Canon Imageprograf Ipf815 User Guide

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Adjust
Printer
Manual
Band Adj
No
Yes Adjust
Length
(*3
→P.720
) A:High No
Yes B:Stand-
ard/Draft
No
Yes Head Inc.
Adj.
No
Yes Interface
Setup
(*15
→P.721
) EOP Tim-
er
(*15
→P.721
) 10 sec.
30 sec.
1 min.
2 min.
5 min.
10 min. *
30 min.
60 min. TCP/IP
(*15
→P.721
) IP Mode
(*15
→P.721
) Automatic
Manual * Protocol
(*4
→P.720
)
(*15 →P.721
) DHCP
(*15
→P.721
) On
Off * BOOTP
(*15
→P.721
) On
Off * RARP
(*15
→P.721
) On
Off * IP Setting
(*12
→P.721
)
(*16 →P.721
) IP Ad-
dress
0.0.0.0–255.255.255.255
Subnet
Mask 0.0.0.0–255.255.255.255
Default G/
W 0.0.0.0–255.255.255.255 NetWare
(*15
→P.721
) NetWare
(*15
→P.721
) On
Off * Printer Parts > Control Panel >
iPF815
Menu Structure 9
715
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Interface
Setup
(*15
→P.721
) NetWare
(*15
→P.721
) Frame
Type
(*6
→P.721
)
(*15 →P.721
) Auto Detect
Ethernet 2
Ethernet 802.2 *
Ethernet 802.3
Ethernet SNAP Print
Service
(*6
→P.721
)
(*15 →P.721
) BinderyPServer
RPrinter
NDSPServer *
NPrinter AppleTalk
(*15
→P.721
) On
Off * Ethernet
Driver
(*15
→P.721
) Auto De-
tect
(*15
→P.721
) On *
Off Comm.Mo
de
(*7
→P.721
)
(*15 →P.721
) Half Duplex *
Full Duplex Ethernet
Type
(*7
→P.721
)
(*15 →P.721
) 10 Base-T *
100 Base-TX Spanning
Tree
(*15
→P.721
) Not Use
 *
Use
MAC Ad-
dress
(*15 →P.721
) 000085XXXXXXPrinter Parts > Control Panel >
Menu Structure
iPF8159
716
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level Interface
Setup
(*15
→P.721
) Return
Defaults
(*16
→P.721
) No *
Yes Mainte-
nance Repl.
maint cart
No
Yes Replace
P.head
No
Yes Repl. S.
Cleaner
No
Yes Move
Printer
Level 1 *
Level 2
Level 3 System
Setup Warning Buzzer Off
On * Detect
Mismatch
Pause
Warning
None * Skip
Take-Up
Err
(*9
→P.721
) Off *
On Keep Pa-
per Size
Off *
On Paper Size
Basis Sht Selec-
tion 1
ISO A3+ *
13"x19"(Super B) Sht Selec-
tion 2
ISO B1
28"x40" (ANSI F) TrimEdge
Reload
Automatic
Off *
On Noz.
Check
Freq.
Off
1 page
10 pages
Automatic * Carria-
geS-
canWdth
Automatic *
Fixed Printer Parts > Control Panel >
iPF815
Menu Structure 9
717
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level System
Setup
Sleep Tim-
er
(*17
→P.721
) 5 min. *
10 min.
15 min.
20 min.
30 min.
40 min.
50 min.
60 min.
240 min. Length
Unit
meter *
feet/inch Time Zone
(*15
→P.721
) 0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
+6:Dacca
+7:Bangkok
+8:Hong Kong
+9:Tokyo,Seoul
+10:Canberra
+11NewCaledonia
+12:Wellington
-12:Eniwetok
-11:Midway is.
-10Hawaii(AHST)
-9:Alaska(AKST)
-8:Oregon (PST)
-7:Arizona(MST)
-6:Texas (CST)
-5:NewYork(EST)
-4:Santiago
-3:Buenos Aires
-2:
-1:Cape Verde Printer Parts > Control Panel >
Menu Structure
iPF8159
718
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level System
Setup
Date For-
mat
(*15
→P.721
) yyyy/mm/dd *
dd/mm/yyyy
mm/dd/yyyy Date &
Time
(*15
→P.721
) Date yyyy/mm/dd (*8 →P.721
)
Time hh:mm Language
*
Contrast
Adj.
–4,–3,–2,–1,0*,+1,+2,+3,+4 Reset
Papr-
Setngs
(*15
→P.721
) No
Yes Erase
HDD Data High
Speed
(*15
→P.721
) No
Yes Secure
High Spd.
(*15
→P.721
) No
Yes Secure
(*15
→P.721
) No
Yes Output
Method
Print *
Print (Auto Del) Printer Parts > Control Panel >
iPF815
Menu Structure 9
719
 
