Home > Canon > Printer > Canon printer PIXMA MG7520 User Manual

Canon printer PIXMA MG7520 User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Canon printer PIXMA MG7520 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1335 Canon manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    Page
    of 1047
    							Preferences Dialog BoxIn the  Preferences  dialog box, you can make advanced settings to ScanGear (scanner driver) functions via
    the  Scanner , Preview , Scan , and  Color Settings  tabs.
    Click  Preferences...  in the ScanGear screen to open the  Preferences dialog box.
    Scanner Tab
    Allows you to set the quiet mode, specify the folder in which to save images temporarily, and set the
    music file to play during or at the end of a scan.
    Preview Tab
    Allows you to select what to do with Preview when ScanGear is started, how to display cropping frames
    after previewing images, and the cropping size for thumbnails of scanned documents.
    Scan Tab
    Allows you to select what to do with ScanGear after scanning image.
    Color Settings Tab
    Allows you to select how to adjust color, and specify the monitor gamma value.
    741 
    						
    							Scanner TabOn the  Scanner  tab, you can specify the following settings.
    Important
    •
    Available functions and settings vary depending on your scanner or printer.
    Auto Power Settings
    You can set to turn the machine on or off automatically.
    Click  Settings...  to display the  Auto Power Settings  dialog box.
    Note
    •
    If the machine is off or bi-directional communication is disabled, a message may appear because
    the computer cannot collect the machine status. In that case, click  OK to exit ScanGear (scanner
    driver).
    Auto Power On Select  Enable  to turn on the machine automatically when data is received.
    Auto Power Off Specify the amount of time you want to set from the list. When this time lapses without any data
    being received, the machine turns off automatically.
    Important
    •
    When using a network compatible model by connecting to a network, the power does not turn off automatically even if  Auto Power Off is set.
    742 
    						
    							Quiet SettingsThe silent function allows you to reduce the operating noise of this machine. Use this when you wish toreduce the operating noise such as when scanning or printing at night.
    Click  Settings...  to set the quiet mode.
    Note
    •
    You can set the quiet mode from the operation panel of the machine, the printer driver, or
    ScanGear.
    No matter how the setting is made, it applies to operations from the operation panel of the machine
    or when printing/scanning from a computer, etc.
    •
    Scanning or printing may take longer than usual when this function is used.
    Do not use quiet mode Select this option when you wish to use the machine with volume of normal operating noise.
    Always use quiet mode Select this option when you wish to reduce the operating noise of the machine.
    Use quiet mode during specified hours Select this option when you wish to reduce the operating noise of the machine during a specified
    period of time.
    Set the  Start time  and End time  during which quiet mode is to be activated.
    Important
    •
    The time specified in  Start time and in End time  must be different.
    •
    If your scanner or printer does not support fax functions, quiet mode is not applied to
    operations (copy, direct print, etc.) performed directly from the machine even if the hours are specified.
    Select Folder Where Temporary Files are Saved Displays the folder in which to save images temporarily. To change the folder, click  Browse... to specify
    another one.
    Sound Settings You can set the machine to play music during/at the end of a scan.
    Select the  Play Music During Scanning  or Play Sound When Scanning is Completed  checkbox,
    then click  Browse...  and specify a sound file.
    You can specify the following files.
    •
    MIDI file (*.mid, *.rmi, *.midi)
    •
    Audio file (*.wav, *.aif, *.aiff)
    •
    MP3 file (*.mp3)
    743 
    						
    							Calibration SettingsWhen you set  Execute at Every Scan  to ON , the scanner will be calibrated every time before
    previewing and scanning, to reproduce correct color tones in scanned images.
    Note
    •
    Even when  Execute at Every Scan  is set to OFF, the scanner may be calibrated automatically in
    some cases (such as immediately after you turn the machine on).
    •
    Calibration may take time depending on your computer.
    744 
    						
    							Preview TabOn the  Preview  tab, you can specify the following settings.
    Preview at Start of ScanGear
    Select what to do with Preview when ScanGear (scanner driver) is started.
    Automatically Execute Preview ScanGear will automatically start previewing at startup.
    Display Saved Preview Image The previously previewed image will be displayed.
    The Color Adjustment Button settings, the Toolbar settings, and the  Advanced Mode tab settings
    are also saved.
    None No preview image will be displayed at startup.
    Note
    •
    Select  None if you do not want to save the preview image.
    Cropping Frame on Previewed Images Select how to display cropping frames after previewing images.
    Execute Auto Cropping on Previewed Images The cropping frame (scan area) will automatically be displayed in the document size afterpreviewing.
    Display the Last Frame on Previewed Images A cropping frame of the same size as the last used cropping frame will be displayed after
    previewing.
    None No cropping frame will be displayed after previewing.
    Cropping Size for Thumbnail View Select the cropping size for thumbnails of scanned documents.
    745 
    						
