Canon printer MAXIFY MB2120 User Manual

							WhatIsScanGear(ScannerDriver)?ScanGear (scanner driver) is software required for scanning documents. It enables you to specify the output
size and make image corrections when scanning.
ScanGear can be started from IJ Scan Utility or applications that are compatible with a standard interface
called TWAIN. (ScanGear is a TWAIN-compatible driver.)
WhatYouCanDowithThisSoftwareThis software enables you to preview scan results or set document type and output size, etc. when
scanning documents. It is useful when you want to scan in a specific color tone, as it allows you to make
various corrections and adjust brightness, contrast, etc.
Screens There are two modes: Basic Mode and Advanced Mode.
Switch modes by clicking a tab on the upper right of the screen.
Note

						

							AdvancedModeUse the  AdvancedMode  tab to specify the color mode, output resolution, image brightness, color tone,
etc. when scanning.
752 
						

							ScanningwithAdvancedSettingsUsingScanGear(Scanner
Driver)
StartingScanGear(ScannerDriver)
ScanninginBasicMode
ScanninginAdvancedMode
ScanningMultipleDocumentsfromtheADF(AutoDocumentFeeder)in
AdvancedMode
ScanningMultipleDocumentsatOneTimewithScanGear(ScannerDriver)
753 
						

							StartingScanGear(ScannerDriver)Use ScanGear (scanner driver) to make image corrections and color adjustments when scanning. ScanGear
can be started from IJ Scan Utility or other applications.
Note

						

							ScanninginBasicModeUse the  BasicMode  tab to scan easily by following the on-screen steps.
Refer to "
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple
documents at one time from the Platen.
When scanning from the ADF (Auto Document Feeder), documents are scanned without preview.
Important

						

							Important
						

							7.Set Imagecorrections  as required.8.
Click Scan.
Scanning starts.
Note

						

							ScanninginAdvancedModeUse the  AdvancedMode  tab to specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
Refer to "
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple
documents at one time.
Refer to "
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode " to scan
multiple documents placed on the ADF (Auto Document Feeder).
Important

						

							Note
						

							ScanningMultipleDocumentsfromtheADF(AutoDocument
Feeder)inAdvancedMode
Use the  AdvancedMode  tab to specify the image brightness, color tone, etc. and scan multiple documents
placed on the ADF (Auto Document Feeder) at one time. When using a model supporting ADF duplex
scanning, you can scan both sides of the documents automatically from the ADF.
When scanning from the ADF, documents are scanned without preview.1.
Place the documents on the ADF of the machine, then start ScanGear (scanner driver).
Placing Documents (ADF (Auto Document Feeder))
Starting ScanGear (Scanner Driver)
2.
Click the  AdvancedMode  tab and select Document(ADFSimplex)  or Document(ADF
Duplex)  for SelectSource .
Note