GE Logiq P5 User Manual

							LOGIQ 5 Basic User Manual 16-1
Direction 2300002-100 Rev. 2
Chapter 16
Customizing Your System
Describes how to create system, user, and exam 
presets.   
						

							Customizing Your System
16-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Presets
Overview
Preset Menus provides the following functionality: 
• System presets
• Imaging presets
•  Annotation library presets
•  Body Pattern library presets
•  Application and User Defined presets
• Test patterns
• Connectivity Setup
•  Measurement and Analysis presets
•  System Administration presets
To access these functions, select the Utility tab on the Touch 
Panel.  
						

							Presets
LOGIQ 5 Basic User Manual 16-3
Direction 2300002-100 Rev. 2
Utility Touch Panel
You access preset controls via the Utility tab, located on the 
bottom left side of the Touch Panel. 
 Figure 16-1. Utility Touch Panel
To access, select the appropriate Touch Panel key: 
• System
• Imaging
• Annotations Libraries
•  Body Pattern Libraries
• Application
• Test Patterns
• Connectivity
• Measure
• Admin 
						

							Customizing Your System
16-4 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Utility Descriptions
The Utility screens allow you to perform the following tasks:
SystemView and update general system configuration settings, 
measurement and analysis settings, and video settings; backup 
and restore data and configuration files
ImagingView and update exam and imaging parameters
AnnotationsSet up annotation libraries by application
Body PatternsSet up body pattern libraries by application
ApplicationConfigure application-specific settings
Test PatternsHelps configure system settings. 
ConnectivityDefine connection and communication setup, including exam 
dataflow information
MeasureCustomize exam studies, create measurements, set up manual 
sequencing, and create OB Tables
NOTE:  The Measure screens allow you to customize exam studies, 
create measurements, set up auto sequencing, and create OB 
Ta b l e s .  
AdminPerform system administrator activities such as setting up user 
IDs and logon formats 
						

							System Presets
LOGIQ 5 Basic User Manual 16-5
Direction 2300002-100 Rev. 2
System Presets
Overview
System presets allows you to view or change the following 
parameters
• System – Location, Date/Time, Patient Info, Key Usage, 
and Utility configuration
• System Imaging – CINE Loop Store, Cardiac, Biopsy 
Guides, and Image Control and Display configuration
• M & A – Measurement, Cursor, and Results Window 
configuration
• Backup/Restore – Backup allows you to perform backup 
procedures for local patient, and image archives as well as 
system configuration. Restore enables you to retrieve data 
from a backup.
• Setup – Video Settings, VCR, Print and Store Options, and 
Setup configuration
• About – System software information
Changing system parameters
To change system parameters:
1.  On the Touch Panel, select Utility.
2.  On the Touch Panel, select System. 
The System screen is displayed. See the System screen in 
Figure 16-2.
3.  On the monitor display, move the Trackball to select the tab 
that has the information you want to change. 
4.  Select values for the parameters you want to change.
5.  To save the changes, select the Save button. Select Exit to 
return to scanning.  
						

							Customizing Your System
16-6 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
System/General Preset Menu
The System/General screen allows you to specify hospital name 
and system date and time.
 Figure 16-2. System/General Preset Menu 
Table 16-1: Location
Preset ParameterDescription
Hospital Type the institution’s name.
Department Type the institution’s department name. 
Language Select the appropriate language from the drop-
down list. 
Units Select metric or US units of measurement.
Regional Options Select to set up Russian/Greek keyboard.  
						

							System Presets
LOGIQ 5 Basic User Manual 16-7
Direction 2300002-100 Rev. 2
System/General Preset Menu (continued)
Table 16-2: Date and Time
Preset ParameterDescription
Time Format Select the time format: 12 Hr. AM/PM or 24 Hr.
Date Format Select the date format: US or Europe.
Default Century Select the default century for the system to use.
Date/Time Select to display the Date/Time Properties window, 
to specify the system date, time, time zone, and to 
auto adjust for daylight savings time. 
Table 16-3: Patient Information
Preset ParameterDescription
Anonymous patient When selected, no patient information is displayed 
on the scanning screen Title bar.
Title Bar Font Size 
(reboot)Select to display patient information in the title bar 
using a small, medium, or large font size. You need 
to reboot the system for this change to take effect.  
						

							Customizing Your System
16-8 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
System/General Preset Menu (continued)
Table 16-4: Key Usage
Preset ParameterDescription
CineRun Trackball 
controlSelect Frame by Frame or Loop Speed. Frame by 
Frame manually steps through CINE playback by 
using the Trackball. Loop Speed controls the speed 
of the CINE Loop playback. Roll the Trackball to the 
left to slow down playback; roll the Trackball right to 
speed up playback. The Loop Speed displays in the 
lower, right-hand corner of the screen. 
Swap set and 
program keySelect the functionality for the left Set key on the 
Front Panel: Pointer, Set, or Freeze.
Program Key 
MappingAllows you to program the left set key’s functionality 
(Pointer, Set, or Freeze). You need to reboot the 
system after reprogramming the Set and Select 
keys. 
Reverse Rotary You can change key direction for Focus Position, 
Depth, Steer, and Baseline. 
Trackball Field Engineer use only. Select to display the 
Mouse Properties window (faster, slower, snap-to 
default).
Table 16-5: Utility
Preset ParameterDescription
Prompt for Save on 
Cancel or ExitIf selected, the system prompts you to save data 
when you select cancel or exit without saving. 
						

							System Presets
LOGIQ 5 Basic User Manual 16-9
Direction 2300002-100 Rev. 2
Foreign Language Keyboard Setup (Non-Russian and Greek Languages)
To set up the keyboard for non-Russian/Greek languages: 
1.  In the Utility --> System --> General, set the Language as 
desired. 
2.  In the Utility --> System --> Regional Settings, set the Input 
Locale for International English. 
3.  Reboot the system. 
4.  To type foreign characters, press and hold down the Alt GR 
+ appropriate keyboard key. 
Keyboard Setup Procedure for Russian and Greek
1.  Press Utility -->System --> General --> Language and 
change the Language to RUS or GRK. Press Save. DO 
NOT reboot the system yet. 
 Figure 16-3. Change the System Language 
						

							Customizing Your System
16-10 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Keyboard Setup Procedure for Russian and Greek (continued)
2.  On the same Utility screen, select Regional Options.  
The Regional Options menu appears. Select Input Locales. 
The following menu appears. 
 Figure 16-4. Input Locales Menu