Canon printer PIXMA MG7520 User Manual

							Making CopiesThis section describes the procedure to copy with  Copy.1.
Make sure that the machine is turned on.
2.
Load paper.
3.
Flick the HOME screen, then tap  Copy .
Using the Operation Panel
The Copy standby screen is displayed.
4.
Load the original on the platen glass.
5.
Specify the settings as necessary.
A.
The copy layout is displayed.
Switch the layout (single-sided/2-on-1/two-sided).
B.
Tap to specify the number of copies.
1.
Flick to specify the number of copies.
2.
Tap to specify the number of copies.
If you keep touching here, the number scrolls by 10.
C.
Tap to display the print setting items.
571 
						

							For details on the setting items:
Setting Items for Copying
D.
Tap to preview an image of the printout on the preview screen.
For details:
Displaying the Preview Screen
E.
Tap to specify the page size.
6.
Touch the Color button for color copying, or the  Black button for black & white copying.
The machine starts copying.
Remove the original on the platen glass after copying is complete.
Important
•
Do not open the document cover or remove the original from the platen glass until scanning is
completed.
Note
•
To cancel copying, touch the  Stop button.
572 
						

							Adding the Copying Job (Reserve copy)
You can add the copying job while printing (Reserve copy). The screen below is displayed when you can add the copying job.
Load the original on the platen glass and touch the same button (the  Color button or the  Black button) as
the one which you previously touched.
Important
•
When you load the original on the platen glass, move the document cover gently.
Note
•
When  Print qlty  (print quality) is set  High, you cannot add the copying job.
•
When you add the copying job, the number of copies or the settings such as the page size or media
type cannot be changed.
•
If you touch the  Stop button while reserve copying is in progress, the screen to select the method to
cancel copying is displayed. If you tap  Cancel all reservations, you can cancel copying all scanned
data. If you tap  Cancel the last reservation , you can cancel the last copying job.
•
If you set a document of too many pages to add the copying job,  Cannot add more copy jobs.
Please wait a while and redo the operation.  may appear on the touch screen. Tap OK and wait a
while, then try copying again.
•
If  Failed to reserve the copy job. Start over from the beginning.  appears on the touch screen
when scanning, tap  OK, then touch the  Stop button to cancel copying. After that, copy the
documents that have not been finished copying.
573 
						

							Displaying the Preview ScreenWhen 
 is displayed on the Copy standby screen, tapping  allows you to preview an image of the
printout on the preview screen.
Important
•
In the following conditions,  is not displayed when the Copy standby screen is displayed.
•
2-sided  is selected for  2-sidedPrintSetting .
•
2-on-1 copy or 4-on-1 copy  is selected for  Layout.
When either of the conditions above is selected, you can set to display the preview screen after
scanning the original is finished.
Two-Sided Copying
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
•
The original will be scanned to display the preview image. Therefore, do not open the document cover until the preview screen is displayed.
•
Originals are rescanned after displaying the preview screen and before copying starts. Therefore, do not open the document cover or remove the original from the platen glass while  Scanning document...
is displayed.
A.
A frame showing the selected page size appears over the image. The inside of the frame will be printed.
B.
The original that is set on the platen glass is displayed. Tap to select  Fit to page. If the displayed image
is skewed, refer to 
Loading Originals  and reset the original properly, then display the preview screen
again and preview the original.
C.
The magnification setting, which was set when the preview screen was displayed, is displayed. If the setting other than  Fit to page is selected, you can change the magnification setting by dragging the bar
on the touch screen.
D.
Tap to specify the magnification.
If you keep touching, the magnification is changed by 10 %.
E.
Tap to return to the Copy standby screen.
F.
The magnification currently specified is displayed. Tap to select  Fit to page.
574 
						

							Setting Items for CopyingYou can change the copy settings such as magnification and intensity.
Print Settings Screen
Note
•
For details on the print setting screen or the setting item for  Photo copy, see Copying Photos .
How to display the print setting screen varies with the copy menu.
•
In  Copy :
The following screen is displayed by tapping  Settings on the Copy standby screen.
•
In Borderless copy  or Frame erase copy :
The following screen is displayed before copying.
Setting Items
You can specify the following setting items.
Flick to display setting items, then tap the setting item to display the settings. Tap to specify the setting.
575 
						

