GE Logiq P5 User Manual

							System Administration
LOGIQ 5 Basic User Manual 16-121
Direction 2300002-100 Rev. 2
System Admin
The System Admin screen has information about any options 
implemented for the system.
 Figure 16-79. Administrative System Admin Preset Menu 
Table 16-66: System Administration
Preset ParameterDescription
Product The name of the product.
HW Number The hardware number of the product.
SW Option Key The software option key.
New To enter a new software option key, select New and 
then enter the software option key.
Delete To remove a software option key, select the key in 
the SW Option Key list, and then select Delete.
Options A list of the option name and status. 
						

							Customizing Your System
16-122 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2 
						

							LOGIQ 5 Basic User Manual 17-1
Direction 2300002-100 Rev. 2
Chapter 17
Probes and Biopsy
This chapter consists of the information of each probe 
and describes some special concerns, biopsy kits and 
accessories as well as basic procedures for attaching a 
bispsy guide to the different types of probes.  
						

							Probes and Biopsy
17-2 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Probe Overview
Ergonomics
Probes have been ergonomically designed to:
•  Handle and manipulate with ease
•  Connect to the system with one hand
•  Be lightweight and balanced
•  Have rounded edges and smooth surfaces.
Cables have been designed to:
•  Connect to system with appropriate cable length
•  Stand up to typical wear by cleaning and disinfectant 
agents, contact with approved gel, etc.
Cable handling
Take the following precautions with probe cables:
•  Keep free from wheels
•  Do not bend the cable acutely
•  Avoid crossing cables between probes. 
						

							Probe Overview
LOGIQ 5 Basic User Manual 17-3
Direction 2300002-100 Rev. 2
Probe orientation
Each probe is provided with an orientation marking (refer to 
Figure 17-1). This mark is used to identify the end of the probe 
corresponding to the side of the image having the orientation 
mark on the display.
 Figure 17-1. Orientation Marking on Probe
1. Orientation Mark
Labeling
Each probe is labeled with the following information:
•  Sellers name and manufacturer
• Operating frequency
•  GE part number
•  Probe serial number
•  Month and year of manufacture
•  Probe designation-provided on the probe grip and the top of 
the connector housing, so it is easily read when mounted on 
the system and is also automatically displayed on the 
screen when the probe is selected.
1 
						

							Probes and Biopsy
17-4 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Labeling (continued)
 Figure 17-2. Probe Adapter Label
 Figure 17-3. Probe Handle Labels
GEMS-Am   GEMS-E   GEMS-A
MANUFACTURED
e.g. SEPTEMBER 1993
Also found on 
Probe Connector
E8C
3Cb
*GEMS-E-Am   *GEMS-A   *JAPAN    *GEMS-E 
						

							Probe Overview
LOGIQ 5 Basic User Manual 17-5
Direction 2300002-100 Rev. 2
Labeling (continued)
 Figure 17-4. Probe Connector Labels
 Figure 17-5. Displayed Probe Information
1.  Probe Information Location
3Cb1
32
1
2
3
3Cb5CM7CE8C
GEMS-Am   GEMS-E   GEMS-A
MANUFACTURED
e.g. SEPTEMBER 1993Also found on 
Probe Connector
1 
						

							Probes and Biopsy
17-6 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
LOGIQ 5 Applications
Table 17-1: Probe Indications for Use
Probe 
Application
3C3.5C5CE8C7L10L12L3S8C
Abdomen X X X X X X X
Small Parts X X X X X X X
Periph. Vasc. X X X X
Obstetrics XXXX X
Gynecology XXXX X
Pediatrics X X X X X
Neonatal X X X
Urology XXXX X X
Surgery X
Cardiac
Endocavity
Transcranial
Biopsy XXXX XX X 
						

							Probe Overview
LOGIQ 5 Basic User Manual 17-7
Direction 2300002-100 Rev. 2
LOGIQ 5 Applications (continued)
Table 17-2: Probe Indications for Use (continued)
Probe 
Application
P2DP6D
Abdomen
Small Parts
Periph. Vasc. X
Obstetrics
Gynecology
Pediatrics
Neonatal
Urology 
Surgery
Cardiac X
Endocavity
Transcranial
Biopsy 
						

							Probes and Biopsy
17-8 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
LOGIQ 5 Features
Table 17-3: Probe Features
Probe 
Application
3C3.5C5CE8C7L10L12L3S8C
Coded 
HarmonicsXX XXX X X
B-Flow X
Coded Contrast X
LOGIQ ViewXXXX XXX X X
Virtual Convex X X X
Easy 3D XXXX XXX X X
Advanced 3D  XXXX XXX X X
Anatomical MXXXX XXX X X
M Color Flow X X X
Tru Access XXXX XXX X X
Biopsy XXXX XXX
Non-Imaging 
CW