Canon printer PIXMA MG7520 User Manual

							4.
Align the paper guide (A) in front with the paper stack.
For standard sizes, align the paper guide (A) with where it clicks into place.
5.
Slide the paper guide (B) on the right to align the right and left guides with both sides of the paper stack.
Do not slide the paper guides too hard against the paper. The paper may not be fed properly.
Note
•
Do not load sheets of paper higher than the load limit mark (F).
•
Keep the paper stack height below the tabs (G) of the paper guides.
Note
•
To load paper larger than A4 size in the cassette 2, press down the lock (H) on the cassette 2, thenextend the cassette 2.
161 
						

							The cassette 2 sticks out of the machine when correctly set. Do not force the cassette 2 into themachine any further.
This can damage the machine or cassette 2.
6.
Insert the cassette 2 into the machine.
Push the cassette 2 into the machine until it stops.
After inserting the cassette into the machine, the paper information registration screen for the cassette is displayed on the touch screen.
7.
Select the size and type of the loaded paper in the cassette 2 at  Page size and Type , then
tap  Register .
If a message is displayed on the screen, follow the directions in the message to complete registration.
Paper setting for Printing
162 
						

							3.
Open the paper output tray.
1.
Holding both sides of the paper output tray, gently open it.The output tray extension opens automatically when the paper output tray is opened.
2.
Extend the paper output support.
Note
•
When printing, select the size and type of the loaded paper on the print settings screen of the operation
panel or printer driver.
163 
						

							Loading EnvelopesYou can load Envelope DL and Envelope Com 10.
The address is automatically rotated and printed according to the envelope's direction by specifying with the printer driver properly.
Important
•
Printing of envelopes from the operation panel or from a digital camera is not supported.
•
Do not use the following envelopes. They could jam in the machine or cause the machine to malfunction.
•
Envelopes with an embossed or treated surface
•
Envelopes with a double flap
•
Envelopes whose gummed flaps are already moistened and adhesive
1.
Prepare envelopes.
•
Press down on all four corners and edges of the envelopes to flatten them.
•
If the envelopes are curled, hold the opposite corners and gently twist them in the oppositedirection.
•
If the corner of the envelope flap is folded, flatten it.
Important
•
The envelopes may jam in the machine if they are not flat or the edges are not aligned. Make surethat no curl or puff exceeds 0.1 inch (3 mm).
•
Do not flatten the leading edge of envelopes. Otherwise, the printing position may shift out of
place.
2.
Load envelopes.
1.
Pull out the cassette 2 from the machine.
164 
						

							2.
Slide the paper guide (A) in front and (B) on the right to open the guides.
3.
Load the envelopes WITH THE PRINT SIDE FACING DOWN, and place them in the center of
the cassette 2.
The folded flap of the envelope will be faced up on the left side.
(C) Rear side
(D) Address side
Up to 10 envelopes can be loaded at once.
Note
•
Align the envelope stack with the edge of the cassette 2 as shown in the figure below.
If the envelopes are in contact with the protrusion (E), the envelopes may not be fed properly.
165 
						

							4.Align the paper guide (A) in front with the envelopes.5.
Slide the paper guide (B) on the right to align the right and left guides with both sides of theenvelopes.
Do not slide the paper guides too hard against the envelopes. The envelopes may not be fed properly.
Note
•
Do not load envelopes higher than the load limit mark (F).
•
Keep the envelope stack height below tabs (G) of the paper guides.
6.
Insert the cassette 2 into the machine.
Push the cassette 2 into the machine until it stops.
After inserting the cassette into the machine, the paper information registration screen for the cassette is displayed on the touch screen.
7.
Select the size and type of the loaded envelopes in the cassette 2 at  Page size and Type ,
then tap  Register .
Paper setting for Printing
166 
						

