Canon printer PIXMA MG7520 User Manual

							About Disc Label Printing
Copying the Label Side of Disc
Printing Photo from a Memory Card onto the Disc Label
551 
						

							Copying the Label Side of DiscYou can copy the label of an existing BD/DVD/CD and print it on a printable disc.
Important
•
You cannot print on 3.15 inches / 8 cm printable discs.
•
Do not attach the disc tray or place the printable disc until the message asking you to set them is
displayed. Doing so can damage the machine.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Advanced print .
Using the Operation Panel
3.
Tap Copy label to disc label .
The print area setting screen is displayed.
4.
Specify the print area.
A.
Tap to specify the outer circle.
B.
Tap to specify the inner circle.
C.
Tap to finalize to specify the print area.
Note
•
Measure the outer and inner diameters of the printing surface of the printable disc and make sure
you set a value smaller than the measured value for the outer diameter, and a value larger than
the measured value for the inner diameter.
552 
						

							•For information on printable discs, contact their manufacturers.5.
Tap a printable disc type.
Note
•
If your printable disc is the recommended disc, specify Recommended disc for the suitable
density printing. If not, specify  Other disc.
6.
Follow the on-screen instructions to load the copy source BD/DVD/CD on the Platen Glass,
then tap  OK.
The print setting confirmation screen is displayed.
Important
•
Be sure to load the copy source BD/DVD/CD with its label side down on the center of the Platen
Glass. If you load it near the edge of the Platen Glass, part of the image may be cut off.
7.
Touch the  Color button for color copying, or the  Black button for black & white copying.
8.
Follow the on-screen instructions to set the printable disc.
553 
						

							Note
•
You can see the procedure to set the printable disc by tapping How to set. The next screen is
displayed by tapping  Next. Additionally, touching the  Stop button returns to the print confirmation
screen.
•
For details on how to set the printable disc:
Placing a Printable Disc
9.
Tap  OK.
The machine starts copying.
Note
•
Touch the  Stop button to cancel copying.
•
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
•
To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten discs when printing more than ten discs continuously. To stop the printing operation, detach
the disc tray from the machine, then close the disc tray guide. After approximately three minutes
have elapsed, open the disc tray guide, attach the disc tray to the machine, then resume printing.
•
If printing is misaligned, adjust the printing position using  Adjust disc print area in Print settings
under  Device settings .
Print settings
554 
						

							Printing Photo from a Memory Card onto the Disc LabelYou can print a photograph saved on a memory card onto the disc label of the printable disc.
Important
•
You cannot print on 3.15 inches / 8 cm printable discs.
•
Do not attach the disc tray or place the printable disc until the message asking you to set them is
displayed. Doing so can damage the machine.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Advanced print .
Using the Operation Panel
3.
Insert the memory card into the card slot.
Note
•
If you insert the memory card before you select  Advanced print on the HOME screen, the photo
selection screen in  Photo is displayed.
If both photo files and PDF files are saved on the memory card, the confirmation screen to select
which file you print is displayed.
To display the HOME screen, touch the  HOME button.
4.
Tap Print photos to disc label .
The print area setting screen is displayed.
Note
•
If no printable photo data is saved on the memory card,  Data of supported types are not saved.
is displayed on the touch screen.
•
If more than 2,000 photo data are saved on the memory card, the photo data is split by group per 2,000 photos in reverse chronological order (date last modified) automatically. Check the
message displayed on the touch screen, then tap  OK.
5.
Specify the print area.
A.
Tap to specify the outer circle.
555 
						

