Canon printer PIXMA MG3620 User Manual

							Connecting to Another Computer via LAN/Changing from USB toLAN Connection
For Windows:
For Mac OS:
For Windows:To add a computer to connect to the machine on a LAN or to change from USB to LAN connection,
perform setup using the Setup CD-ROM or follow the instructions on the Canon website.
For Mac OS:
To connect an additional computer to the machine via LAN, or to change from USB to LAN connection,
follow the instructions on the Canon website.
241 
						

							Printing Network SettingsUse the operation panel to print the machine's current network settings.
Important

						

							Default GatewayDefault gatewayXXX.XXX.XXX.XXXTCP/IPv6TCP/IPv6Enable/DisableIP Address *2IP addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet prefix lengthXXXDefault Gateway *2Default gatewayXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPsec *3IPsec settingActiveSecurity Protocol *3Security methodESP/ESP & AH/AHAccess Point ModeAccess point modeEnable/DisableConnectionConnection statusActive/InactiveSSIDSSIDAccess Point Mode SSIDPasswordPasswordPassword of the access point mode (8 to 10
alphanumeric characters)ChannelChannel3EncryptionEncryption methodAESAuthenticationAuthentication methodWPA2-PSKTCP/IPv4TCP/IPv4EnableIP AddressIP addressXXX.XXX.XXX.XXXSubnet MaskSubnet maskXXX.XXX.XXX.XXXDefault GatewayDefault gatewayXXX.XXX.XXX.XXXTCP/IPv6TCP/IPv6Enable/DisableIP Address *2IP addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet prefix lengthXXXDefault Gateway *2Default gatewayXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPsec *3IPsec settingActiveSecurity Protocol *3Security method
						

							LPD PrintingLPD printing settingEnable/DisableBonjourBonjour settingEnable/DisableBonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumeric
characters)PictBridge Commun.PictBridge communicationEnable/DisableDNS ServerObtain DNS server address
automaticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy server settingEnable/DisableProxy AddressProxy addressXXXXXXXXXXXXXXXXXXXXProxy PortProxy port specification1 to 65535
("XX" represents alphanumeric characters.)
*1 Channel may range from 1 to 11 depending on country or region of purchase.
*2 Network status is only printed when IPv6 is enabled.
*3 Network status is only printed when IPv6 and IPsec settings are enabled.
244 
						

							Network Communication (Windows)
Checking and Changing Network Settings
IJ Network Tool (Network Connection)
IJ Network Tool (Other Screens)
Network Communication Tips
245 
						

							Checking and Changing Network Settings
IJ Network Tool
Changing Settings in Wireless LAN Sheet
Changing WEP Detailed Settings
Changing WPA/WPA2 Detailed Settings
Changing Settings in Wired LAN Sheet
Changing Settings in Admin Password Sheet
Monitoring Wireless Network Status
Changing Settings in Direct Connection
Initializing Network Settings
Viewing Modified Settings
246 
						

							IJ Network ToolIJ Network Tool is a utility that enables you to display and modify the machine network settings. It is installed
when the machine is set up.
Important

						

							Changing Settings in Wireless LAN SheetTo change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying
the settings.
Note

						

							Note
						

							Changing WEP Detailed Settings
Note