Canon printer PIXMA MG6820 User Manual

							Loading Plain Paper / Photo PaperYou can load plain paper or photo paper.
Important

						

							3.
Holding the right tab on the front cover, pull out the cassette until it stops.
4.
Use the right paper guide (A) to slide both paper guides all the way out.
5.
Load the paper in the center of the cassette WITH THE PRINT SIDE FACING DOWN.
Push the paper stack all the way to the back of the cassette.
Important

						

							6.
Slide the right paper guide (A) to align the paper guides with both sides of the paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Note

						

							7.Holding the right tab on the front cover, push the cassette back until the arrow () on the
front cover is aligned with the arrow (
) on the machine.
After pushing the cassette back, the paper information registration screen is displayed on the touch screen.
8.
Select the size and type of the loaded paper in the cassette at  Page size and Type , then
tap  OK.
If a message is displayed on the screen, follow the directions in the message to complete registration.
Paper Settings
9.
Extend the paper support (F), then open the output tray extension (G).
10.
Open the paper output tray (H) gently, then extend the paper output support (I).
164 
						

							Important

						

							Loading EnvelopesYou can load Envelope DL and Envelope Com 10.
The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly.
Important

						

							3.
Holding the right tab on the front cover, pull out the cassette until it stops.
4.
Use the right paper guide (A) to slide both paper guides all the way out.
5.
Load the envelopes in the center of the cassette WITH THE ADDRESS SIDE FACING
DOWN.
The folded flap of the envelope will be faced up on the left side.
B: Rear side
C: Address side
Push the envelopes all the way to the back of the cassette.
Up to 5 envelopes can be loaded at once.
167 
						

							6.
Slide the right paper guide (A) to align the paper guides with both sides of the envelopes.
Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly.
Note

						

							8.
Select the size and type of the loaded envelopes in the cassette at Page size and Type ,
then tap  OK.
Paper Settings
9.
Extend the paper support (F), then open the output tray extension (G).
10.
Open the paper output tray (H) gently, then extend the paper output support (I).
169 
						

							Important