Canon printer MAXIFY MB2120 User Manual

							PrintingNetworkSettingsUse the operation panel to print the printer's current network settings.
Important

						

							InfrastructureInfrastructureEnable/DisableConnectionConnection statusActive/InactiveSSIDSSIDWireless LAN SSIDChannel *1ChannelXX (1 to 11)EncryptionEncryption methodNone/WEP/TKIP/AESWEP Key LengthWEP key length (bits)Inactive/128/64AuthenticationAuthentication methodNone/auto/open/shared/WPA-PSK/WPA2-
PSKSignal StrengthSignal strength0 to 100 [%]TCP/IPv4TCP/IPv4EnableIP AddressIP addressXXX.XXX.XXX.XXXSubnet MaskSubnet maskXXX.XXX.XXX.XXXDefault GatewayDefault gatewayXXX.XXX.XXX.XXXTCP/IPv6TCP/IPv6Enable/DisableLink Local AddressLink local addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXLink Local Prefix LengthLink local prefix lengthXXXManual SettingManual settingEnable/DisableIP Address *2IP addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet prefix lengthXXXStateless Address1 *2Stateless address 1XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXStateless Prefix Length1 *2Stateless prefix length 1XXXStateless Address2 *2Stateless address 2XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXStateless Prefix Length2 *2Stateless prefix length 2XXXStateless Address3 *2Stateless address 3XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXStateless Prefix Length3 *2Stateless prefix length 3XXXStateless Address4 *2Stateless address 4XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXX
352 
						

							Stateless Prefix Length4 *2Stateless prefix length 4XXXDefault Gateway1 *2Default gateway 1XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXDefault Gateway2 *2Default gateway 2XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXDefault Gateway3 *2Default gateway 3XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXDefault Gateway4 *2Default gateway 4XXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXIPsec *3IPsec settingActiveSecurity Protocol *3Security methodESP/ESP & AH/AHDirect ConnectionDirect connectionEnable/DisableConnectionConnection statusActive/InactiveSSIDSSIDDirect Connection SSIDPasswordPasswordDirect Connection password (10 alphanu-
meric characters)ChannelChannel3EncryptionEncryption methodAESAuthenticationAuthentication methodWPA2-PSKTCP/IPv4TCP/IPv4EnableIP AddressIP addressXXX.XXX.XXX.XXXSubnet MaskSubnet maskXXX.XXX.XXX.XXXDefault GatewayDefault gatewayXXX.XXX.XXX.XXXTCP/IPv6TCP/IPv6Enable/DisableLink Local AddressLink local addressXXXX:XXXX:XXXX:XXXX
XXXX:XXXX:XXXX:XXXXSubnet Prefix Length *2Subnet prefix lengthXXXIPsec *3IPsec settingActiveSecurity Protocol *3Security method
						

							Direct Conn. DevNameDevice name for direct connection
(Up to 32 characters)Device name for direct connectionWSD PrintingWSD printing settingEnable/DisableWSD TimeoutTimeout1/5/10/15/20 [min]LPD PrintingLPD printing settingEnable/DisableRAW PrintingRAW printing settingEnable/DisableBonjourBonjour settingEnable/DisableBonjour Service NameBonjour service nameBonjour service name (Up to 52 alphanumer-
ic characters)LLMNRLLMNR settingEnable/DisableSNMPSNMP settingEnable/DisableDNS ServerObtain DNS server address auto-
maticallyAuto/ManualPrimary ServerPrimary server addressXXX.XXX.XXX.XXXSecondary ServerSecondary server addressXXX.XXX.XXX.XXXProxy ServerProxy server settingEnable/DisableProxy AddressProxy addressXXXXXXXXXXXXXXXXXXXXProxy PortProxy port specification1 to 65535Cert. Fingerprt(SHA-1)Certificate fingerprint(SHA-1)XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXXCert. Fingerprt(SHA-256)Certificate fingerprint(SHA-256)XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX
("XX" represents alphanumeric characters.)
*1 Channel may range from 1 to 11 depending on country or region of purchase. *2 Network status is only printed when IPv6 is enabled.*3 Network status is only printed when IPv6 and IPsec settings are enabled.
354 
						

							ChangingWirelessLANConnectionMethodFollow either procedure below to change wireless LAN connection method (infrastructure or directconnection).
						

							NetworkSettings(IJNetworkDeviceSetupUtility)(Windows)
IJNetworkDeviceSetupUtility
StartingUpIJNetworkDeviceSetupUtility
IJNetworkDeviceSetupUtilityScreen
PerformingNetworkSettings
CheckingNetworkStatus
IJNetworkDeviceSetupUtilityMenus
OtherNetworkInformation
356 
						

							IJNetworkDeviceSetupUtilityIJ Network Device Setup Utility allows a network/printer administrator to manage printers on network. When
you perform printer setup, the utility is installed at the same time.
Use IJ Network Device Setup Utility for:
						

							StartingUpIJNetworkDeviceSetupUtilityStart up IJ Network Device Setup Utility as shown below.
						

							IJNetworkDeviceSetupUtilityScreen
Items on IJ Network Device Setup Utility Screen
Menus on IJ Network Device Setup Utility Screen
Items on IJ Network Device Setup Utility Screen Toolbar
ItemsonIJNetworkDeviceSetupUtilityScreen
The screen below appears when you start up IJ Network Device Setup Utility. Detected printers are listed on the screen and the items below are shown.
1.
ProductName
Displays the product name of detected printer. The icon below appears on the left if the printer cannot
be used.
: Appears when the printer has not been connected or configured.
: Appears when the IP address is duplicated to another printer.
: Appears when you cannot communicate with the printer.
Note

						

							SetupCompletedAppears after performing network setup and clicking  Set to close the window.
NotConnected Indicates the printer is required to perform wireless LAN setup.
Performing/Changing Wireless LAN Settings
NotSet Indicates the printer cannot be used on network. Specify an IP address or enable IPv6.
IPAddressOverlap Indicates the IP address is duplicated to another printer.
Unknown Indicates the printer used in the past cannot be used currently.
Note