							Note•
Depending on the copy menu, some setting items cannot be selected. This section describes the
setting items in  Copy.
The setting item which cannot be selected is displayed grayed out.
For details on the setting items for  Photo copy, see 
Copying Photos .
•
Some settings cannot be specified in combination with the setting of other setting item or the copy
menu. If the setting which cannot be specified in combination is selected, 
 and  Error details  are
displayed on the touch screen. In this case, tap 
 on the upper left on the touch screen to confirm
the message, then change the setting.
•
The settings of the page size, media type, etc. are retained even if the machine is turned off.
•
When copying starts in the copy menu that is not available with the specified setting,  The specified
function is not available with current settings.  is displayed on the touch screen. Change the
setting, following the on-screen instructions.
1.
Magnif.  (Magnification)
Specify the reduction/enlargement method.
Reducing or Enlarging a Copy
2.
Intensity Specify the intensity.
A.
Tap to activate/deactivate automatic intensity adjustment.When  ON is selected, the intensity is adjusted automatically according to the originals loaded
on the platen glass.
B.
Drag to specify the intensity.
C.
Tap to confirm the intensity setting.
3.
Page size
Select the page size of the loaded paper.
4.
Type  (Media type)
Select the media type of the loaded paper.
5.
Print qlty  (Print quality)
576 
						

							Adjust print quality according to the original.
Important
•
If you use Draft with  Type set to  Plain paper  and the quality is not as good as expected, select
Standard  or High  for Print qlty  and try copying again.
•
Select High for Print qlty  to copy in grayscale. Grayscale renders tones in a range of grays
instead of black or white.
6.
Layout
Select the layout.
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
7.
2-sidedPrintSetting
Select whether to perform two-sided copying.
Two-Sided Copying
577 
						

							Reducing or Enlarging a CopyYou can specify the magnification optionally or select the preset-ratio copying or fit-to-page copying.
The screen below is displayed when you tap  Settings in the Copy standby screen and tap  Magnif. to select
the reduction/enlargement method.A.
Tap to display the screen below.
1.
Flick to specify the magnification.
2.
Tap to specify the magnification.
If you keep touching, the magnification is changed by 10 %.
B.
Flick to specify the magnification.
C.
Tap to confirm the magnification.
Reduction/enlargement Method
Note
•
Some of the reduction/enlargement methods are not available depending on the copy menu.
•
Fit to page
The machine automatically reduces or enlarges the image to fit the page size.
The setting in  Magnif.: Fit to page
Note
•
When you select  Fit to page, the page size may not be detected correctly depending on the
original. In this case, select the setting other than  Fit to page.
578 
						

							•Preset ratio
You can select one of the preset ratios to reduce or enlarge copies.
Select the appropriate ratio for size of original and page size.
The setting in  Magnif.: 70% A4->A5 /86% A4->B5 /94% A4->LTR /115% B5->A4 /141% A5->A4 /156%
5x7->LTR /183% 4x6->LTR
Note
•
Some of the preset ratios are not available depending on the country or region of purchase.
•
Ratio specified copy
You can specify the copy ratio as a percentage to reduce or enlarge copies.
Note
•
400% MAX  (maximum copy ratio) and  25% MIN (minimum copy ratio) are selectable.
•
If you make a copy at the same size as the original, select  Same size.
579 
						

							Two-Sided CopyingWhen you select  2-sided for 2-sidedPrintSetting  in Copy , you can copy two original pages onto the both
sides of a single sheet of paper.
Select  2-sided , then tap  OK.
If you tap  Advanced  with 2-sided  selected, you can specify the orientation and the stapling side of the
original.
•
When you select  Orientation: Portrait  and Output: Long side bind :
•
When you select Orientation: Portrait  and Output: Short side bind :
•
When you select Orientation: Landscape  and Output: Long side bind :
•
When you select Orientation: Landscape  and Output: Short side bind :
After selecting the stapling side, you can select whether you use the preview screen. If you tap  ON, the
preview screen is displayed so that you can check the orientation.
Note
•
If  Device memory is full. Cannot continue process.  appears on the touch screen when scanning, set
the print quality to  Standard, then try copying again. If the problem is not resolved, set the print quality
to  Draft  and try copying again.
•
Two-sided copy setting can be used in combination with  2-on-1 copy or 4-on-1 copy .
Copying Two Pages to Fit onto a Single Page
Copying Four Pages to Fit onto a Single Page
580