Online  button to bring the printer online. Note
• If a  confirmation  message  is  displayed  regarding  the  setting  you  entered,  press  the  OK  button.  The
setting is applied, and the printer goes online. Specifying numerical values
Follow these steps to enter numbers. In this example, network settings items are entered.
1. Press ▲ or ▼ to select  Interface

 Setup, and then press the  ▶ button. Printer Parts 
> Control Panel >
iPF815
Main Menu Operations 9
707
 
						

							2.
Press ▲ or ▼ to select  TCP/IP, and then press the  ▶ button.
3. Press ▲ or ▼ to select  IP Setting, and then press the  ▶ button.
4. Press ▲ or ▼ to select  IP Address, and then press the ▶ button.
5. Press  ◀ or ▶ to move the cursor (_) to each field for entering numbers. 6.
Press  ▲ or ▼ to enter the number, and then press the  OK button.Note
• Hold down ▲ or ▼ to increase or decrease the value continuously.
• Make 
sure the IP address you enter for the printer is not the same as any computer IP address in your
network.
7. Repeat steps 5 and 6 to continue entering numbers.
8. Press the Online button to bring the printer online. Note
• If 
a  confirmation  message  is  displayed  regarding  the  setting  you  entered,  press  the  OK  button.  The
setting is applied, and the printer goes online. Executing menu commands
Follow these steps to execute menu commands.
1. Press ▲ or ▼ to select a menu, and then press the  ▶ button.
Repeat these steps until the desired menu options are displayed.
Printer Parts 
> Control Panel >
Main Menu Operations
iPF8159
708
 
						

							2.
Press ▲ or ▼ to select a setting item to execute, and then press the  OK button.After two seconds, the menu command is executed. After commands are executed, in most cases the printer reverts
to the state before the menu operation, either online or offline. Menu Structure
Main Menu
The structure of the main menu is as follows. Values at right indicated by an asterisk * are the defaults.
For instructions on menu operations,  see "Main Menu Operations." →P.705
For details on menu items,  see "Main Menu Settings." →P.722
. First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper
Cutting
(*1
→P.720
) No *
Yes Rep. Ink
Tank
No *
Yes Head
Cleaning
Head Cleaning A *
Head Cleaning B Auto Feed
(*11
→P.721
) No *
Yes Printer Parts > Control Panel >
iPF815
Menu Structure 9
709
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Take-up
Reel
(*9
→P.721
) Disable *
Enable Paper
Menu
Cut Sheet
Type(The paper type is displayed here.) (
*5 →P.720
)
Roll Me-
dia Type
(*1 →P.720
) (The paper type is displayed here.) (
*5 →P.720
) Roll
Length Set
(*1
→P.720
),
(*2 →P.720
) ##.# m
### feet (*13 →P.721
) ManageR-
emainRoll
Off *
On Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.720
) Roll Dry-
ingTime
Off
30 sec.
1 min.
3 min.
5 min.
10 min.
30 min.
60 min. Scan Wait
Time Dry time Off *
1 sec.
3 sec.
5 sec.
7 sec.
9 sec. Area
(*14
→P.721
) Entire area *
Leading edge Feed Pri-
ority
Automatic *
Band Joint
Print LengthPrinter Parts > Control Panel >
Menu Structure
iPF8159
710
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.720
) Adjust
Length A
From –0.70% to 0.70%
Adjust
Length B From –0.70% to 0.70% Head
Height
Automatic *
Highest
High
Standard
Low
Lowest Skew
Check Lv.
Standard *
Loose
Off Vac-
uumStrng
th
Automatic *
Strongest
Strong
Standard
Weak
Weakest Width De-
tection
Off
On * NearEnd
RollMrgn
3mm
20mm Cut Speed Fast
Standard
Slow Trim Edge
First
Automatic
Off
On Cutting
Mode
Automatic
Eject
Manual Bordless
Margin
Automatic
Fixed CutDus-
tReduct.
Off
On NearEnd
Sht Mrgn
3mm
20mm Printer Parts > Control Panel >
iPF815
Menu Structure 9
711
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Paper De-
tails (The paper
type is dis-
played
here.)
(*5
→P.720
) Return
Defaults
No
Yes Job Man-
agement Print Job Job List (Choose a
print job.)
Delete
Preempt Jobs Stored Job Mailbox
List (Enter a
password if
one has
been set.) Job List Print
Delete Print Job
List
No
Yes Job Log (Choose
from infor-
mation
about the
latest three
print jobs.)
Document Name
User Name
Page Count Job Status OK
CANCELED
Print Start
Time yyyy/mm/dd hh:mm
Print End
Time yyyy/mm/dd hh:mm
Print
Time xxxsec.
Print Size xxxxxxxxsq.mm
Media Type Interface USB
Network
Ink Con-
sumed (The total
amount of
ink con-
sumed and
ink colors
are dis-
played
here.)xxx.xxx ml
HDD In-
formation HDDSpace :xx.x GB GL2 Set-
tings Quality
Manager Color
Mode
Monochrome
Color (CAD) 1 *
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4Printer Parts > Control Panel >
Menu Structure
iPF8159
712
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level GL2 Set-
tings Quality
Manager Color
Mode
Color (CAD) 5
Color (CAD) 6 Print
Quality
Fast
Standard *
High Input Res-
olution
600dpi *
300dpi Print
(Econo-
my)
Off *
On Paper
Manager Paper
Source
Automatic *
Roll Paper
Cut Sheet Margin 3mm(Standard) *
5mm Conserve
Paper
Off *
On Auto Ro-
tate
Off *
On Nesting Use Nest-
ing
Off *
On
Nesting
WaitTime xx min. Cut Lines Off *
On Line &
Pen Man-
ager Enable
merge
Off *
On Pen Setup Select Pa-
lette
Software *
Palette A
Palette B
Factory Define Pa-
lette Palette A (Select the
pen num-
ber)
Width
(Indicates the
value of Width
)
Color 0～255 Line At-
tributes
No Setting
Circle Setting Printer Parts > Control Panel >
iPF815
Menu Structure 9
713
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level GL2 Set-
tings Line &
Pen Man-
ager Pen Setup Define Pa-
lette
Palette B
(Select the
pen num-
ber)(Indicates
Width,
Color, and
Line At-
tributes )(Specify the
values of
Width, Color,
and Line At-
tributes )
Factory (Select the
pen num-
ber)(Indicates 
Width, Color , and
Line Attributes ) Reset Pa-
lette
All Palette
Palette A
Palette B Smoothing Software *
Smooth Thicken-
FineLines
Off *
On Adjust-
FaintLines
Off
On * Processin-
gOption Warning Off *
On On-the-
Fly
Off *
On PageSize-
Process1
Off *
On PageSize-
Process2
Off *
On Adjust
Printer Auto Head
Adj. Standard
Adj.
No
Yes Advanced
Adj.
No
Yes Auto Print Off
On * Manual
Head Adj
(*10
→P.721
) No
Yes Auto Band
Adj. Standard
Adj.
No
Yes Advanced
Adj.
No
YesPrinter Parts > Control Panel >
Menu Structure
iPF8159
714