Home > Canon > Printer > Canon printer PIXMA MG3620 User Manual

Canon printer PIXMA MG3620 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG3620 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 910
    							Rotate 180 degreesPrints the document by rotating it 180 degrees against the paper feed direction.
    The width of print area and the amount of extension that are configured in other application software will
    be reversed vertically and horizontally.
    Printer Paper Size Selects the size of paper actually loaded into the printer.
    The default setting is  Same as Page Size to perform normal-sized printing.
    You can select a printer paper size when you select  Fit-to-Page, Scaled , Page Layout , Tiling/Poster ,
    or  Booklet  for Page Layout .
    If you select a paper size that is smaller than the  Page Size, the document size will be reduced. If you
    select a paper size that is larger, the document size will be enlarged.
    Also if you select  Custom..., the 
    Custom Paper Size dialog box  opens and allows you to specify any
    vertical and horizontal dimensions for the paper size.
    Page Layout Selects the size of the document you want to print and the type of printing.Normal-size This is the normal printing method. Select this when you do not specify any page layout.
    Automatically reduce large document that the printer cannot output If the printer cannot print the paper size of a document, the printer can automatically reduce
    the size when it prints the document.
    Check this check box to reduce the size when printing the document.
    Borderless Chooses whether you are printing on a full page without any page margins or printing with page
    margins.
    In borderless printing, originals are enlarged to extend slightly off the paper. Thus, printing can be
    performed without any margins (border).
    Use  Amount of Extension  to adjust how much of the document extends off the paper during
    borderless printing.
    Amount of Extension Adjusts how much of the document extends off the paper during borderless printing.
    Moving the slider to the right increases the amount of extension and allows you to perform
    borderless printing with no problems.
    Moving the slider to the left reduces the amount of extension and expands the range of the document to print.
    Fit-to-Page This function enables you to automatically enlarge or reduce documents to fit to the paper size
    loaded in the printer without changing the paper size you specified in your application software.
    Scaled Documents can be enlarged or reduced to be printed.Specify the size in  Printer Paper Size , or enter the scaling ratio in the  Scaling box.
    Scaling Specifies an enlargement or reduction ratio for the document you want to print.
    Page Layout Multiple pages of document can be printed on one sheet of paper.Specify... Opens the 
    Page Layout Printing dialog box .
    Click this button to set details on page layout printing.
    441 
    						
    							Tiling/PosterThis function enables you to enlarge the image data and divide the enlarged data into severalpages to be printed. You can also glue together these sheets of paper to create large printed
    matter, such as a poster.
    Specify... Opens the 
    Tiling/Poster Printing dialog box .
    Click this button to set details on tiling/poster printing.
    Booklet The booklet printing function allows you to print data for a booklet. Data is printed on both sides of
    the paper. This type of printing ensures that pages can be collated properly, in page number order,
    when the printed sheets are folded and stapled at the center.
    Specify... Opens the 
    Booklet Printing dialog box .
    Click this button to set details on booklet printing.
    Duplex Printing Selects whether to print the document automatically on both sides or one side of a sheet of paper.
    Check this check box to print the document on both sides.
    This function can be used only when  Plain Paper is selected for  Media Type and one of Normal-size ,
    Fit-to-Page , Scaled , or Page Layout  is selected.
    Automatic Selects whether duplex printing is to be performed automatically or manually.
    This check box will be enabled if  Booklet is selected from the  Page Layout list or the Duplex
    Printing  check box is checked.
    To perform duplex printing automatically, check this check box.
    To perform duplex printing manually, uncheck this check box.
    Print Area Setup... Opens the 
    Print Area Setup dialog box  in which you can configure the print area for automatic
    duplex printing.
    This button will be enabled if automatic duplex printing is set when  Borderless is not selected.
    Stapling Side Selects the stapling margin position.
    The printer analyzes the  Orientation and Page Layout  settings, and automatically selects the best
    stapling margin position. Check  Stapling Side, and select from the list to change it.
    Specify Margin... Opens the 
    Specify Margin dialog box .
    You can specify the width of the margin.
    Copies Specifies the number of copies you want to print. You can specify a value from 1 to 999.
    Important
    