						

							First Level
Second
Level Third Lev-
el Fourth
Level Fifth Level Sixth Level Seventh
Level Eighth Level System
Setup Output
Method
Save: Box XX Save and
Print
Off *
On Save:
Shared
Box
(*15
→P.721
) Off
On * Show Job
Log
(*15
→P.721
) Off
On *
Admin.
Menu
(*15 →P.721
) Change Password (*16 →P.721
)
Init.Admin.Pswd (*16 →P.721
) Test Print Status
Print
No
Yes Paper De-
tails
No
Yes Print Job
Log
No
Yes Menu
Map
No
Yes Nozzle
Check
No
Yes Color Pa-
lette
No
Yes Informa-
tion
System Info Error Log
1:xxxxxxxx-xxxx
2:xxxxxxxx-xxxx *1:  Available only if a roll is loaded.
*2:  Available only if 
ManageRemainRoll is On.
*3:  Available if  Feed Priority is Automatic or Print Length .
*4:  Not displayed if  IP Mode is Manual.
*5:  For information on the types of paper the printer supports, refer to the Paper Reference Guide.   (See "Types of
Paper.") →P.617
 The paper type setting in the printer driver and related software (as well as on the Control
Panel ) is updated when you install the printer driver from the User Software CD-ROM or if you change paper
information by using the Media Configuration Tool.See the  Media Configuration Tool →P.406
 or Media
Configuration Tool →P.539
.
Printer Parts > Control Panel >
Menu Structure
iPF8159
720
 
						

							*6:  Not displayed if 
NetWare is Off.
*7:  Not displayed if  Auto Detect is On.
*8:  Follows the setting in  Date Format.
*9:  Displayed if the Media Take-up Unit is attached.
*10:  Available after you have used  Advanced Adj. in Auto Head Adj.  once.
*11:  Available if: (a)  Take-up Reel is Enable, (b) roll paper is loaded, and (c) you have not executed  Auto Feed
for the loaded roll.
*12:  Not displayed if  IP Mode is Automatic.
*13:  Follows the setting in  Length Unit.
*14:  Leading edge  is not available as a setting option in the  Paper Detailed Settings dialog box of the printer driv-
er.
*15:  Viewing and configuration is possible for administrators, and only viewing for other users.
*16:  Viewing and configuration is possible for administrators only.
*17:  Default setting for the time to enter the power save mode/Sleep mode is recommended. Caution
• Only the following menus are displayed during printing.
Choose this menu to display  Head Cleaning, Fine Band Adj., and Information.
Choose this menu to display  Job Management.Submenus
Each time you press the 
Information button on the Control Panel, printer information is displayed in the following order.
• The remaining Maintenance Cartridge capacity and ink levels •
Information on the loaded paper Printer Parts > Control Panel >
iPF815
Menu Structure 9
721
 
						

							•
Printer information •
HP-GL/2 settings information For details on submenu screens, 
see "Submenu Display." →P.735
Main menu during printing
The structure of the main menu during printing is as follows.
For instructions on menu operations, 
see "Main Menu Operations." →P.705
For details on menu items available during printing,  see "Main Menu Settings (During Printing)." →P.734
First Level Second Level Third Level Fourth Level
Menu Durng Prtng Head Cleaning *
Head Cleaning A *
Head Cleaning B
Fine Band Adj. From –5 to 5 Information System Info
Error Log
1:xxxxxxxx-xxxx
2:xxxxxxxx-xxxxMain Menu Settings
Main menu items are described in the following tables.
For instructions on selecting or setting menu items, 
see "Main Menu Operations ." →P.705
.
For details on menu levels and values,  see "Menu Structure." →P.709
Setting Item
Description, Instructions
Paper Cutting This command is available only if a roll is loaded.
Choose Yes to cut the roll at the current position. However, if paper cannot be advanced
to the cut position, it will not be cut. In this case, manually advance the roll before cutting
it.  (See "Feeding Roll Paper Manually .") →P.638
Rep. Ink Tank When replacing ink tanks, choose  Yes and follow the instructions on the screen.   (See
"Replacing Ink Tanks .") →P.803Printer Parts > Control Panel >
Main Menu Settings
iPF8159
722
 
						