							B.Tap to specify the inner circle.C.
Tap to finalize to specify the print area.
Note
•
Measure the outer and inner diameters of the printing surface of the printable disc and make sureyou set a value smaller than the measured value for the outer diameter, and a value larger than
the measured value for the inner diameter.
•
For information on printable discs, contact their manufacturers.
6.
Tap a printable disc type.
Note
•
If your printable disc is the recommended disc, specify  Recommended disc for the suitable
density printing. If not, specify  Other disc.
7.
Tap the photo you want to print.
Note
•
Other options
Using Useful Display Functions
8.
Specify the print area with trimming.
A.
Drag to position the trimming frame.
B.
Drag to set the trimming frame size.
C.
Tap to finalize your selection of trimming area.
When the area to be cropped is specified, the print setting confirmation screen is displayed.
9.
Check the print settings, then touch the  Color button.
10.
Follow the on-screen instructions to set the printable disc.
Note
•
You can see the procedure to set the printable disc by tapping  How to set. The next screen is
displayed by tapping  Next. Additionally, touching the  Stop button returns to the print confirmation
screen.
•
For details on how to set the printable disc:
556 
						

							Placing a Printable Disc11.
Tap OK.
The machine starts printing.
Note
•
Touch the  Stop button to cancel printing.
•
After printing, allow the printing surface of the disc to dry naturally. Do not use hairdryers or
expose the disc to direct sunlight to dry the ink. Do not touch the printing surface until the ink has
dried.
•
To keep the print quality at an optimal level, it is recommended to stop printing discs once every ten discs when printing more than ten discs continuously. To stop the printing operation, detach
the disc tray from the machine, then close the disc tray guide. After approximately three minutes
have elapsed, open the disc tray guide, attach the disc tray to the machine, then resume printing.
•
If printing is misaligned, adjust the printing position using  Adjust disc print area in Print settings
under  Device settings .
Print settings
557 
						

							Printing with Web Service
Important
•
This function may not be available depending on the country or region of purchase.
Notice for Web Service Printing
Downloading and Printing Template Forms
558 
						

							Notice for Web Service PrintingWhen Using Web Service•
Canon does not guarantee the continuity and reliability of the web services provided, the availability ofsite access, or permission to download the materials.
•
Canon may at any time update, change, or delete the information provided through the web service,or may suspend or discontinue the service without prior notice. Canon shall not be held responsible
for any damages resulting from such actions.
•
In no event shall Canon be liable for any damages whatsoever resulting from the use of the web
services.
•
All or part of the web service may not be available depending on the country or region you live in.
•
Depending on your network environment, some functions on web service are not available. Even if they are available, it may take a while to print or display the contents, or communication may be
interrupted while operation is in progress.
Copyrights and Rights of Publicity
When printing downloaded template forms:
1.
The copyright of each material (photos, illustrations, logos, or documents: hereinafter referred to as "the materials") provided on the web template printing service belongs to their respective owners.
Issues pertaining to Rights of Publicity may arise regarding the use of any of people or characters
displayed on the web template printing service.
Except as otherwise permitted (please see "2" below), copying, modifying or distributing all or a portion of any of the materials contained on the web template printing service without prior consent of
the respective rights (Rights of Publicity and Copyright) holder is strictly prohibited.
2.
All of the materials provided on the web template printing service can be freely used for personal and non-commercial purposes.
559 
						

							Downloading and Printing Template Forms
Important
•
This function may not be available depending on the country or region of purchase.
You can download the template form you want to print from the web service.
Before using the web service, see the terms of service.
Notice for Web Service Printing
Important
•
LAN connection with the machine and internet connection are required to use this function.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   Cloud .
Using the Operation Panel
3.
Tap Web template print .
The category folders of the template form are displayed on the touch screen.
4.
Tap the category folders to display. The template forms in the category folder are displayed on the touch screen.
5.
Tap the template form to print.
6.
Check the message that is displayed, then tap  OK.
7.
Check the print settings.
The print settings are determined automatically according to the specified template form.
To change the print setting, tap the setting item to change the setting.
Note
•
2-sidedPrintSetting  is set to 1-sided.
•
Depending on the template form, some print setting cannot be specified. If it is selected,  and
Error details  are displayed on the touch screen. In this case, tap 
 on the upper left on the
touch screen to confirm the message, then change the setting.
8.
Load paper according to the print settings.
9.
Touch the  Color button.
The machine starts printing.
560