GE Logiq P5 User Manual

							OB Table Editor
LOGIQ 5 Basic User Manual 9-85
Direction 2300002-100 Rev. 2
O B  Ta b l e  Te m p l a t e s
Tool Type:
• Distance: 2D Caliper
•  Circumference: 2D Ellipse, 2D Trace, 2D Caliper
Te m p l a t e  1
Table 9-4: Template 1 (based on Hadlock)
Template 1: SD Range Table
Fetal Age Table Table Format MEAS MEAN SD
Table Unit mm Week Week
Table Range 1SD
Graph Range 1SD
Measurement Result Value [cm]
GA [#w#d]
Min [#w#d]
Max [#w#d]
Fetal Growth Table Table Format AGE MEAN SD
Table Unit Week mm Week
Others are same as above 
						

							OB/GYN
9-86 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Te m p l a t e  2
Te m p l a t e  3
Table 9-5: Template 2 (based on Tokyo)
Template 2: SD Range Table
Fetal Age Table Table Format MEAS MEAN SD
Table Unit mm Day Day
Table Range 1SD
Graph Range 1SD
Measurement Result Value [cm]
GA [#w#d]
SD: day(+/-)
Fetal Growth Table Table Format AGE MEAN SD
Table Unit Day mm Day
Others are same as above
Table 9-6: Template 3 (based on Osaka)
Template 3: SD Table
Fetal Age Table Table Format MEAS MEAN SD
Table Unit mm Day mm
Table Range 1SD
Graph Range 1SD
Measurement Result Value [cm]
GA [#w#d]
SD: sd=(mv-pv)/sd
Fetal Growth Table Table Format AGE MEAN SD
Table Unit Day mm Day
Others are same as above 
						

							OB Table Editor
LOGIQ 5 Basic User Manual 9-87
Direction 2300002-100 Rev. 2
Te m p l a t e  4
Table 9-7: Template 4 (based on several European tables)
Template 4: 5%-95% Table
Fetal Age Table Table Format MEAS MEAN SD
Table Unit mm WeekDay mm
Table Range 5%:95%
Graph Range 5%:95%
Measurement Result Value [cm]
GA [#w#d]
GP [%]
GP is calculated by Fetal Growth Table. If you did 
not edit Growth Table, GP is not calculated by the 
system,
Fetal Growth Table Table Format AGE MEAN SD
Table Unit WeekDay mm Day
Table Range 5%:95%
Graph Range 5%:95% 
						

							OB/GYN
9-88 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Te m p l a t e  5
Table 9-8: Template 5 (based on several European tables)
Template 5: 5% - 95% Table
Fetal Age Table Table Format MEAS MEAN SD
Table Unit mm WeekDay mm
Table Range 1SD
Graph Range 5%:95%
Measurement Result Value [cm]
GA [#w#d]
GP [%]
GP is calculated by Fetal Growth Table. If you did not 
edit Growth Table, GP is not calculated by the system,
Fetal Growth Table Table Format AGE MEAN MAX
Table Unit WeekDay mm mm
Table Range 1SD
Graph Range 5%:95% 
						

							OB Table Editor
LOGIQ 5 Basic User Manual 9-89
Direction 2300002-100 Rev. 2
Te m p l a t e  6
Table 9-9: Template 6 (based on several European tables)
Template 6: 10% - 90% Table
Fetal Age Table Table Format MEAS MIN MEAN SD
Table Unit mm WeekDay WeekDay WeekDay
Table Range 10%-90%
Graph Range 10%-90%
Measurement Result Value [cm]
GA [#w#d]
GP [%]
GP is calculated by Fetal Growth Table. If you did not edit Growth 
Table, GP is not calculated by the system,
Fetal Growth Table Table Format AGE MIN MEAN SD
Table Unit WeekDay mm mm mm
Table Range 10%-90%
Graph Range 10%-90% 
						

							OB/GYN
9-90 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Te m p l a t e  7
Table 9-10: Template 7 (Based on several european tables)
Template 7: 10% - 90% Table
Fetal Age Table Table Format MEAS MEAN SD
Table Unit mm WeekDay mm
Table Range 1SD
Graph Range 10%:90%
Measurement Result Value [cm]
GA [#w#d]
GP [%]
GP is calculated by Fetal Growth Table. If you did not 
edit Growth Table, GP is not calculated by the system,
Fetal Growth Table Table Format AGE MEAN MAX
Table Unit WeekDay mm mm
Table Range 1SD
Graph Range 10%:90% 
						

							OB Table Editor
LOGIQ 5 Basic User Manual 9-91
Direction 2300002-100 Rev. 2
OB Table Edit Menu
The data you enter in the OB Table Edit Menu depends on 
whether the table type is Fetal Age or Fetal Growth.
Fetal Age Table
If you are creating or editing a Fetal Age table, the OB Table Edit 
Menu is as follows:
 Figure 9-28. OB Table Edit Menu: Fetal Age Table 
						

							OB/GYN
9-92 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Fetal Age Table (continued)
Complete the field1.  Input value to Min, Max and Interval of the Parameters field. 
The system automatically fills in the MEAS column.
Input value to the columns of MEAN and SD.
NOTE:  To move between the fields in the table, use the up, down, 
left, and right arrow keys.
NOTE:  You must enter a minimum of two rows of data. Any lines 
with a blank cell are not saved. 
To save the Table Data, move the Trackball to Exit to Save 
and press Set. If you want cancel this table, move the 
Trackball to Cancel and press Set. 
						

							OB Table Editor
LOGIQ 5 Basic User Manual 9-93
Direction 2300002-100 Rev. 2
Fetal Growth Table
If you are creating or editing a Fetal Growth table, the OB Table 
Edit Menu is as follows:
 Figure 9-29. OB Table Edit Menu: Fetal Growth Table 
Complete the field1.  Input value to the required columns.
NOTE:  To move between the fields in the table, use the up, down, 
left, and right arrow keys.
NOTE:  You must enter a minimum of two rows of data. Any lines 
with a blank cell are not saved. 
2.  To save the Table Data, move the Trackball to Exit to Save 
and press Set. If you want cancel this table, move the 
Trackball to Cancel and press Set.
After you complete the OB table, it is now available for the 
selected study. To use the measurement, you must assign it to a 
Touch Panel.   
						

							OB/GYN
9-94 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
GYN Measurements
Introduction
The Gynecology exam category includes the following three 
studies:
•  Generic. This study is common to all exam categories. See 
‘Generic Measurements’ for more information. 
•  General Gynecology. This study includes uterine, ovarian, 
ovarian follicle, and endometrium measurements.
•  OB/GYN Vessel. This study includes the following vessels: 
uterine, ovarian, umbilical, middle cerebral artery, aorta, 
placenta, and descending aorta.
NOTE:  The calculation formulas are listed in the Advanced Reference 
Manual.