							Setting Item
Description, Instructions
Head Cleaning Clean the Printhead.  (See "Cleaning the Printhead .") →P.819
Choose Head Cleaning A if printing is faint, oddly colored, or contains foreign substan-
ces.
Choose Head Cleaning B if no ink is printed at all, or if printing is not improved by
Head Cleaning A.
Auto Feed This command is available only if  Take-up Reel is set to Enable. Choose Yes to ad-
vance roll paper automatically on the Rewind Spool, up to the fastening position.
Take-up Reel Choose Enable to use the Media Take-up Unit.
Paper Menu Specify the type and size of paper.   (See "  Paper Menu .") →P.724
Paper Details Specify detailed paper-related settings, including the ink drying time and borderless print-
ing options.  (See " Paper Details .") →P.724
Job Management Manage print jobs on the printer's hard disk.   (See " Job Management .") →P.726
GL2 Settings Specify settings for HP-GL/2 printing.   (See " GL2 Settings .") →P.727
Adjust Printer Adjust the Printhead alignment or amount of feed by printing a test pattern.   (See " Adjust
Printer .") →P.729
Interface Setup Configure the EOP timer and network settings.   (See " Interface Setup .") →P.730
Maintenance Access maintenance settings when replacing the Printhead or preparing to move the print-
er.  (See " Maintenance .") →P.731
System Setup Specify the printer system settings, including the date format and display language.   (See
"  

System Setup .") →P.732
Admin. Menu
Change PasswordBy setting a password, you can restrict menu display and
configuration as follows. You can input between 0 and
9999999.
• Viewing 

and  configuration  by  administrators
only
IP Setting
Return Defaults
Change Password
Init.Admin.Pswd
• Viewing  and  configuration  by  administrators,
and only viewing by other users
Interface  Setup  settings  (except  IP  Setting, Return
Defaults )
Time Zone
Date Format
Date & Time
Reset PaprSetngs
High Speed
Secure High Spd.
Secure
Save: Shared Box
Show Job Log
Admin. Menu
Init.Admin.Pswd Choose OK to restore the Admin. Menu password to the
default values.
Test Print Choose Status Print to print information about the printer. Printer Parts 
> Control Panel >
iPF815
Main Menu Settings 9
723
 
						

							Setting Item
Description, Instructions
Test Print Choose Paper Details to print the paper settings as specified in  Paper Details.
Choose Print Job Log to print a record of print jobs, including the paper type and size,
amount of ink used, and so on. (Information on ink consumption is general, not specific
in nature.)
Choose Menu Map to print a list of the main menu options.
Choose Nozzle Check to print a test pattern for checking the nozzles.
Select  Color Palette to print the GL2 color palette.
Information Displays printer information and an error log.   (See " Information .") →P.734
Paper Menu
Setting Item
Description, Instructions
Cut Sheet Type (*1 →P.724
) Choose the type of sheets.
 (See "Selecting the Paper Type (Sheet) .") →P.650
Roll Media Type ( *1 →P.724
) Choose the type of roll.
 (See "Selecting the Paper Type (Roll) .") →P.632
Roll Length Set Displayed if ManageRemainRoll is On.
If a barcode is not printed on rolls, specify the roll length.
The roll length is displayed in meters or feet, depending
on the setting in  Length Unit.
ManageRemainRoll Choose On to print a barcode at the end of a roll before
you remove it. The printed barcode can be used in manag-
ing the amount of roll paper left. Choose Off if you prefer
not to print the barcode.  (See "Keeping Track of the Amount of Roll Paper
Left.") →P.639
*1:  For information on the types of paper the printer supports, refer to the Paper Reference Guide. 
 (See "Types of
Paper.") →P.617
 The types of paper indicated in the printer driver and related software (as well as on the
Control Panel ) are updated when you install the printer driver from the User Software CD-ROM or if you up-
date paper information by using the Media Configuration Tool. See  Media Configuration Tool →P.406
 or
Media Configuration Tool →P.539
. Paper Details
Setting Item
Description, Instructions(The type of paper is dis-
played here.)
(*1
→P.726
) Roll DryingTime
Specify the time to wait for the ink to dry for each sheet.
Scan Wait Time Specify the time to wait for the ink to dry between each
scan (after the printhead finishes moving in one direction),
in consideration of how quickly the ink dries. Also specify
the applicable area for the ink drying time. Select  Entire
area to apply the ink drying time after each scan until the
document is fully printed. Select  Leading edge to apply
the ink drying time after each scan only in the area 110–
160 mm from the leading edge. (The applicable length
varies depending on the  Print Quality setting.) Note that
printing will take longer if you specify the  Scan Wait
Time setting. In particular, when  Leading edge is selec-
ted, colors may be uneven in the boundary between the
areas with and without a drying time. Printer Parts > Control Panel >
Main Menu Settings
iPF8159
724