Canon printer MAXIFY MB2120 User Manual

							GeneralNotes(ScannerDriver)ScanGear (scanner driver) is subject to the following restrictions. Keep these points in mind when using it.
ScannerDriverRestrictions
						

							OtherScanningMethods
ScanningwithWIADriver833 
						

							ScanningwithWIADriverYou can scan an item from a WIA (Windows Image Acquisition)-compliant application.
The procedure varies depending on the application. The following procedures are examples only. Refer to the application's manual for details.
Important

						

							ScannerThe currently set product name is displayed. To change the scanner, click  Change... and select
the product you want to use.
Profile Select  Photo(Default)  or Documents  according to the type of item to be scanned. To save a
new  Profile , select  Addprofile... . You can specify the details in the  AddNewProfile dialog box.
Source Select a scanner type. To scan from the platen, select  Flatbed. To scan from the ADF, select
Feeder(Scanoneside) .
Papersize Select the paper size.  Papersize can be set only when  Source is Feeder(Scanoneside) .
Colorformat Select the color mode in which to scan the item.
Filetype Select a data format from JPEG, BMP, PNG, and TIFF.
Resolution(DPI) Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Resolution
Note

						

							If there is document left in the ADF after previewing, press the OK button on the operation
panel and remove the document.5.
Click  Scan.
Scanning starts, then the scanned image appears in the application.
ScanningwithWIADriver1.0
The following is an example of scanning using "Paint."
1.
Place the item on the platen or ADF.
Positioning Originals (Scanning from Computer)
2.
Click  Fromscannerorcamera  from the File menu of Paint. (Select the command to
scan an item in the application.)
Note

						

							Resolution(DPI)Enter the resolution. Specify a value between 50 dpi and 600 dpi.
Resolution
Note

						

							IJNetworkScannerSelectorEX2MenuandSettingScreenIJ Network Scanner Selector EX2 allows you to select the scanners or printers to be used for scanning orprinting over a network from your computer or the operation panel.
After installation, IJ Network Scanner Selector EX2 appears in the notification area on the desktop.
Important

						

							AboutDisplays the version information.
In the displayed dialog box, you can change the language to be used in the application. The change
will be reflected after restarting the computer.
Exit Exits IJ Network Scanner Selector EX2; 
 (Enabled) or  (Disabled) disappears from the
notification area on the desktop.
Scan-from-PCSettingsScreen Right-click the icon from the notification area on the desktop, then select  Settings... to display the Scan-
from-PC Settings screen.
Your scanner or printer must be selected with IJ Network Scanner Selector EX2 before scanning over a
network.
Scanners MAC addresses of the scanners or printers that can be used over the network are displayed.
You can select one scanner or printer per model. Selecting a scanner or printer automatically enables
scanning from the operation panel.
Instructions Opens this guide.
Scan-from-Operation-PanelSettings The Scan-from-Operation-Panel Settings screen appears. You can select up to three scanners andprinters in total for scanning from the operation panel. You can scan items using the operation panel
of the selected scanner or printer, and send the scanned images to your computer over a network.
Important

						

							Important