Canon printer PIXMA MG7520 User Manual

							Device user settings•
Date display format
Changes the display format of dates when printed.
Note
•
When  ON is selected for  Print date on the print settings screen in printing from a memory card, the
date is printed in the date display format you selected.
Setting Items for Photo Printing Using the Operation Panel of the Machine
•
Read/write attribute
Selects whether to allow data to be written onto memory cards from a computer.
Important
•
Remove the memory card before changing this setting.
Setting Up the Card Slot as the Memory Card Drive of the Computer
•
If you set this setting to  Writable from USB PC or Writable from LAN PC , you cannot print photos
on a memory card using the operation panel of the machine. After you finish operation of the memory card dedicated drive, be sure to set it back to  Not writable from PC. When you turn off the
machine,  Writable from USB PC  or Writable from LAN PC  will be canceled and the setting is
returned to  Not writable from PC  when you turn on the machine next time.
•
When Writable from USB PC  or Writable from LAN PC  is selected, the auto power off setting is
inactive.
For details on the auto power off setting:
About Quiet setting
•
Sound control
Selects the volume.
◦
Keypad volume
Selects the beep volume when tapping the touch screen or the buttons on the operation panel.
◦
Alarm volume
Selects the alarm volume.
•
Device info sending setting
Selects whether you will send the printer usage information to Canon server. The information sent to
Canon will be utilized to develop better products. Select  Agree to send the printer usage information to
Canon server.
•
NFC setting
If you select  Enable, you can print or scan using NFC (Near Field Communication).
271 
						

							PictBridge print settingsYou can change the print settings when printing from a PictBridge (Wireless LAN) compliant device.
Set the print settings to  Default on the PictBridge (Wireless LAN) compliant device when you want to print
according to the settings on the machine.
PictBridge print settings Screen
Disc label print setting Screen
To change print settings from the PictBridge (Wireless LAN) compliant device:
Settings on a PictBridge (Wireless LAN) Compliant Device
PictBridge print settings Screen
Select the print quality, when printing directly from a PictBridge (Wireless LAN) compliant device.
1.
Page size Select the paper size when printing directly from a PictBridge (Wireless LAN) compliant device.When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper size to Default  on
the PictBridge (Wireless LAN) compliant device.
2.
Type  (Media type)
Select the media type when printing directly from a PictBridge (Wireless LAN) compliant device.
When you perform PictBridge (Wireless LAN) settings from the machine, set  Paper type to Default  on
the PictBridge (Wireless LAN) compliant device.
3.
Print qlty  (Print quality)
Select the print quality when printing directly from a PictBridge (Wireless LAN) compliant device.
4.
Border  (Bordered/Borderless print)
Select the bordered/borderless layout. When you perform PictBridge (Wireless LAN) settings from the machine, set  Layout to Default  on the
PictBridge (Wireless LAN) compliant device.
5.
Photo fix
When  Auto photo fix  is selected, the scene or person's face of a shot photo is recognized and the
most suitable correction for each photo is made automatically. It makes a darkened face by backlight
272 
						

							brighter to print. It also analyzes a scene such as scenery, night scene, person, etc. and corrects eachscene with the most suitable color, brightness, or contrasts automatically to print.
Note
•
As a default, photos on a PictBridge (Wireless LAN) compliant device are printed with auto
correction applied.
•
If  No correction  is selected, photos are printed without correction.
6.
Red-EyeCorrection
Select  ON to correct red eyes in portraits caused by flash photography.
Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may be corrected.
7.
Tap to specify the print settings.
Disc label print setting Screen The  Set disc print area  screen is displayed, and you can perform settings for printing on a printable disc
from a PictBridge (Wireless LAN) compliant device.
Follow the procedure below to perform disc label print setting.
1.
Adjust the printing area (the outer/inner diameter of the printable disc).
A.
Tap to specify the outer diameter.
B.
Tap to specify the inner diameter.
C.
Tap to specify the printing area.
Note
•
Measure the outer and inner diameters of the printing surface of the printable disc and make
sure you set a value smaller than the measured value for the outer diameter, and a value larger than the measured value for the inner diameter.
•
Contact the manufacturers of printable discs for details.
2.
Select the type of the printable disc you use.
273 
						

