GE Logiq P5 User Manual

							Configuring Connectivity
LOGIQ 5 Basic User Manual 16-101
Direction 2300002-100 Rev. 2
Adding a dataflow
1.  In the Dataflow section, select Add.
The system adds a new dataflow, with a default name such 
as Workflow05.
2.  To change the name of the dataflow, move the Trackball to 
the Name field, press Set, and type a new name.
The system displays a message to confirm that you want to 
change the name.
3. Select Yes.
Removing a dataflow or service
1.  Select the dataflow or service.
2.  Select the appropriate Remove button.
The system displays a warning message to confirm that you 
want to remove the dataflow or service.
3. Select OK. 
						

							Customizing Your System
16-102 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Dataflow (continued)
The following table lists dataflows that are pre-configured with 
the ultrasound system.
Table 16-59: Dataflows
DataflowDescription
No Archive Performs an exam without storing the data to the 
archive.
Local Archive - Int. 
HDLocal archive internal hard driveUses the local 
database for patient archiving.Stores images to the 
internal hard drive.
Local Archive - Int. 
HD/MODLocal archive internal hard drive and Magneto-
Optical DiskUses the local database for patient 
archiving.Stores images to the internal hard drive 
(raw data) and to a MOD as DICOM Media.NOTE: 
LocArch-HD/MOD enables only “pure” DICOM to 
both destinations, or both DICOM and raw data to 
both destinations.
Remote Archive - 
Remote HDRemote archive remote hard driveUses a remote 
database (either on EchoPAC workstation or on 
EchoServer) for patient archiving.Stores images to 
a network image volume (either internal HD on 
EchoPAC workstation or EchoServer volume).
Remote Archive - 
MODRemote archive Magneto-Optical DiskUses a 
remote database (either on EchoPAC workstation 
or on EchoServer) for patient archiving.Stores 
images to a MOD.
Worklist/Local 
Archive - DICOM 
Server/Int. HDModality Worklist local archive DICOM server and 
local hard driveSearches the DICOM Modality 
Worklist. Copies the patient information to the local 
database. Stores the patient information and the 
examination results to the local the database.Stores 
images to a DICOM Server and to an image volume 
on the local hard drive.NOTE: WL-LA-DServ: Does 
not search the local database, only the DICOM 
Modality Worklist. 
						

							Configuring Connectivity
LOGIQ 5 Basic User Manual 16-103
Direction 2300002-100 Rev. 2
Screens
The Screens tab allows you to configure tools related to patient 
management. You can specify default system functionality such 
whether patient ID is required when you archive data, and if you 
want the system to automatically search the archive for a patient 
when you enter patient data.
 Figure 16-70. Connectivity Screens Preset Menu 
						

							Customizing Your System
16-104 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Screens (continued)
Table 16-60: Screens
Preset ParameterDescription
Columns in 
examination listingSelect the columns to add to or delete from the 
Examination list window.
Use free text 
addressesIn the Patient information window:When selected, 
the address information is entered in a single field 
(free text).When cleared, the address information 
(e.g. street, city, etc.) is entered in type-specific 
fields.
Use birthdate In the Patient information window, enter either the 
patient age or the birth date:When selected, enter 
birth date, then the age is calculated.When cleared, 
enter age (birth date field not available).
Use extended patient 
dialogIn the Patient information window:When selected, 
the entire patient information data is displayed. 
When cleared, patient information data displayed is 
restricted to a minimum (for example, Name and 
Patient ID).NOTE: When cleared, to display the 
entire patient information data in the Patient 
information window, press More.
Use extended search 
dialogIn the Search/Create Patient window:When 
selected, all the searching filters are displayed as 
default.When cleared, the searching criteria are 
restricted to a minimum.NOTE: When cleared, to 
display all the searching filters in the Search/Create 
Patient window, press More.
Auto search for 
patientIn the Search/Create Patient window:When 
selected, the system automatically searches 
through the selected patient archive, while the user 
enters patient information.When cleared, the 
automatic search tool is turned off. If you are trying 
to keep the past patient data confidential, DO NOT 
use this feature. 
Pre-defined text 
directlyIn the Examination list window:When selected, the 
Insert text key launches pre-defined text 
input.When cleared, the Insert text key opens the 
extended text field.
Examination List on 
Archive buttonWhen a patient is selected, and the user selects 
Archive:When selected, opens the Examination list 
window for the selected patient.When cleared, 
opens the Patient Information window for the 
selected patient. 
						