    							LargerDisplays 105 % (in width and height) of the area displayed for the standard size.
    Standard The standard size.
    Smaller Displays 95 % (in width and height) of the area displayed for the standard size.
    Note
    •
    When you change the  Cropping Size for Thumbnail View  setting, the preview images will be
    refreshed and cropped to the new size. As the preview images are refreshed, the color
    adjustments and other settings applied to them are reset.
    746 
    						
    							Scan TabOn the  Scan tab, you can specify the following settings.
    Status of ScanGear dialog after scanning
    Select what to do with ScanGear (scanner driver) after scanning images.
    Close ScanGear automatically Select this to return to the original application when scanning is completed.
    Do not close ScanGear automatically Select this to return to the ScanGear screen for another scan when scanning is completed.
    Display the dialog to select next action Select this to open a screen and select what to do when scanning is completed.
    Note
    •
    Even if  Do not close ScanGear automatically  or Display the dialog to select next action  is set,
    some applications may not support it.
    747 
    						
    							Color Settings TabOn the  Color Settings  tab, you can specify the following settings.
    Color Adjustment
    Select one of the following.
    Recommended Select this to vividly reproduce the tone of a document on the screen. It is recommended that you
    normally select this setting.
    Color Matching Select this to automatically match the scanner, monitor, and color printer colors, thus reducing time andtrouble to manually match the monitor and printer colors.
    Source(Scanner) Select scanner profile.
    Target Select target profile.
    Monitor Select this checkbox to display preview image with optimum correction for monitor.
    Defaults Returns to the default  Color Matching settings.
    Note
    •
    The Color Adjustment Buttons on the  Advanced Mode tab are not available when you select
    Color Matching .
    •
    This function is available when  Color Mode is Color .
    None Select this to disable color correction provided by ScanGear (scanner driver).
    748 
    						
    							Note•
    Depending on your scanner or printer, this setting may not be available when scanning from the ADF
    (Auto Document Feeder).
    •
    You can select one when  Color Mode is Color  or Grayscale .
    •
    Color Matching is available when ScanGear, monitor, color management-compliant application (such as
    Adobe Photoshop), and printer are set up correctly.
    Refer to the corresponding manual for the monitor, printer, and application settings.
    Monitor Gamma By setting the gamma value of a monitor, you can adjust the input data to the brightness characteristics
    of the monitor. Adjust the value if your monitor's gamma value does not match the default value set in
    ScanGear, and the colors of the original image are not accurately reflected in the monitor.
    Click  Defaults  to return to the default Monitor Gamma value (2.20).
    Note
    •
    Refer to the manual of your monitor to check its gamma value. If it is not written in the manual,
    contact the manufacturer.
    749 
    						
    							Placing Items (When Scanning from a Computer)Learn how to place items on the platen or ADF (Auto Document Feeder) of your scanner or printer. Placeitems correctly according to the type of item to be scanned. Otherwise, items may not be scanned correctly.
    Important
    •
    Do not place objects on the document cover. When you open the document cover, the objects may fallinto your scanner or printer, resulting in malfunction.
    •
    Close the document cover when scanning.
    •
    Do not touch the operation panel buttons or LCD (Liquid Crystal Display) when opening/closing the
    document cover. May result in unintended operation.
    Placing Items (Platen)
    Placing Documents (ADF (Auto Document Feeder))
    Placing Items (Platen)
    Place items as described below to scan by detecting the item type or size automatically.
    Important
    •
    When scanning by specifying the paper size in IJ Scan Utility or ScanGear (scanner driver), align an
    upper corner of the item with the corner at the arrow (alignment mark) of the platen.
    •
    Photos that have been cut to various shapes and items smaller than 1.2 inches (3 cm) square cannot be cropped accurately when scanning.
    •
    Reflective disc labels may not be scanned as expected.
    For Photos, Postcards, Business Cards, or BD/DVD/CDFor Magazines, Newspapers, or Documents
    Placing a Single Item:
    Place the item face-down on the platen, with 0.4 inch (1 cm) or more space between the edges (diagonally striped area)
    of the platen and the item. Portions placed on the
    diagonally striped area cannot be scanned.
    Important
    •
    Large items (such as A4 size photos) that cannot be
    placed away from the edges/arrow (alignment mark) of
    Place the item face-down on the platen and align an upper corner of the item with the corner at the arrow
    (alignment mark) of the platen. Portions placed on the
    diagonally striped area cannot be scanned.
    Important
    •
    Refer to "Loading Originals" for your model from
    Home of the  Online Manual  for details on the
    portions in which items cannot be scanned.
    750 
    						
    All Canon manuals Comments (0)

    Related Manuals for Canon printer PIXMA MG7520 User Manual