Canon printer PIXMA MG3620 User Manual

							Safety
Safety Precautions
Regulatory Information
201 
						

							Safety PrecautionsChoosing a location
						

							Regulatory InformationFor models containing lithium battery
						

							Users in Canada
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the
following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and
operated keeping the radiator at least 20cm or more away from person's body (excluding extremities: hands, wrists, feet and ankles).
Pour les usagers rpsidant au Canada
Le prpsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorispe aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage
radioplectrique subi, mrme si le brouillage est susceptible d'en compromettre le fonctionnement.
Cet pquipement est conforme aux limites d'exposition aux rayonnements pnoncpes pour un
environnement non contr{lp et respecte les rqgles d'exposition aux frpquences radioplectriques (RF)
CNR-102 de l'IC. Cet pquipement doit rtre installp et utilisp en gardant une distance de 20 cm ou plus
entre le dispositif rayonnant et le corps (j l'exception des extrpmitps : mains, poignets, pieds et chevilles).
Only for European Union and EEA (Norway, Iceland and Liechtenstein)
This symbol indicates that this product is not to be disposed of with your household waste, according to
the WEEE Directive (2012/19/EU) and national legislation. This product should be handed over to a designated collection point, e.g., on an authorized one-for-one basis when you buy a new similar product
or to an authorized collection site for recycling waste electrical and electronic equipment (EEE). Improper
handling of this type of waste could have a possible negative impact on the environment and human
health due to potentially hazardous substances that are generally associated with EEE. At the same time,
your cooperation in the correct disposal of this product will contribute to the effective usage of natural
resources. For more information about where you can drop off your waste equipment for recycling, please
contact your local city office, waste authority, approved WEEE scheme or your household waste disposal
service. For more information regarding return and recycling of WEEE products, please visit www.canon-
europe.com/weee.
Korisnici u Srbiji
Ovaj simbol ozna
						

							vrstom otpada mo
						

							Main Components and Their Use
Main Components
Power Supply
206 
						

							Main Components
Front View
Rear View
Inside View
Operation Panel
207 
						

							Front View
(1) paper output supportExtend to support ejected paper.
(2) paper output tray Printed paper is ejected.
(3) paper output cover Open to replace the FINE cartridge or remove jammed paper inside the machine.
(4) document cover Open to load an original on the platen glass.
(5) paper guides Align with both sides of the paper stack.
(6) front tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
Loading Envelopes
(7) front cover Open to load paper in the front tray.
(8) paper support Extend to load paper in the front tray.
(9) output tray extension Open to support ejected paper.
208 
						

							(10) operation panelUse to change the settings of the machine or to operate it.
Operation Panel
(11) platen glass Load an original here.
209 
						

							Rear View
(1) transport unitOpen when removing jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) USB port Plug in the USB cable to connect the machine with a computer.
Important