Canon printer PIXMA MG6820 User Manual

							1680Cause
Ink tanks are not installed in the correct positions. (The ink lamp flashes.)
What to Do Make sure the ink tanks are installed in the appropriate positions.
991 
						

							1681Cause
More than one ink tank of the same color is installed. (The ink lamp flashes.)
What to DoMake sure the ink tanks are installed in the appropriate positions.
992 
						

							1684Cause
The ink tank cannot be recognized.
What to DoPrinting cannot be executed because the ink tank may not be installed properly or may not be compatible
with this machine.
Install the appropriate ink tank.
If you want to cancel printing, press the machine's  Stop button.
993 
						

							1688Cause
The ink has run out. (The lamp on the ink tank flashes.)
What to DoReplace the ink tank and close the operation panel.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to disable the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation
of printing under the ink out condition.
Note

						

							1689Cause
Printer detected ink out condition (The lamp on the ink tank flashes).
What to DoReplace the ink tank and close the operation panel.
An ink tank that was once empty is installed.
Printing under the ink out condition may damage the machine.
If you want to continue printing, you need to disable the function for detecting the remaining ink level. To
disable this function, press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing
under the ink out condition or by using refilled ink tanks.
Note

						

							1700Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
996 
						

							1701Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
997 
						

							1712Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
998 
						

							1713Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
999 
						

							1714Cause
Ink absorber is almost full.
What to Do
Tap  OK on the touch screen to continue printing. Contact your nearest Canon service center to request a
repair.
1000