Canon printer PIXMA MG6820 User Manual

							Setting the Stapling Margin
The procedure for setting the staple side and the margin width is as follows:
1.
Open the printer driver setup window
2.
Specify the side to be stapledCheck the position of the stapling margin from  Stapling Side on the Page Setup  tab.
The printer analyzes the  Orientation and Page Layout  settings, and automatically selects the best
staple position. When you want to change the setting, select from the list.
3.
Set the margin width
If necessary, click  Specify Margin... and set the margin width, and then click  OK.
401 
						

							Note
						

							Execute Borderless PrintingThe borderless printing function allows you to print data without any margin by enlarging the data so that it
extends slightly off the paper. In standard printing, margins are created around the document area.
However, in borderless printing function, these margins are not created. When you want to print data such
as a photo without providing any margin around it, set borderless printing.
The procedure for performing borderless printing is as follows:
You can also set borderless printing in  Additional Features on the Quick Setup  tab.
Setting Borderless Printing
1.
Open the printer driver setup window
2.
Set borderless printing Select  Borderless  from the Page Layout  list on the Page Setup  tab.
Click OK when the confirmation message appears.
When a message prompting you to change the media type appears, select a media type from the list
and click  OK.
3.
Check the paper size
403 
						

							Check the Page Size list. When you want to change it, select another page size from the list. The list
displays only sizes that can be used for borderless printing.4.
Adjust the amount of extension from the paper
If necessary, adjust the amount of extension using the  Amount of Extension slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to
the left decreases the amount. It is recommended to set the slider at the second position from the right for most cases.
Important

						

							Important
						

							Fit-to-Page Printing
The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be
used is as follows:
1.
Open the printer driver setup window
2.
Set fit-to-page printing
Select  Fit-to-Page  from the Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Select the print paper size
Select the size of the paper loaded in the printer from the  Printer Paper Size list.
When the  Printer Paper Size  is smaller than the  Page Size, the page image will be reduced. When the
Printer Paper Size  is larger than the Page Size, the page image will be enlarged.
The current settings are displayed in the settings preview on the left side of the printer driver.
406 
						

							5.
Complete the setup
Click  OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
407 
						

							Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printingSelect  Scaled  from the  Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:

						

							Note