							3.
Open the paper output tray.
1.
Holding both sides of the paper output tray, gently open it.The output tray extension opens automatically when the paper output tray is opened.
2.
Extend the paper output support.
Note
•
When printing, select the size and type of the loaded envelopes on the print settings screen of theprinter driver.
167 
						

							Media Types You Can UseChoose paper suitable for printing, for the best print results. Canon provides you various types of paper to
enhance the fun of printing, such as stickers as well as papers for photo or document. We recommend the
use of Canon genuine paper for printing your important photos.
Media Types
Commercially available papers•
Plain Paper (including recycled paper)
•
Envelopes*1
Canon genuine papers
The Model Number of Canon genuine paper is shown in brackets. Refer to the instruction manual
supplied with the paper for detailed information on the printable side and notes on handling paper. For
information on the page sizes available for each Canon genuine paper, access our website.
Note
•
You may not be able to purchase some Canon genuine papers depending on the country or region of purchase. Paper is not sold in the US by Model Number. Purchase paper by name.
Paper for printing photos:
•
Photo Paper Pro Platinum 
•
Glossy Photo Paper "Everyday Use" 
•
Photo Paper Glossy 
•
Photo Paper Plus Glossy II 
•
Photo Paper Pro Luster 
•
Photo Paper Plus Semi-gloss 
•
Matte Photo Paper 
Paper for printing business documents:
•
High Resolution Paper *1
Paper for creating your own prints:
•
T-Shirt Transfers *1
•
Photo Stickers 
*1 Printing to this paper from the operation panel or from a digital camera is not supported.
Paper Load Limit
Paper Settings on the Printer Driver and the Printer (Media Type)
Note
•
You can print onto a printable disc using the disc tray supplied with the machine.
Placing a Printable Disc
•
When printing photos saved on a PictBridge compliant device, you must specify the page size and media type.
Printing from a Digital Camera
168 
						

							•You can use non-Canon genuine art paper. For details, access our website.You cannot print in the top and bottom 1.38 inch (35 mm) margins of the paper (in the printing direction).
Sizes for Art Paper
Before Printing on Art Paper
Page Sizes
You can use the following page sizes.
Note
•
You can load the page sizes as follows.
•
cassette 1: 4" x 6" (10 x 15 cm) and 5" x 7" (13 x 18 cm)
•
cassette 2: A4, B5, A5, Letter, Legal, 8" x 10" (20 x 25 cm), Envelope DL, and Envelope Com 10
•
Printing on the following page sizes from the operation panel or from a digital camera is not
supported.
•
Legal and Envelopes
Standard sizes:
•
Letter
•
Legal
•
A5
•
A4
•
B5
•
4" x 6" (10 x 15 cm)
•
5" x 7" (13 x 18 cm)
•
8" x 10" (20 x 25 cm)
•
Envelope DL
•
Envelope Com 10
Non-standard sizes:
You can print on non-standard size paper within the following ranges.
•
cassette 1
- Minimum size: 3.50 x 5.00 inches (89.0 x 127.0 mm)
- Maximum size: 7.87 x 7.28 inches* (200.0 x 184.9 mm*)
•
cassette 2
- Minimum size: 3.54 x 7.29 inches* (90.0 x 185.0 mm*) - Maximum size: 8.50 x 14.00 inches (215.9 x 355.6 mm)
* Paper may be fed from a different paper source depending on the operating system of your computer.
Paper Weight
You can use paper in the following weight range.
•
17 to 28 lb (64 to 105 g /m 2
) (plain paper except for Canon genuine paper)
169 
						

							* You can use non-Canon genuine specialty paper that is up to 53 lb (200 g /m2
).
Do not use heavier or lighter paper (except for Canon genuine paper), as it could jam in the machine.
Notes on Storing Paper•
Take out only the necessary number of paper from the package, just before printing.
•
To avoid curling, when you do not print, put unused paper back into the package and keep it on alevel surface. And also, store it avoiding heat, humidity, and direct sunlight.
170