Canon printer PIXMA MG3620 User Manual

							To open the printer driver setup window, see How to Open the Printer Driver Setup Window.

						

							2.Open printer driver setup window.
How to Open the Printer Driver Setup Window
3.
Click Maintenance  tab and Custom Settings .
4.
Drag Ink Drying Wait Time  slide bar to set the wait time and click  OK.
5.
Check message and click  OK.

						

							Back of Paper Is Smudged
Check1 Check paper and print quality settings.
Print Results Are Unsatisfactory
Check2  Perform bottom plate cleaning to clean inside of machine.
Cleaning the Inside of the Machine (Bottom Plate Cleaning)
Note

						

							Vertical Line Next to Image
Check Is loaded paper size correct?
If the loaded paper is larger than the size you specified, a vertical line may appear in the margin.
Set the paper size to match the loaded paper.
Print Results Are Unsatisfactory
Note

						

							Uneven or Streaked Colors
 Uneven Colors
 Streaked Colors
Check1 Check paper and print quality settings.
Print Results Are Unsatisfactory
Check2 Print nozzle check pattern and perform any necessary maintenance operations
such as print head cleaning.
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see 
If Printing
Is Faint or Uneven .

						

							If the problem is not resolved after performing print head deep cleaning, turn off the machine and performprint head deep cleaning again 24 hours later.
						

							No Ink Comes Out
Check1 When a FINE cartridge runs out of ink, replace it with a new one.
Check2  Is FINE cartridge installed properly?
If the FINE cartridge is not installed securely, ink may not be ejected correctly.
Open the paper output cover and the head cover opens.
Push up the ink cartridge lock lever to make sure the FINE cartridge is installed properly.
After making sure the FINE cartridge is installed properly, close the paper output cover.
If the problem is not resolved, remove the FINE cartridges and install them again.
For more on installing the FINE cartridges, see 
Replacing a FINE Cartridge .
Check3
 Are the print head nozzles clogged?
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles. For details on printing the nozzle check pattern, print head cleaning, and print head deep cleaning, see 
If Printing
Is Faint or Uneven .

						

							Paper Does Not Feed Properly/"No Paper" Error
Check1 Make sure paper is loaded.
Loading Paper
Check2 When loading paper, consider the following.