GE Logiq P5 User Manual

							Other Printing Options
LOGIQ 5 Basic User Manual 15-31
Direction 2300002-100 Rev. 2
Other Printing Options
Connecting to a Standard Computer Printer
You can now connect a standard computer printer, via the USB 
connection (Service). We currently support the HP970 CXI or 
HP990 CXI standard computer printers. 
NOTE:  You can connect a different printer if you have the driver for it on 
a CD-ROM (*.inf file).
1.  Connect the printer to the USB port at the back of the 
system (in the Service port). 
2.  Install the driver, if necessary. Please refer to the Basic 
Service Manual for more information. 
3.  Set the printer as the default printer. 
						

							Recording Images
15-32 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Connecting to a Standard Computer Printer (continued)
4.  Assign one of the print keys (P1-P4) to the standard printer 
via Utility --> Connectivity --> Buttons --> Select 
Destinations and select (Standard Print @ My Computer). 
This allows you to print the screen by pressing the print 
screen key. The system automatically determines the 
portion of the screen to print based upon what is currently 
displayed. 
 Figure 15-30. Print Button Example 
						

							Other Printing Options
LOGIQ 5 Basic User Manual 15-33
Direction 2300002-100 Rev. 2
Connecting to a Standard Computer Printer (continued)
5.  Bring up the worksheet you want to print on the monitor. Any 
page displayed on the monitor can be printed.
6.  Press the P1-4 key that you assigned in Step 2 above.
NOTE:  You can also set a preset to override the automatic area print 
and force the entire screen to print by pressing Utility -> System 
--> Setup and setting the Standard Printer to Print Full Screen.
NOTE:  Worksheets and Graphs are printed in reverse video for easier 
readibility. You can also set a preset to override this presentation 
by pressing Utility --> System --> Setup and setting the Standard 
Printer to Allow Reverse Video. 
External Printers
You can also connect an external printer through the External 
Printer 1/2 remote expose connections on the back of the 
system. 
To use a remote printer, assign a print key (P1-P4) via Utility --> 
Connectivity --> Buttons --> Select Destinations and select 
External Printer 1/2 @ My Computer. 
						

							Recording Images
15-34 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Transferring Patient Data to a PC
Transferring OB/GYN Patient Data to a PC
The LOGIQ 5 now supports the transfer of OB, GYN and 
Vascular patient data to a PC. 
NOTE:  The LOGIQ 5 currently supports Viewpoint patient data 
communications software for the PC. 
Connecting the LOGIQ 5 to the PC
You need to connect a RS232C Converter and RS232C Cross 
Cable to the USB port to connect a serial peripheral device to 
the system. 
 Figure 15-31. RS232C to USB Connection
CAUTIONBe sure to connect the converter and cable BEFORE booting 
the system. If not, the LOGIQ 5 does not recognize the 
peripheral device. 
1. System 3. USB-to-RS232C converter
2.  Peripheral device 4.  RS232C Cross Cable (female 9 pin-
to-female 9-pin)
USB RS232C12
34 
						

							Transferring Patient Data to a PC
LOGIQ 5 Basic User Manual 15-35
Direction 2300002-100 Rev. 2
Transferring Patient Data
After you perform a scan, you can send the patient and 
measurement data to a PC that accepts patient data. 
1.  Ensure that the peripheral device is on. 
2.  For the current patient, on the Worksheet screen, select 
Meas. Transf.
 Figure 15-32. Transferring OB Worksheet Data to a PC 
						

							Recording Images
15-36 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Transferring Patient Data (continued)
3.  The system transfers the data. A beep on the peripheral 
device indicates a successful transfer.  If there is a problem 
with the connection or transfer, the system displays an error 
message.
NOTE:  If you currently do a heart rate measurement without specifying 
a vessel, as in the case of a fetal heart, the measurement IS 
NOT automatically transferred to the PC. You need to enter this 
measurement manually on the PC. 
NOTE:  Deleted measurements from the worksheet are still sent to the 
off-line reporting PC. 
						

							VCR
LOGIQ 5 Basic User Manual 15-37
Direction 2300002-100 Rev. 2
VCR
Setting up the VCR
To set up the VCR, 
1. Select the Utility tab on the Touch Panel. 
2. Select System on the Touch Panel. 
 Figure 15-33. Utility Touch Panel 
						

							Recording Images
15-38 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2
Setting up the VCR (continued)
3. Press Peripherals. 
 Figure 15-34. VCR Setup Utility Page
4.  Trackball to the VCR pulldown menu, place the pointer on 
the down arrow and press Set, then move the Trackball to 
select the appropriate VCR. 
5. Press Save, then press Exit. 
6.  Turn off the LOGIQ 5, then turn it back on. 
CAUTIONBe sure to connect the converter and cable before booting up 
the system.  If not, the LOGIQ 5 does not recognize the 
peripheral device. 
						

							VCR
LOGIQ 5 Basic User Manual 15-39
Direction 2300002-100 Rev. 2
Using the VCR
To use the VCR, press VCR on the Control Panel. The following 
Touch Panel appears: 
 Figure 15-35. VCR Touch Panel
Table 15-2: VCR Functions and Appropriate Steps
VCR FunctionHow to Do
To record an image1.  Insert a tape into VCR. 
2. Press Record. 
3.  Press to activate and control the microphone. 
To pause recording Press Pause. 
To begin recording again Press Record again. 
To stop recording Press Stop/Eject. 
To rewind the VCR tape Press Rewind. 
To playback the tape Press Play. 
To adjust playback speed Move the Trackball to the left/right to decrease/increase playback speed. 
To move through the 
playback frame by frameAdjust the Frame by Frame dial right/left. 
To pause playback Press Pause. 
To begin playback again Press Play. 
To turn the microphone on/off Press MIC ON/OFF.  
						

							Recording Images
15-40 LOGIQ 5 Basic User Manual
Direction 2300002-100 Rev. 2 NOTE:  The VCR counter is displayed in two places: in the video area 
and outside the video area. The playback counter is in the video 
area and the current counter is outside the video area. 
Returning to Scanning
To return to scanning, select Video Source on the Touch Panel. 
To adjust playback audio 
volumeAdjust Volume left/right to lower/increase audio playback volume. 
To fast forward the tape Press Forward. 
To search for a recorded 
sequenceExams are marked so that you can search VCR tapes exam by exam. 
Press Index Search Forward/Reverse to move forward through the tape 
exam by exam. 
To adjust search speed Adjust Search Speed left/right to lower/increase search speed. 
To search to the end of the 
last examPress Search end of last exam. 
To reset the counter Press Counter Reset. 
To eject the VCR tape.  Press Stop/Eject twice. 
Table 15-2: VCR Functions and Appropriate Steps
VCR FunctionHow to Do