							Note•
If your printable disc is the recommended disc, tap Recommended disc for the suitable density
printing. If not, tap  Other disc.274 
						

							Language selectionChanges the language for the messages and menus on the touch screen.275 
						

							Home screen background colorSelects the background color of the HOME screen. You can select black or white.276 
						

							Firmware updateYou can update the firmware of the machine, check the firmware version, or perform settings of a
notification screen, a DNS server and a proxy server.
Note
•
Only  Check current version  is available when Disable LAN is selected for  Change LAN in LAN
settings .
•
Install update
Performs the firmware update of the machine. If you select  Yes, the firmware update starts. Follow the
on-screen instructions to perform update.
Important
•
When you use this function, make sure that the machine is connected to the Internet.
Note
•
If the firmware update is not complete, check the following and take an appropriate action.
•
When using wired LAN, make sure that the machine is connected to the computer with a LAN cable properly.
•
Check the network settings such as an access point or a router.
•
If  Cannot connect to the server.  is displayed on the touch screen, tap  OK, then try again after
a while.
•
Check current version
You can check the current firmware version.
•
Update notification setting When  Yes is selected and the firmware update is available, the screen to inform you of the firmware
update is displayed on the touch screen.
•
DNS server setup
Performs settings for a DNS server. Select  Auto setup or Manual setup . If you select Manual setup ,
follow the display on the touch screen to perform settings.
•
Proxy server setup
Performs settings for a proxy server. Follow the display on the touch screen to perform settings.
277 
						

							Cassette settingsBy registering the paper size and the media type loaded in the cassette, you can prevent the machine from
misprinting by displaying the message before printing starts when the paper size or the media type of the
loaded paper differs from the print settings.
For details:
Paper Setting for Printing
•
Register cassette paper info
Registers the paper size and the media type you load in the cassette.
Note
•
When you register the paper size and the media type, the screen to select whether you apply the settings to those for copying is displayed. Select  Yes to apply the registered settings to copying.
•
For details on the proper combination of paper settings you can specify by the printer driver or on
the touch screen:
Setting the Media Type with the Printer Driver and on the Printer
Setting the Paper Size with the Printer Driver and on the Printer
•
Detect paper setting mismatch
If you select  Yes, the machine detects whether the paper size and the media type are identical with
those registered in  Register cassette paper info . If printing starts with the settings that do not match,
an error message is displayed on the touch screen.
Note
•
When  No is selected,  Register cassette paper info  or Detect cassette reinsertion  is disabled.
•
Detect cassette reinsertion
If you select  Yes, the machine detects the cassette is reinserted. When the  Register cassette paper
info  screen is displayed, register the paper size and the media type.
278 
						

							Reset settingYou can change the settings back to the default.•
Web service setup only
Reverts the Web service settings back to the default.
•
LAN settings only
Reverts the LAN settings other than the administrator password specified by IJ Network Tool back to the default.
•
Settings only
Reverts the settings such as the paper size or media type back to the default.
•
Device info sending setting only
Reverts only the device information sending settings.
•
Reset all
Reverts all settings you made to the machine back to the default. The administrator password specified by IJ Network Tool reverts to the default setting.
Note
•
You cannot change the following setting items back to the default:
•
The language displayed on the touch screen
•
The background color of the HOME screen
•
The current position of the print head
•
The  Read/write attribute  setting
279 
						

							About ECO settingsThis setting allows you to use automatic duplex printing as a default to save paper and to turn the machine
on/off automatically to save electricity.
Using Duplex Printing
Using Power Saving Function
Using Duplex Printing
Follow the procedure below to use duplex printing.
1.
Make sure that the machine is turned on.
2.
Flick the HOME screen, then tap   ECO settings .
Using the Operation Panel
3.
Tap Two-sided printing setting .
4.
Specify the settings as necessary.
A.
Tap to select two-sided copying as a default.
B.
Tap to select duplex printing PDF files saved on a memory card as a default.
C.
Tap to select two-sided printing of template forms on the machine as a default.
D.
Tap to specify the print settings.
Note
•
When duplex printing is selected, the  icon is displayed on the setting items for duplex
printing on each print setting screen.
Using Power Saving Function
Follow the procedure below to use power saving function.
1.
Make sure that the machine is turned on.
280