Canon printer PIXMA MG6820 User Manual

							Important
						

							8.Click Scan.
Scanning starts.
Note

						

							Scanning in Advanced ModeUse the  Advanced Mode  tab to specify the color mode, output resolution, image brightness, color tone, etc.
when scanning.
Refer to "
Scanning Multiple Documents at One Time with ScanGear (Scanner Driver) " to scan multiple
documents at one time.
Refer to "
Scanning Multiple Documents from the ADF (Auto Document Feeder) in Advanced Mode " to scan
multiple documents placed on the ADF (Auto Document Feeder).
Important

						

							3.Set Input Settings according to the document or purpose.4.
Click Preview .
Preview images appear in the Preview area.
5.
Set Output Settings .
6.
Adjust the cropping frame (scan area), correct image, and adjust colors as required.
Adjusting Cropping Frames (ScanGear)
Image Settings
Color Adjustment Buttons
7.
Click Scan.
Scanning starts.
Note

						

							Scanning Multiple Documents from the ADF (Auto Document
Feeder) in Advanced Mode
Use the  Advanced Mode  tab to specify the image brightness, color tone, etc. and scan multiple documents
placed on the ADF (Auto Document Feeder) at one time. When using a model supporting ADF duplex
scanning, you can scan both sides of the documents automatically from the ADF.
When scanning from the ADF, documents are scanned without preview.1.
Place the documents on the ADF of the machine, then start ScanGear (scanner driver).
Placing Documents (ADF (Auto Document Feeder))
Starting ScanGear (Scanner Driver)
2.
Click the  Advanced Mode  tab and select Document (ADF Simplex)  or Document (ADF
Duplex)  for Select Source .
Note

						

							Note
						

							Scanning Multiple Documents at One Time with ScanGear
(Scanner Driver)
You can scan two or more photos (small documents) on the Platen at one time on the  Basic Mode tab and
Advanced Mode  tab.
This section explains how to scan multiple documents from the  Basic Mode tab.
Important

						

							3.
Click Preview .
Thumbnails of the preview images appear in the Preview area. Cropping frames are specified automatically according to the document size.
4.
Set  Destination .
5.
Set Output Size  according to purpose.
6.
Adjust the cropping frames and set  Image corrections as required.
Note

						

							7.Select the images you want to scan.
Select the checkboxes of the images you want to scan.8.
Click  Scan.
Scanning Multiple Documents in Whole Image View
Follow these steps if thumbnails are not displayed correctly when previewed or if you want to scan multiple documents as a single image.
Note

						

							Adjust the size and position of the cropping frames on the preview image. You can also create two or
more cropping frames.
If an area is not specified, the document will be scanned at the document size (Auto Crop). If an area is specified, only the portion in the specified area will be scanned.
Adjusting Cropping Frames (ScanGear)
5.
Set  Image corrections  as required.
6.
Click Scan.
Areas framed by broken lines are scanned.
Note