Canon printer PIXMA MG3620 User Manual

							1704Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
851 
						

							1705Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
852 
						

							1712Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
853 
						

							1713Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
854 
						

							1714Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
855 
						

							1715Cause
Ink absorber is almost full.
What to Do
Press the machine's  Black or Color  button to continue printing. Contact your nearest Canon service
center to request a repair.
856 
						

							1890Cause
Protective material or tape may still be attached to FINE cartridge holder.
What to Do Open the paper output cover and make sure the protective material and tape have been removed from
the FINE cartridge holder.
If the protective material or tape is still there, remove it and close the paper output cover.
If this does not solve the problem, contact your nearest Canon service center to request a repair.
857 
						

							2100Cause
Paper size in print settings and size of loaded paper do not match.
What to Do Check the print settings and the loaded paper, load paper of the correct size, and then press the
machine's  Black or Color  button.
To cancel printing, press the machine's  Stop button.
858 
						

							2101Cause
Paper size in print settings and size of loaded paper do not match.
What to Do Check the print settings and the loaded paper, load paper of the correct size, and then press the
machine's  Black or Color  button.
To cancel printing, press the machine's  Stop button.
859 
						

							2102Cause
Machine has detected that paper has been fed aligned to one side.
What to DoLoad the paper into the center of the front tray and slide the paper guides to align with the both edges of
the paper stack.
Press the machine's  Black or Color  button.
860