Canon printer PIXMA MG6820 User Manual

							You can select the setting menus below.
Print settings
LAN settings
Device user settings
PictBridge print settings
Language selection
Home screen background color
Firmware update
Cassette settings
Reset setting
Note

						

							Print settings
						

							LAN settings
						

							Wireless LAN securityInactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 addressXXX. XXX. XXX. XXX (12 characters)IPv4 subnet maskXXX. XXX. XXX. XXX (12 characters)IPv4 default gatewayXXX. XXX. XXX. XXX (12 characters)IPv6 addressXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)IPv6 subnet prefix lengthXXX (up to 3 digits)IPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC addressXX:XX:XX:XX:XX:XX (12 characters)IPsec settingsEnable (ESP)/Enable (ESP & AH)/Enable (AH)/DisablePre-shared keyXXXXXXXXXXXXXXXX (16 characters)Printer nameXXXXXXXXXXXXXXX (up to 15 characters)Bonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)


						

							IPv6 subnet prefix lengthXXX (up to 3 digits)IPv6 default gatewayXXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)MAC addressXX:XX:XX:XX:XX:XX (12 characters)IPsec settingsDisablePre-shared keyXXXXXXXXXXXXXXXX (16 characters)Printer nameXXXXXXXXXXXXXXX (up to 15 characters)Bonjour service nameXXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)Direct connection device nameXXXXXX-XXXXXXseries
("XX" represents alphanumeric characters.)


						

							Selects whether WSD is enabled or disabled.
Note

						

							Selecting Yes displays the confirmation screen when a Wi-Fi Direct compatible device is
connecting the machine.
Using Machine with Direct Connection
267 
						

							Device user settings
						

							Selecting ON enables the machine to turn on automatically when a scanning command from a
computer or printing data is sent to the machine.
Note

						

							PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on PictBridge (Wireless LAN) Compliant Device
Select the print quality, when printing directly from a PictBridge (Wireless LAN) compliant device.
1.
Page size
Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper size to Default  on
the PictBridge (Wireless LAN) compliant device.
2.
Type  (Media type)
Select the media type when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper type to Default  on
the PictBridge (Wireless LAN) compliant device.
3.
Print qlty  (Print quality)
Select the print quality when printing directly from a PictBridge (Wireless LAN) compliant device.
4.
Border  (Bordered/Borderless print)
Select the bordered/borderless layout.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Layout to Default  on the
PictBridge (Wireless LAN) compliant device.
270