Canon printer PIXMA MG7520 User Manual

							Setting for Scanning from the Operation Panel
You can make the setting for scanning from the operation panel.
Important
•
Set IJ Scan Utility to use your scanner or printer via a network connection beforehand.
Setting for Scanning with IJ Scan Utility
1.
Check that IJ Network Scanner Selector EX is running.
If IJ Network Scanner Selector EX is running, 
 (IJ Network Scanner Selector EX) appears in the
notification area on the desktop. Click 
 to check the hidden icons as well.
Note
•
If the icon is not displayed in the notification area on the desktop, follow the procedure below to start.
•
Windows 8.1 / Windows 8:
Click  IJ Network Scanner Selector EX  on the Start screen.
If  IJ Network Scanner Selector EX  is not displayed on the Start screen, select the  Search
charm, then search for "IJ Network Scanner Selector EX".
•
Windows 7/Windows Vista/Windows XP:
From the  Start menu, click  All Programs  > Canon Utilities  > IJ Network Scanner
Selector EX  > IJ Network Scanner Selector EX .
The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screen
appears. In that case, skip ahead to Step 3.
2.
In the notification area on the desktop, right-click  (IJ Network Scanner Selector EX),
then select  Settings....
The Scan-from-PC Settings screen appears.
3.
Click  Scan-from-Operation-Panel Settings .
The Scan-from-Operation-Panel Settings screen appears.
4.
Select your scanner or printer from  Scanners and click OK.
Select the MAC address of your scanner or printer.
Note
•
When multiple scanners are connected via a network, you can select up to three scanners.
5.
In the Scan-from-PC Settings screen, click  OK.
Note
•
If your scanner or printer does not appear, check the following, click  OK to close the screen, then
reopen it and try selecting again.
791 
						

							•MP Drivers is installed•
Network settings of your scanner or printer is completed after installing the MP Drivers
•
Network communication between your scanner or printer and computer is enabled
If your scanner or printer still does not appear, refer to "Problems with Network Communication" for
your model from Home of the  Online Manual.
792 
						

							Selecting a Response to Commands from the Operation Panel
Using IJ Scan Utility
IJ Scan Utility allows you to specify how to respond when scanning from the operation panel.
Note
•
The screens for scanning with Auto Scan from the operation panel are used as examples in thefollowing descriptions.
1.
Start IJ Scan Utility.
2.
Click  Settings... .
The Settings dialog box appears.
3.
Select a scan mode on the  (Scanning from the Operation Panel) tab.
793 
						

							Note•
Refer to the following for details.
Settings (Save to PC (Auto)) Dialog Box
Settings (Save to PC (Photo)) Dialog Box
Settings (Save to PC (Document)) Dialog Box
Settings (Attach to E-mail (Photo)) Dialog Box
Settings (Attach to E-mail (Document)) Dialog Box
4.
Set Scan Options .
5.
Specify the file name and other settings in  Save Settings.
794 
						

							6.
Select the application you want to start after scanning in Application Settings.
7.
Click OK.
795 
						

							The responses will be executed according to the specified settings when you start scanning from theoperation panel.
796 
						

							Troubleshooting
The Machine Cannot Be Powered On
Printing Does Not Start
Paper Does Not Feed Properly/"No Paper" Error Occurs
Print Results Not Satisfactory
Ink Is Not Ejected
Paper Jams
If an Error Occurs
Cannot Print on the Disc Label
Search Each Function
Problems with Network Communication
Problems with Printing
Problems with Printing Quality
Problems with Scanning
Problems with the Machine
Problems with Installation/Downloading
About Errors/Messages Displayed
If You Cannot Resolve the Problem
797 
						

							Problems with Network Communication
Problems with the Machine While Using with Network
Cannot Detect a Machine on a Network
Other Problems with Network
798 
						

							Problems with the Machine While Using with Network
The Machine Stopped Working Suddenly
Ink Remaining Level Is Not Displayed on Printer Status Monitor of the Machine
Printing Speed Is Slow
Cannot Use the Card Slot via Network
Cannot Use the Machine on Replacing an Access Point or Changing Its settings
799 
						

							The Machine Stopped Working Suddenly
Cannot Communicate with the Machine After the Network Settings Are Changed
Cannot Communicate with the Machine over the Wireless LAN
Cannot Communicate with the Machine Using the Access Point Mode
Cannot Communicate with the Machine over the Wired LAN
Cannot Print, Scan, or Access the Card Slot from a Computer Connected to the NetworkCannot Communicate with the Machine After the Network Settings AreChanged
It may take a while for the computer to obtain the IP address, or you may need to restart your computer.
Search for the machine again after confirming a valid IP address is assigned to the computer.
Cannot Communicate with the Machine over the Wireless LAN
Check1  Make sure that the machine is turned on.
Check2 Make sure that the network settings in the machine are identical with those of
the access point.
Refer to the instruction manual provided with the access point or contact its manufacturer to check the access
point settings, and then modify the machine settings.
How to Set an Encryption Key
Check3  Make sure that the machine is not placed far away from the access point.
The access point is located indoors within the effective range for wireless communication. Locate the machine
within 164 ft. / 50 m from the access point.
Check4  Make sure that there is no obstruction.
Wireless communication between different rooms or floors is generally poor. Adjust the location of the devices.
Check5  Make sure that there is no source of radio wave interference in your vicinity.
If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed
nearby, the device may cause interference. Place the wireless station as far away from the interference source
as possible.
Check6  Make sure that the network settings of the computer are correct.
For the procedures to connect a network device to the computer and set them up, refer to the instruction manual of your network device or contact its manufacturer.
Check7  Make sure that the radio status is good and adjust the installation positions
while monitoring the radio status with IJ Network Tool.
Monitoring Wireless Network Status
Check8  Make sure that a valid wireless channel is used.
800