Canon printer PIXMA MG3620 User Manual

							2.Key Length:
Select either  64bit or 128bit .3.
Key Format:
Select either  ASCII or Hex .
4.
Key ID:
Select the Key ID (index) set to the wireless router.
5.
Authentication:
Select the authentication method to authenticate the printer's access to the wireless router. Normally, select  Auto. If you want to specify the method manually, select  Open System or
Shared Key  according to the setting of the wireless router.
7.
Click OK.
Important

						

							Changing WPA/WPA2 Detailed Settings
Note

						

							8.
Enter passphrase and click Next>.
Enter the passphrase set to the wireless router. The passphrase should be a string of 8 to 63
alphanumeric characters or a 64-digit hexadecimal value.
If you do not know the wireless router passphrase, refer to the instruction manual provided with the
wireless router or contact its manufacturer.
The dynamic encryption method is selected from either TKIP (basic encryption) or AES (secure
encryption) automatically.
Important

						

							Important

						

							Changing Settings in Wired LAN Sheet
Note

						

							Changing Settings in Admin Password Sheet
Note

						

							Monitoring Wireless Network Status
Note

						

							6.
Check status.
When the measurement is complete, the status is displayed.
When  is displayed in  Connection performance between the printer and the wireless router: , the
printer can communicate with the wireless router. Otherwise, refer to displayed comments and the
following to improve the status of communication link, and click  Remeasurement.

						

							The wireless connection may use the same frequency band as microwave ovens and othersources of radio interference. Try to keep the printer and the wireless router away from such
sources.
						

							Changing Settings in Direct Connection
Note