							Configuring Connectivity
LOGIQ 5 Basic User Manual 16-105
Direction 2300002-100 Rev. 2
Examination list window column configuration
You can create new columns, remove columns, and select the 
information to display in a column.
1. Move the Trackball to highlight a column.
2. Press Set.
The system displays a list of options.
3.  Do one of the following:
•  To create a new column to the left of the selected 
column, select INSERT.
•  To delete the selected column, select DELETE.
•  To select the information to display in the selected 
column, select from the list of data fields.
4. Press Set.
Automatic generation 
of patient IDIn the Search/Create Patient window:When 
selected, the Patient ID is not required when 
entering a new patient in the archive. The system 
automatically generates an ID number.When 
cleared, the Patient ID is required when entering a 
new patient in the archive.
Request 
acknowledge of End 
Exam actionWhen selected, the user is asked to confirm action 
when ending an examination.
Go directly to 
scanning from searchWhen selected, the system goes directly to the 
Scanning screen after the user selects or creates a 
patient record.When cleared, after you select or 
create a patient record, the system displays the 
Patient information window for further information 
entry. You must select Begin Exam to go to the 
scanning screen.
Table 16-60: Screens
Preset ParameterDescription 
						

							Customizing Your System
16-106 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Tools
The Tools tab allows you to:
•  Verify the DICOM directory on removable media
•  Format removable media (MO disk, rewritable CD, or ZIP 
disk)
 Figure 16-71. Connectivity Tools Preset Menu 
						

							Configuring Connectivity
LOGIQ 5 Basic User Manual 16-107
Direction 2300002-100 Rev. 2
Tools (continued)
The bottom of the screen lists properties of the selected media.
Formatting removable media
1.  Select the removable media from the Media list.
2.  Type a name for the removable media in the Label field.
NOTE:  Do not use the following characters for labelling:
 / : ; . , * < > | + = [ ]
3. Select Format.
Verifying removable media
1.  Select the removable media from the Media list.
2. Select Verify.Table 16-61: Tools
Preset ParameterDescription
Media Select the removable media to format or verify.
Label Type a label for a new removable MO disk (free 
text).
Verify Select to verify DICOM directory on removable 
DICOM disk.
Format Select to format removable media. 
						

							Customizing Your System
16-108 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Views
Views shows you an overview of the Ultrasound system’s 
connectivity architecture:
•  The currently selected dataflow
•  All configured dataflows
•  The network structure tree
•  The configured buttons dataflows
Views also allows you to verify service connectivity.
 Figure 16-72. Connectivity Views Preset Menu 
						

							Configuring Connectivity
LOGIQ 5 Basic User Manual 16-109
Direction 2300002-100 Rev. 2
Views (continued)
A dataflow is a set of services. When you select one of the 
configured dataflows, the ultrasound system is automatically set 
up according to the services associated with the selected 
dataflow. For information about editing dataflows, See ‘Dataflow’ 
for more information.
Each view includes a structure tree on the left and properties on 
the right. The properties section lists information about the 
selected service. The information shown in each view is as 
follows:Table 16-62: Views
Preset ParameterDescription
Current Select to show the current dataflow hierarchy.
Dataflow Select to show all dataflows.
Network Select to show network structure tree.
Buttons Select to show configured buttons dataflows.
Config Select to go to the Services tab and configure this 
service.
Check Select to verify connectivity for a device or service.If 
the service is a ***, the system performs a TCPIP 
ping.If the service is a ***, the system performs a 
DICOM echo.
Properties Lists information about the selected device or 
service. 
						

							Customizing Your System
16-110 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Current dataflow
The current dataflow view displays a three-level structure tree 
showing the following information:
•  The name of the current dataflow (Level 1)
•  The type of services associated to the dataflow (input or 
output services) (Level 2)
•  A list of the services configured for the current dataflow 
(Level 3)
 Figure 16-73. Connectivity Views: Current Dataflow