Canon printer PIXMA MG6820 User Manual

							3.
On the Printers  tab, clear printer that was set up for president
To return to the  Group management  screen, select Close.
Important

						

							What is a Security code?A  Security code  identifies the user when multiple other users are sharing the same printer.
Important

						

							Adding a PrinterWith one account, you can use the Canon Inkjet Cloud Printing Center services on multiple printers.
The procedure for adding a printer is as follows:
If your model has color LCD monitor1.
Check that an e-mail containing the URL has been sent to the registered e-mail address ,
and access the URL
2.
Enter the information according to the instructions on the authentication screen, and then
select  Log in
3.
When printer addition complete message appears, select  OK
The printer addition process ends, and the main screen of Canon Inkjet Cloud Printing Center
appears.
Note

						

							If your model has monochrome LCD monitorIf your model has no LCD monitor1.
Check that an e-mail containing the URL has been sent to the registered e-mail address,
and access the URL
If your model has monochrome LCD monitor
If your model has no LCD monitor
2.
Enter the information according to the instructions on the authentication screen, and then
select  Log in
3.
When printer addition complete message appears, select  OK
The printer addition process ends, and the main screen of Canon Inkjet Cloud Printing Center
appears.
Note

						

							Adding a PIXMA/MAXIFY Cloud Link UserSeveral people can use one printer.
This section describes the user addition procedure and the user privileges.
Adding a user1.
On the service screen, select  Manage users from .
2.
Select Add user
Note

						

							6.
Register a password for logging in to the Canon Inkjet Cloud Printing Center.
On the My Account Registration screen, enter you desired password into  Password and Password
(Confirmation)  and select Next.
Important

						

							Important

						

							Note
						

							Troubleshooting Canon Inkjet Cloud Printing Center
If an app cannot be installed
If the registered app is not in the Apps list
If the information is not updated when you press the update button
If you do not receive the registration e-mail
If you cannot print
Printing starts on its own even if you do not do anything
If you are unable to log in correctly even after entering the correct password in iOS or Mac
If an app cannot be installed Check the country or region where the printer was purchased.
If the printer is taken outside the country or region where it was purchased, apps cannot be installed.
If You Are Using iP110 series
Check the country or region where the printer was purchased.
If you take the printer outside the country or region where you purchased it, you may not be able to install
certain apps.
You can continue to use apps that are already installed, as long as the apps support the country or region
you are moving to.
If the registered app is not in the Apps list
Check the display language of Canon Inkjet Cloud Printing Center.
If the display language is switched to a language that does not support an app, the app will not be
displayed in the apps list but will continue to be registered. If you switch back to the target language of the app, it will be displayed in the apps list and you will be
able to start, register, or unregister the app.
If the information is not updated when you press the update button
Because the Properties screen requires network connection with this product, the information may not be reflected immediately. Please wait awhile, and then try updating the information again.If the information is still not updated, then check that the product is connected to the Internet.
If you do not receive the registration e-mail You may have entered a different e-mail address during the user registration of Canon Inkjet Cloud
Printing Center.
If your model has color LCD monitor
On the printer's Home screen, select 
  Setup  ->  Web service setup  -> Web service
connection setup  -> IJ Cloud Printing Center setup  -> Delete from this service  to delete the
service registration.
150