Canon printer MAXIFY MB2120 User Manual

							SettingtheStaplingMargin
The procedure for setting the staple side and the margin width is as follows:
1.
Open the printer driver setup window
2.
Specify the side to be stapledCheck the position of the stapling margin from  StaplingSide on the PageSetup  tab.
The printer analyzes the  Orientation and PageLayout  settings, and automatically selects the best
staple position. When you want to change the setting, select from the list.
3.
Set the margin width
If necessary, click  SpecifyMargin... and set the margin width, and then click  OK.
452 
						

							Note
						

							Fit-to-PagePrinting
The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be
used is as follows:
1.
Open the printer driver setup window
2.
Set fit-to-page printing
Select  Fit-to-Page  from the PageLayout  list on the PageSetup  tab.
3.
Select the paper size of the document
Using  PageSize , select the page size that is set with your application software.
4.
Select the print paper size
Select the size of the paper loaded in the printer from the  PrinterPaperSize list.
When the  PrinterPaperSize  is smaller than the  PageSize, the page image will be reduced. When the
PrinterPaperSize  is larger than the PageSize, the page image will be enlarged.
454 
						

							The current settings are displayed in the settings preview on the left side of the printer driver.5.
Complete the setup
Click  OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
455 
						

							ScaledPrinting
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printingSelect  Scaled  from the  PageLayout  list on the PageSetup  tab.
3.
Select the paper size of the document
Using  PageSize , select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:

						

							Important
						

							PageLayoutPrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the printer driver setup window
2.
Set page layout printing
Select  PageLayout  from the PageLayout  list on the PageSetup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the printer from the  PrinterPaperSize list.
4.
Set the number of pages to be printed on one sheet and the page order
If necessary, click  Specify..., specify the following settings in the  PageLayoutPrinting dialog box, and
click  OK.
459 
						

							PageLayoutTo change the number of pages to be printed on a single sheet of paper, select the number of pagesfrom the list.
PageOrder To change the page arrangement order, select a placement method from the list.
PageBorder To print a page border around each document page, check this check box.
5.
Complete the setup
Click  OK on the  PageSetup  tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
460