    						
    							CollateCheck this check box to group together the pages of each copy when you want to print multiple copies.
    Uncheck this check box when you want to print with all pages of the same page number grouped
    together.
    Important
    
    						
    							Page BorderPrints a page border line around each document page.
    Check this check box to print the page border line.
    Tiling/Poster Printing dialog box
    This dialog box allows you to select the size of the image to be printed. You can also make settings for cut
    lines and paste markers which are convenient for pasting together the pages into a poster.
    The settings specified in this dialog box can be confirmed in the settings preview on the printer driver.
    Preview Icon Shows the settings of the  Tiling/Poster Printing dialog box.
    You can check what the print result will look like.
    Image Divisions Select the number of divisions (vertical x horizontal).
    As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a
    larger poster.
    Print "Cut/Paste" in margins Specifies whether to print the words "Cut" and "Paste" in the margins. These words serve as
    guidelines for pasting together the pages into a poster.
    Check this check box to print the words.
    Note
    
    						
    							Insert blank pageSelects whether to print the document on one side or both sides of the booklet.Check this check box to print the document on one side of the booklet and select the side to be left
    blank from the list.
    Margin Specifies the width of the stapling margin.
    The specified width becomes the stapling margin from the center of the sheet.
    Page Border Prints a page border line around each document page.Check this check box to print the page border line.
    Print Area Setup dialog box When you perform duplex printing, the print area of the document becomes slightly narrower than usual.
    Therefore when a document that has small margins is printed, the document may not fit on one page.
    This dialog box allows you to set whether the page is to be reduced when printed so that the document
    fits in one page.
    Use normal-size printing Prints the document pages without reducing them. This is the default setting.
    Use reduced printing Slightly reduces each document page so that it fits on one sheet of paper during printing.
    Select this setting when using automatic duplex printing to print a document with small margins.
    Specify Margin dialog box This dialog box allows you to specify the margin width for the side to be stapled. If a document does not fit
    on one page, the document is reduced when printed.
    Margin Specifies the width of the stapling margin.
    The width of the side specified by  Stapling Side becomes the stapling margin.
    Print Options dialog box Makes changes to print data that is sent to the printer.
    Depending on the type of printer driver you are using and the environment, this function may not be
    available.
    Disable ICM required from the application software Disables the ICM function required from the application software.When an application software uses Windows ICM to print data, unexpected colors may be produced
    or the printing speed may decrease. If these problems occur, checking this check box may resolve
    the problems.
    Important
    
    						
    							Note
    						
    							Print semitransparent stampSets how the stamp is to be printed over the document.
    Check the  Stamp check box to enable this.
    Check this check box to print a semi-transparent stamp over the printed document page. Uncheck this check box to print the stamp over the document data. The printed data may be hidden
    behind the stamp.
    Note
    
    						
    							TrueType FontSelects the font for the stamp text string.
    Style Selects the font style for the stamp text string.
    Size Selects the font size for the stamp text string.
    Outline Selects a frame that encloses the stamp text string.If a large font size is selected for  Size, characters may extend outside of the stamp border.
    Color/Select Color... Shows the current color for the stamp.
    To select a different color, click  Select Color... to open the Color dialog box, and select or create a
    color you wish to use as a stamp.
    When  Stamp Type  is Bitmap
    File Specifies the name of the bitmap file to be used as the stamp.
    Select File... Opens the dialog box to open a file.
    Click this button to select a bitmap file to be used as a stamp.
    Size Adjusts the size of the bitmap file to be used as a stamp.
    Moving the slider to the right increases the size, moving the slider to the left decreases the size.
    Transparent white area Specifies whether to make white-filled areas of the bitmap transparent.
    Check this check box to make white-filled areas of the bitmap transparent.
    Note
    
    						
    All Canon manuals Comments (1)

    Related Manuals for Canon printer PIXMA MG3620 User Manual