Canon printer PIXMA MG6820 User Manual

							Main Components and Their Use
Main Components
Power Supply
Using the Operation Panel
231 
						

							Main Components
Front View
Rear View
Inside View
Operation Panel
232 
						

							Front View
(1) operation panelUse to change the settings of the machine or to operate it. Also, lift and open it to replace an ink tank, to
check the ink lamp, or to remove jammed paper inside the machine.
Operation Panel
(2) document cover Open to load an original on the platen glass.
(3) paper guides Align with both sides of the paper stack.
(4) cassette Load paper here. Two or more sheets of the same size and type of paper can be loaded at the same
time, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
Loading Envelopes
(5) front cover Open and pull out to load paper. Also, open when printing.
(6) paper support Extend to load paper in the cassette.
(7) output tray extension Open to support ejected paper.
(8) paper output support Extend to support ejected paper.
(9) paper output tray Printed paper is ejected. Open it before printing.
233 
						

							(10) card slotInsert a memory card.
Before Inserting the Memory Card
(11) Access lamp Lights or flashes to indicate the memory card status.
Inserting the Memory Card
(12) platen glass Load an original here.
234 
						

							Rear View
(1) transport unitOpen when removing jammed paper.
(2) power cord connector Plug in the supplied power cord.
(3) USB port Plug in the USB cable to connect the machine with a computer.
Important

						

							Inside View
(1) ink lampsLights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(2) print head holder The print head is pre-installed.
Note

						

							Operation Panel* All lamps on the operation panel are shown lit in the figure below for explanatory purposes.
(1) ON button/POWER lamp Turns the power on or off. Lights after flashing when the power is turned on. Before turning on thepower, make sure that the document cover is closed.
Turning the Machine On and Off
(2) HOME button Used to display the HOME screen.
Using the Operation Panel
(3) touch screen Displays messages, menu items, and the operational status. Directly touch the screen lightly with your
finger tip to select a menu item or displayed button. You can also preview photos on a memory card
before printing.
Basic Operation of the touch screen
(4) Black button Starts black & white copying, scanning, etc.
(5) Color button Starts color copying, scanning, etc.
(6)  Stop  button
(7)  Alarm  lamp
Lights or flashes when an error occurs.
(8) Back button Returns the touch screen to the previous screen.
Using the Function Buttons
237 
						

							Power Supply
Confirming that the Power Is On
Turning the Machine On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
238 
						

							Confirming that the Power Is OnThe  POWER  lamp is lit when the machine is turned on.
Even if the touch screen is off, if the  POWER lamp is lit, the machine is on.
Note

						

							Turning the Machine On and OffTurning on the machine1.
Press the  ON button to turn on the machine.
The  POWER  lamp flashes and then remains lit.
Confirming that the Power Is On
Note