Home > Canon > Printer > Canon printer PIXMA MG7520 User Manual

Canon printer PIXMA MG7520 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG7520 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1047
    							The E-mail Client You Want to Use Does Not Appear in the Screen
    for Selecting an E-mail Client
    Check  Check that the e-mail client's MAPI is enabled.
    Refer to the e-mail client's manual for how to set MAPI.
    If the problem is not solved even when MAPI is enabled, select  None (Attach Manually) in the screen for
    selecting an e-mail client, then manually attach the image to the outgoing e-mail.
    891 
    						
    							Problems with the Machine
    The Machine Cannot Be Powered On
    The Machine Turns Off Unintentionally
    Cannot Connect to Computer with a USB Cable Properly
    Cannot Communicate with the Machine with USB Connection
    The Display on the Touch Screen Cannot Be Seen At All
    An Unintended Language Is Displayed on the Touch Screen
    Cannot Remove a Memory Card
    Print Head Holder Does Not Move to the Position for Replacing
    Printer Status Monitor Is Not Displayed
    If the Output Tray Extension Comes Off
    Cannot Print/Scan from NFC Compliant Device
    892 
    						
    							The Machine Cannot Be Powered On
    Check1 Touch the  ON button.
    Check2
     Make sure that the power plug is securely plugged into the power cord
    connector of the machine, then turn it back on.
    Check3  Unplug the machine from the power supply, then plug the machine back in and
    turn the machine back on after leaving it for at least 2 minutes.
    If the problem is not resolved, contact the service center.
    893 
    						
    							The Machine Turns Off Unintentionally
    Check Deactivate the setting to turn the unit off automatically.
    The machine turns off automatically according to the elapsed time you specified if you activate the setting to turn
    the unit off automatically.
    If you do not want the machine to turn off automatically, open the printer driver setup window and in  Auto Power
    under the  Maintenance  sheet, select  Disable for Auto Power Off .
    Note
    •
    You can activate the setting to turn the machine on/off automatically from the operation panel of the
    machine or ScanGear (scanner driver).
    •
    From the operation panel of the machine:
    About ECO settings
    •
    From ScanGear (scanner driver):
    Scanner Tab
    894 
    						
    							Cannot Connect to Computer with a USB Cable ProperlyPrinting or Scanning Speed Is Slow/Hi-Speed USB Connection Does Not
    Work/"This device can perform faster" Message Is Displayed
    If your system environment is not fully compatible with Hi-Speed USB, the machine will operate at a lower
    speed provided under USB 1.1. In this case, the machine operates properly but printing or scanning
    speed may slow down due to communication speed.
    Check  Check the following to make sure that your system environment supports Hi-
    Speed USB connection.
    •
    Does the USB port on your computer support Hi-Speed USB connection?
    •
    Does the USB cable or the USB hub support Hi-Speed USB connection?
    Be sure to use a certified Hi-Speed USB cable. We recommend that the cable is no longer than around
    10 feet / 3 meters.
    •
    Does the operating system of your computer support Hi-Speed USB connection?
    Obtain and install the latest update for your computer.
    •
    Does the Hi-Speed USB driver operate properly?
    Obtain the latest version of the Hi-Speed USB driver compatible with your hardware and reinstall it on
    your computer.
    Important
    •
    For details on Hi-Speed USB of your system environment, contact the manufacturer of your computer,
    USB cable, or USB hub.
    895 
    						
    							Cannot Communicate with the Machine with USB Connection
    Check1 Make sure that the machine is turned on.
    Check2
     Make sure that the USB cable is connected properly.
    See 
    Connecting the Machine to the Computer Using a USB Cable  to connect the USB cable properly.
    Check3
     Do not start up IJ Network Tool while printing.
    Check4 Do not print while IJ Network Tool is running.
    Check5 Make sure that  Enable bidirectional support  is selected in the Ports sheet of
    the properties dialog box of the printer driver.
    How to Open the Printer Driver Setup Window
    896 
    						
    							The Display on the Touch Screen Cannot Be Seen At All•
    If the POWER lamp is off:
    The machine is not powered on. Connect the power cord and touch the  ON button.
    •
    If the POWER lamp is lit:
    The touch screen may be in the screen-saver mode. Tap the touch screen.
    897 
    						
    							An Unintended Language Is Displayed on the Touch ScreenSelect the language you want to be displayed according to the following procedure.1.
    Touch the  HOME button and wait for about 5 seconds.
    2.
    Flick the HOME screen, then tap  Setup .
    Using the Operation Panel
    3.
    Tap  Device settings .
    4.
    Tap the fifth setting item from the top.
    5.
    Tap the language for the touch screen.
    898 
    						
    							Cannot Remove a Memory CardContact the service center.
    Important
    •
    Never attempt to remove a memory card using a thin stick or tweezers. Doing so may damage themachine.
    Note
    •
    Exclusive adapters are required for the following memory cards. Insert these cards in the machine withadapters attached.
    miniSD Card/miniSDHC Card/microSD Card/microSDHC Card/Memory Stick Micro
    899 
    						
    							Print Head Holder Does Not Move to the Position for Replacing
    Check1 Is the POWER  lamp off?
    Check if the  POWER lamp is lit.
    The print head holder will not move unless the power is on. If the  POWER lamp is off, close the operation panel
    and turn the machine on.
    While the  POWER lamp is flashing, the machine is initializing. Wait until the  POWER lamp stops flashing and
    remains lit, and then open the operation panel again.
    Check2  Is an error message displayed on the touch screen?
    Close the operation panel, follow the Support Code (error number) displayed in the error message to resolve the
    error, and then reopen it. For details on how to resolve the error, refer to 
    Support Code List .
    Check3
     Has the operation panel been left open for 10 minutes or longer?
    If the operation panel is left open for more than 10 minutes, the print head holder moves to the position to protect
    it to prevent the print head from drying out. Close and reopen the operation panel to return the print head holder
    to the position for replacing.
    Check4  Has the machine been printing continuously for a long period?
    Close the operation panel, wait a while, then reopen it.
    If the machine has been printing continuously for a long time, the print head holder may not move to the position
    for replacing since the print head may overheat.
    Note
    •
    Opening the operation panel while printing moves the print head holder to the position to protect it.
    Close the operation panel, and reopen it after printing finishes.
    900 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG7520 User Manual