Canon printer PIXMA MG3620 User Manual

							This menu is available when No Driver is displayed for the selected printer. Associating a port
with the printer enables you to use it.
Maintenance... Displays the  Maintenance  screen to return the network settings of the printer to factory default
and to mount the card slot as the network drive.
Maintenance Screen
Set up printer's direct connection... You can change or check the direct connection (access point mode) settings.
Changing Settings in Direct Connection
4.
Help  menu
Instructions Displays this guide.
About Displays the version of IJ Network Tool.
292 
						

							Status ScreenYou can check the printer status and connection performance.
To display the  Status screen, select  Status from the  View menu.
Note

						

							Connection Performance Measurement Screen
Note

						

							1.Connection performance between the printer and the wireless router:
A mark indicates the result of the connection performance measurement between the printer and the wireless router.
: Good connection performance
: Unstable connection performance
: Cannot connect
: Measurement is canceled, or cannot measure
2.
Remeasurement
Measures the connection performance again.
Note

						

							Maintenance ScreenDisplays to perform  Setting Initialization  and Network Setup of the Card Slot .
To display the  Maintenance screen, select  Maintenance...  on the Settings  menu.1.
Setting Initialization
Returns all the network settings of the printer to factory default. Click  Initialize to display the  Initialize
Settings  screen and click  Yes to initialize the network settings of the printer. Do not turn off the printer
during initialization. Click  OK when initialization is complete.
Performing initialization when connected over wireless LAN will break the connection, so use the Setup CD-ROM or follow the instructions on the Canon website to perform setup.
2.
Network Setup of the Card Slot
Note

						

							Network Setup of the Card Slot Screen
Note

						

							1.
Skip
Completes the setup without mapping a network drive to the card slot.
2.
Retry
Returns to  Network Setup of the Card Slot  screen and re-executes the network drive mapping.
3.
Cancel
Cancels the card slot setup. When IJ Network Tool is running over LAN, the  Cancel button is
displayed grayed out and cannot be clicked.
298 
						

							Associate Port ScreenAllows you to associate a created port with a printer driver.
Select the printer for which you want to change the association and click  OK.
Note

						

							Network Information ScreenDisplays the network information that is set for the printers and the computers.
To display the  Network Information  screen, select Network Information  from the View menu.1.
OK
Returns to the  Canon IJ Network Tool  screen.
2.
Copy All Information
All network information displayed is copied to the clipboard.
300